Vehicle Security Barriers compact lightweight crash barriers perfect for low

Advantages

1. Ultra-Lightweight and Portable

Weighing only 13.4kg, it leads the market among comparable products. A single person can easily handle transport, unfolding, and deployment without the need for forklifts or auxiliary tools. The foldable design reduces its thickness to approximately 80mm when folded, allowing it to fit into a vehicle trunk for "carry-on-board, deploy-on-demand" convenience.

2. Purely Mechanical Interception

Featuring a purely mechanical structure, it does not rely on any electrical, hydraulic, or pneumatic devices. Upon vehicle impact, it lifts the front wheels and uses ground friction braking to bring the vehicle to a stop within a short distance. Unaffected by weather or environmental conditions, it performs reliably in rain, snow, sandstorms, high heat, and extreme cold.

3. Safe and Non-Combustible

The main body is made of aluminum profiles with inherent non-combustible properties. Even in the event of a fire on site, the barrier will not support combustion, melt, drip, or produce hazardous flying debris, effectively preventing secondary disasters and protecting vehicle occupants, construction personnel, and surrounding structures.

4. High Durability

The surface features electrostatic powder coating. The yellow/orange-yellow finish provides strong adhesion and maintains its appearance without fading or rusting even after long-term outdoor use, ensuring consistently high visibility. The aluminum itself is corrosion-resistant and adapts well to various outdoor weather conditions.

5. Low Maintenance Cost

The rubber plates at the base are made of high-wear-resistance materials, providing reliable braking force while offering a long service life. The rubber plates are replaceable wear parts – when worn, only the rubber plates need to be replaced, not the entire barrier, significantly reducing maintenance costs.

6. Flexible Functional Expansion

The side handles are not only for carrying but also allow quick attachment of a cold-light arrow guide sign with hook-and-loop tape. The guide sign provides clear guidance in nighttime or low-visibility conditions, giving the barrier dual functions of interception and traffic guidance – multi-purpose use.

Application Scenarios and Methods

Applicable Scenarios:

• Low-speed urban sections with speed limits of 30 km/h or below

• Temporary municipal road maintenance (manhole cover repairs, pavement marking, streetlight maintenance, etc.)

• Residential construction site isolation (road resurfacing, pipeline repairs, landscaping, etc.)

• Temporary traffic control (event road closures, lane reductions, accident scene isolation, etc.)

Deployment Method:

• Remove the barrier from storage and lay it flat on the ground with the rubber plate facing down

• Grasp both sides with both hands and pull outward to fully unfold

• Place it transversely at the location requiring protection, facing oncoming traffic

• Ensure the rubber plate at the base is in full contact with the ground

Removal and Storage:

• Remove the guide sign (if attached)

• Clean the surface and the rubber plate at the base

• Fold inward from both sides and store in a dry, ventilated area

One person can complete deployment or removal in two minutes – carry it in the vehicle and respond anytime.

Product Q&A

Q: What is this product?

A lightweight mobile crash barrier used for perimeter isolation around construction zones to prevent vehicle intrusion, protecting on-site personnel and equipment.

Q: What are the core highlights of the product?

Ultra-lightweight at 13.4kg, foldable design, purely mechanical interception – no power or hydraulics required. One person can deploy it in two minutes without electricity.

Q: What scenarios is it suitable for?

Low-speed urban sections with speed limits of 30 km/h or below, municipal road maintenance, residential construction, temporary traffic control, and similar scenarios.

Q: How does it achieve interception?

Upon vehicle impact, the barrier lifts the front wheels, transfers the force to the ground via the lever principle, and uses rubber plate friction against the road surface to brake, bringing the vehicle to a stop within a short distance. The entire process is purely mechanical, requiring no electronic or hydraulic devices.

Q: What are the material characteristics?

The main body is made of aluminum profiles – lightweight, high-strength, corrosion-resistant, non-combustible, and 100% recyclable. The rubber plates at the base are highly wear-resistant and anti-aging, and can be replaced separately when worn.

Q: How is it deployed and stored?

Deployment: Remove and lay flat (rubber plate facing down) → Pull outward to fully unfold → Place transversely facing oncoming traffic → Confirm ground contact. Takes about 2 minutes.
Storage: Clean, fold inward from both sides, and store in a dry, ventilated area.

Q: Can it be reused after impact?

Minor deformation – reusable. Severe deformation (obvious bending, breakage, or inability to unfold) – replace immediately. Do not reuse.

Q: What are the advantages?

Lightweight (13.4kg), foldable, purely mechanical, non-combustible, electrostatic coating for durability, low maintenance cost, and can be paired with a guide sign for multi-purpose use.

Q: What customers is it suitable for?

Municipal engineering contractors, residential property management, road maintenance units, temporary event organizers, traffic management departments, and other customers requiring rapid deployment and flexible relocation.

Q: How to purchase?

Contact sales representatives or authorized dealers. Custom packaging and colors are available upon request. Spare parts supply and after-sales support are provided.