G7013 Polyolefin Hot Melt Granules for Automotive Filter Pleating – Uniform

Adhesive application plays a key role in automotive filter production. The position, width, and distribution of each adhesive line can influence filter construction, material utilization, and the consistency of finished components.

G7013 is a polyolefin (PO) hot melt adhesive intended for automotive air filter manufacturing. Its coating characteristics make adhesive distribution an important consideration when setting up the application process. Matching the dispensing pattern to the filter design can help avoid uneven glue lines and unnecessary adhesive buildup.

For production teams, key process parameters include adhesive temperature, nozzle configuration, dispensing rate, and line speed. These factors should be coordinated to achieve a consistent application pattern without compromising the required fixation of the folded filter structure.

A systematic production trial can help establish suitable process settings, identify opportunities to improve adhesive utilization, and maintain consistent results across manufacturing batches.

Maintaining Bond Integrity in Automotive Filter Pleating

In pleated automotive filter elements, adhesive lines must remain intact as the media is folded into its final configuration. Bond-line continuity and flexibility are important considerations when evaluating adhesive performance for this type of application.

G7013 is a polyolefin (PO) hot melt adhesive developed for middle-layer bonding in PU filter pleating. Its coating behavior supports even adhesive distribution, while its flexible bond line helps accommodate the shaping and handling involved in filter manufacturing.

Application considerations include:

• Bond-line continuity across the pleated structure
• Uniform adhesive distribution during application
• Retention of the intended pleat arrangement
• Flexibility of bonded areas during shaping and handling
• Consistent results across production batches

For manufacturers, the objective is to achieve the required fixation without excessive adhesive buildup or uneven coating. Dispensing conditions should be adjusted to suit the filter geometry and production setup.

Evaluation should focus on the finished pleated structure, including adhesive distribution, bond integrity after folding, and consistency throughout the manufacturing process.

Where G7013 Fits into Automotive Filter Manufacturing

Automotive air filter production involves several stages in which adhesive application may contribute to the formation and assembly of the filter element. Selecting a suitable hot melt adhesive requires consideration of the specific operation, equipment setup, and finished filter design.

Pleated Media Processing

For manufacturing steps where folded filter media needs to be held in its intended arrangement before further assembly.

Adhesive Application Station

Suitable for processes where adhesive placement and line consistency are important to achieving uniform fixation across the filter element.

For processes where adhesive fixation helps preserve the filter element configuration as components move between manufacturing stages.

Before implementation, manufacturers should review the adhesive application sequence, equipment capabilities, filter construction, and required output quality. A production trial can help establish whether the adhesive and application method meet the needs of the intended process.

Managing adhesive odor can be an important part of maintaining a comfortable manufacturing environment, especially in facilities where filter components are bonded using heated adhesives throughout the working day.

G7013 is a polyolefin (PO) hot melt adhesive developed for automotive air filter applications. Its application process relies on heat to melt and dispense the adhesive rather than on solvent evaporation. This distinction can be relevant when manufacturers review adhesive handling practices and workplace air quality.

The perceived odor during use may be affected by the adhesive temperature, heating duration, equipment condition, and local ventilation. Maintaining suitable processing temperatures and following recommended equipment practices can help avoid unnecessary thermal exposure.

Manufacturers evaluating G7013 should assess odor under their normal production conditions. Any specific low-odor or VOC-related claims should be supported by appropriate product data or testing.

In automotive air filter manufacturing, adhesive placement must follow the intended bonding pattern without creating unnecessarily thick glue lines or leaving gaps in critical areas. Both application accuracy and the amount of adhesive deposited can affect filter construction and production costs.

G7013 is a PO hot melt adhesive designed for automotive air filter applications. With a suitably configured dispensing system, it can be applied in controlled glue lines to meet the bonding requirements of different filter designs.

Effective application control helps manufacturers manage several production variables:

• Glue-line precision: Place adhesive where bonding is required.

• Usage per filter: Avoid unnecessary adhesive buildup and excess consumption.

• Process repeatability: Maintain more consistent application across production runs.

• Material efficiency: Balance adhesive coverage with the required bonding performance.

Application settings should be matched to the filter structure, bonding pattern, equipment configuration, and line speed. The goal is to achieve the required pleat stability with an appropriate adhesive deposit, rather than simply reducing adhesive usage.

For best results, evaluate G7013 on the actual production line and determine the suitable glue pattern and application quantity based on finished-filter performance and measured adhesive consumption.

Automotive Air Filter Bonding Applications

G7013 is a PO hot melt adhesive developed for automotive air filter manufacturing. It is designed for bonding applications where controlled adhesive placement helps maintain the intended configuration of pleated filter elements.

Pleat Position Control

Supports the positioning of folded filter media, helping maintain the designed pleat arrangement during filter element formation.

Intermediate Bonding Lines

Suitable for applications requiring adhesive lines between pleated sections to help preserve the spacing and geometry of the filter structure.

Bonding During Media Forming

Provides fixation at designated bonding points as the filter media is shaped into its required configuration, helping limit unwanted displacement during processing.

Stability During Handling

Helps keep bonded filter media sections in position during transfer between production stages and subsequent assembly operations.

Integration into Filter Manufacturing

Can be evaluated in automotive filter production processes where hot melt bonding is used to support consistent element construction. Application suitability depends on the filter design, bonding pattern, and production equipment.

Looking for a hot melt adhesive for automotive air filter manufacturing? G7013 can be evaluated under your actual production conditions to assess its suitability for pleat fixation and consistent filter construction.

Share your filter design, pleat configuration, required bonding performance, application method, or current adhesive specifications with us. These details will help us understand your manufacturing requirements and identify a suitable adhesive solution.

We recommend testing G7013 with your actual filter materials and application equipment to evaluate adhesion strength, flexibility, pleat stability, and adhesive consumption before final selection.