Shenzhen ECER Network Technology Co., Ltd.
| Delivery Time | 1 working day |
| Packaging Details | Through Hole,Right Angle,P=2mm |
| Mounting Type | Right Angle |
| Stock | 989 |
| Voltage Rating (Max) | 250V |
| Description | Connector Header 3 position 2mm Pitch 2A Right Angle -25℃~+85℃ |
| Contact Plating | Tin |
| Number of Rows | 1 |
| Contact Material | Brass;PA66 |
| Operating Temperature | -25℃~+85℃ |
| Number of PINs Per Row | 3 |
| Reference Series | PH |
| Flame Retardant Rating | UL94V-0 |
| Pins Structure | 1x3P |
| Pitch | 2mm |
| Model Number | HC-PH-3AW-G |
| Brand Name | HC-PH-3AW-G |
View Detail Information
Explore similar products
CJT(Changjiang Connectors) A1502H-8P
DEALON L125WVS-03PS
Hanbo Electronic HB-PH9-12727PB2GOB
CJT(Changjiang Connectors) A2541WR-2x8P
Product Specification
| Delivery Time | 1 working day | Packaging Details | Through Hole,Right Angle,P=2mm |
| Mounting Type | Right Angle | Stock | 989 |
| Voltage Rating (Max) | 250V | Description | Connector Header 3 position 2mm Pitch 2A Right Angle -25℃~+85℃ |
| Contact Plating | Tin | Number of Rows | 1 |
| Contact Material | Brass;PA66 | Operating Temperature | -25℃~+85℃ |
| Number of PINs Per Row | 3 | Reference Series | PH |
| Flame Retardant Rating | UL94V-0 | Pins Structure | 1x3P |
| Pitch | 2mm | Model Number | HC-PH-3AW-G |
| Brand Name | HC-PH-3AW-G |
This specification applies to the PH series connector strip, covering product performance, test methods, and inspection requirements. It is designed for electrical connectivity with specific environmental and mechanical tolerances.
| Item | Part No. | Type | Material | Finish | Color | Specification |
| Terminal Contact | HC-PH - **** | PT Plug Spring | Phosphor bronze thickness 0.2mm | Tin plating: 35m | - | - |
| Housing Plastic | HC-PH - **** | P Socket | Nylon66 UL94V-0 | - | White | - |
| Wafer | HC-PH - **** | Plastic Socket | Nylon66/LCP UL94-0 | - | Beige | - |
| Contact | HC-PH - **** | Plug Pin | Brass thickness 0.50mm | Tin plating: 2.55m | - | - |
| Item | Rated Voltage | Rated Current | Requirement | Test Mode |
| Electrical Performance | 250V AC/DC | 2A AC/DC | - | - |
| Withstand Voltage | - | - | No breakdown or flashover | Apply 800V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors |
| Contact Resistance | - | - | Initial value 20 | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector (Does not include wire resistance) |
| Insulation Resistance | - | - | 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance |
| Item | Requirement | Test Mode |
| Mechanical Performance | - | - |
| Single contact insertion force | 6N | Housing together with terminal ends with wafer matched at a rate per minute to 253mm inserting force test |
| Single contact Withdrawal force | 0.5N | Terminal and hole seat matched at a rate per minute to 253mm along the wire direction, pulled out from the hole seat |
| Terminal crimping Wire strength | 15N (AWG#22) 13N (AWG#28) | Axial pullout force on crimped wire at a rate per minute of 253mm |
| Pin Retention Force | 50N (AWG#22) 30N (AWG#24) 20N (AWG#26) 15N (AWG#28) | Exerts a force on the pin end at a rate per minute of 253mm until the needle exits Seat pull-out force |
| Fixed terminals And hole seat | 15N | Terminal and hole seat fixed force |
| Durability | Contact Resistance 30m | Mate connectors up 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test |
| Vibration | Current Discontinuity: Max 1 sec Contact Resistance 30m Appearance: No damage | Amplitude: 1.5mm p-p Direction: X, Y, Z axes Frequency: 10-55-10Hz/minute Period: 2 hours for each direction |
| Item | Requirement | Test Mode |
| Environmental Performance | - | - |
| Thermal Aging | Appearance: No damage Contact Resistance 30m | Temperature: 852 Period: 96 hours continuously |
| Temperature Rise | - | Mate connector measure the temperature rise of contact when the maximum rated current is passed |
| Constant Humidity | Appearance: No damage Contact Resistance 30m Insulation Resistance 500m | Temperature: 402C Relative humidity: 90-95% (RH) Period: 96 hours continuously |
| Temperature Cycling | Appearance: No damage Contact Resistance 30m Insulation Resistance 500m Withstand Voltage: No breakdown or flashover | One cycle: -553C (30min) to 853C (30min), room temp transition 10-15min Total cycle: 5 cycles |
| Salt Spray | Appearance: No damage Contact Resistance 30m | Concentration: 51% NaCl solution Temperature: 353C Period: 24 hours (pre-plated stamping) or 8 hours (post-stamping plating) |
| Solder Ability | Soldering Area: 90% | Solder temperature: 2455C Immersion period: 30.5S |
| Resistance to Soldering Heat | Appearance: No damage | Manual Soldering: Soldering time: 30.5S, Soldering pot: 3505C Wave Soldering: Soldering time: 50.5S, Soldering pot: 2305C |
Company Details
Business Type:
Manufacturer
Year Established:
2009
Total Annual:
100000000-20000000
Employee Number:
500~600
Ecer Certification：
Verified Supplier
Shenzhen ECER Network Technology Co., Ltd. is a professional supplier specializing in industrial and power connectors for industrial automation, power systems, electrical equipment, control systems, machinery, and other demanding applications. We focus on providing reliable connector solutions for... Shenzhen ECER Network Technology Co., Ltd. is a professional supplier specializing in industrial and power connectors for industrial automation, power systems, electrical equipment, control systems, machinery, and other demanding applications. We focus on providing reliable connector solutions for...
Get in touch with us
Leave a Message, we will call you back quickly!