G7013 PO Hot Melt Adhesive for Automotive Air Filters – High Bond Strength,

G7013 is a PO hot melt adhesive developed for automotive air filter manufacturing, providing reliable adhesion and flexible bonding performance for filter pleat fixation.

Designed to support stable filter construction, G7013 helps maintain secure pleat positioning while accommodating the flexibility required in automotive filter production. Its strong adhesion and lasting flexibility contribute to consistent bonding performance and reliable filter structure.

With rapid setting after application, G7013 supports efficient handling and continuous production without solvent evaporation or extended drying time. It can be considered for manual, semi-automatic, or automated manufacturing processes, subject to the filter design, application equipment, and production requirements.

Flexible Pleat Fixation for Automotive Air Filter Manufacturing

Pleat fixation is an important step in automotive air filter production, as stable adhesive lines help maintain the intended pleat geometry and support consistent filter construction during handling and assembly.

G7013 is a PO hot melt adhesive developed for automotive air filter manufacturing. It combines strong adhesion with flexibility to help secure pleat positions while accommodating the movement and handling requirements of the finished filter element.

Typical applications include:

• Automotive air filter pleat fixation

• Pleat-line bonding in automotive filter production

• Stabilization of folded filter media

• Adhesive application during air filter element manufacturing

• Automotive filter construction and assembly

For manufacturers, G7013 offers a fast-setting bonding solution that supports efficient handling after application. Its flexible adhesive properties help maintain secure pleat positioning without relying on a rigid bond line, supporting a consistent manufacturing process.

G7013 can be evaluated in manual, semi-automatic, or automated production lines, depending on the filter design, dispensing system, application temperature, and production speed.

For specific applications, adhesive suitability should be assessed based on the filter structure, required flexibility, bonding pattern, equipment configuration, and operating conditions. Testing with actual filter materials under representative production conditions is recommended before final selection.

Applications in Automotive Air Filter Production

G7013 is designed for automotive air filter manufacturing, where dependable pleat fixation helps maintain the intended filter geometry and supports consistent element construction.

Typical applications include:

• Automotive air filter pleat fixation

• Fold-line stabilization during filter production

• Adhesive bonding for pleated filter elements

• Maintaining consistent pleat spacing and positioning

• Automotive air filter element manufacturing

G7013 provides a fast-setting hot melt solution for securing pleated filter structures during production. Its combination of adhesion and flexibility helps maintain stable fixation while supporting efficient handling after application.

The adhesive can be evaluated for different production setups, including manual, semi-automatic, and automated application systems. Suitability depends on the filter design, adhesive application pattern, operating temperature, equipment configuration, and line speed.

Before final selection, testing under actual manufacturing conditions is recommended to assess adhesion strength, flexibility, pleat stability, and compatibility with the intended production process.

In automotive air filter manufacturing, adhesive odor can be an important consideration, especially in production areas where hot melt application is part of a continuous manufacturing process.

G7013 is a PO hot melt adhesive developed for automotive air filter production. Its hot melt application process does not rely on solvent evaporation, while its low-odor characteristics can help support a more comfortable working environment during adhesive application.

By combining dependable pleat fixation with low-odor processing, G7013 offers a practical solution for manufacturers seeking consistent bonding performance and efficient production. Actual odor and VOC performance should be confirmed under the intended application temperature and production conditions.

In automotive air filter manufacturing, adhesive consumption depends on the pleat design, bonding pattern, and dispensing settings. Applying the right amount of adhesive helps secure the pleats while minimizing excess glue and unnecessary material costs.

G7013 is a PO hot melt adhesive developed for automotive air filter production. With suitable application parameters, it can support consistent pleat fixation and controlled adhesive distribution throughout the manufacturing process.

Properly adjusted application settings can help manufacturers optimize:

For high-volume production, controlled dispensing can help balance reliable pleat fixation with efficient adhesive use. The appropriate adhesive amount depends on filter geometry, pleat spacing, application pattern, equipment settings, and line speed.

Testing under actual production conditions is recommended to establish the suitable dispensing parameters and achieve the required bonding performance with efficient adhesive consumption.

Reliable Pleat Fixation for Automotive Air Filter Applications

G7013 is a PO hot melt adhesive developed for automotive air filter manufacturing. It provides reliable adhesion and flexible fixation to help maintain the intended pleat arrangement and support consistent filter element construction.

Pleat-Line Stabilization

For securing folded filter media and helping maintain stable pleat positioning throughout filter production.

Consistent Pleat Spacing

For applications requiring uniform spacing between pleats to support the intended filter geometry.

Folded Media Fixation

For holding pleated filter media in position during manufacturing and subsequent handling.

Automotive Filter Element Assembly

For integrating hot melt application into automotive air filter production, supporting efficient processing and consistent product construction.

Flexible Adhesive Bonding

For applications requiring dependable adhesion while retaining flexibility in the bonded filter structure.

Looking for a hot melt adhesive for automotive air filter manufacturing? G7013 can be evaluated under your actual production conditions to assess its suitability for pleat fixation and consistent filter construction.

Share your filter design, pleat configuration, required bonding performance, application method, or current adhesive specifications with us. These details will help us understand your manufacturing requirements and identify a suitable adhesive solution.

We recommend testing G7013 with your actual filter materials and application equipment to evaluate adhesion strength, flexibility, pleat stability, and adhesive consumption before final selection.