Shenzhen ECER Network Technology Co., Ltd.
| Operating Temperature | -25℃~+85℃ |
| Packaging Details | SMD,P=1.25mm,Surface Mount,Right Angle |
| Contact Material | Phosphor Bronze;LCP |
| Z-Height of the Board | 4.05mm |
| Stock | 8954 |
| Y-Width of Bottom Edge on Board | 4.25mm |
| Reference Series | GH |
| Delivery Time | 1 working day |
| Pins Structure | 1x2P |
| Mounting Type | Surface Mount, Right Angle |
| Flame Retardant Rating | UL94V-0 |
| Voltage Rating (Max) | 50V |
| Number of PINs Per Row | 2 |
| Contact Plating | Tin |
| Pitch | 1.25mm |
| Description | Connector Header 2 position 1.25mm Pitch 1A Surface Mount, Right Angle -25℃~+85℃ |
| Number of Rows | 1 |
| X-Length of Bottom Edge on Board (Spacing Line) | 5.8mm |
| Brand Name | JUSHUO |
| Model Number | GH125-S02DCA-00 |
View Detail Information
Explore similar products
CJT(Changjiang Connectors) A1502H-8P
DEALON L125WVS-03PS
Hanbo Electronic HB-PH9-12727PB2GOB
CJT(Changjiang Connectors) A2541WR-2x8P
Product Specification
| Operating Temperature | -25℃~+85℃ | Packaging Details | SMD,P=1.25mm,Surface Mount,Right Angle |
| Contact Material | Phosphor Bronze;LCP | Z-Height of the Board | 4.05mm |
| Stock | 8954 | Y-Width of Bottom Edge on Board | 4.25mm |
| Reference Series | GH | Delivery Time | 1 working day |
| Pins Structure | 1x2P | Mounting Type | Surface Mount, Right Angle |
| Flame Retardant Rating | UL94V-0 | Voltage Rating (Max) | 50V |
| Number of PINs Per Row | 2 | Contact Plating | Tin |
| Pitch | 1.25mm | Description | Connector Header 2 position 1.25mm Pitch 1A Surface Mount, Right Angle -25℃~+85℃ |
| Number of Rows | 1 | X-Length of Bottom Edge on Board (Spacing Line) | 5.8mm |
| Brand Name | JUSHUO | Model Number | GH125-S02DCA-00 |
Product Name: 1.25mm(
Product Model: GH125-S**DCA-00
Description: This product specification applies to the GH series products.
Application Scenarios: Applicable to GH series products.
SHENZHEN JUSHUO ELECTRONIC CO.,LTD
China (implied by company address)
ROHS environmental protection requirements
Inner packing: joint and several; Outer packing: carton. Product sealed in box, do not shake.
| Item | Specification | Unit |
|---|---|---|
| Rated Voltage | 50 | V AC/DC |
| Rated Current | 1.0 | A |
| Operating Temperature Range | -25 to 85 | |
| Operating Humidity Range | Below 90% | Relative Humidity |
| Storage Temperature Range | -20 to 50 | |
| Storage Humidity Range | Not more than 90% | Relative Humidity |
| Transport Temperature Range | -20 to 50 |
| Part Name | Model | Material |
|---|---|---|
| Base | GH | LCP E130i |
| Pin | GH | Phosphor copper |
| Stator | GH | Phosphor copper |
| Item | Test Method | Performance Requirement |
|---|---|---|
| Contact Resistance | Plug in the connector and test with a contact resistance meter. | 20 m Max |
| Insulation Resistance | Apply 100V DC voltage between adjacent contacts and between contacts and enclosure for 1 minute. | 500 M Min |
| Withstand Voltage | Apply 500V AC voltage between adjacent contacts and between contacts and enclosure for 1 minute. | No breakdown and flashover |
| Item | Test Method | Performance Requirement |
|---|---|---|
| Heating Test | Place plug connector in +852 environment for 96H, then in normal environment for 1-2H. | Appearance: No damage. Contact Resistance: 60m Max. |
| Cold Tolerance Test | Place plug connector in -252 environment for 96H, then in normal environment for 1-2H. | Appearance: No damage. Contact Resistance: 60m Max. |
| Moisture Resistance Test | Place plug connector in 402, 90-96% RH environment for 96H, then in normal environment for 1-2H. | Appearance: No damage. Insulation Resistance: 60M Min. Withstand Voltage: 250V AC/min ute MIN. |
| Temperature Cycle | 5 cycles: -253 (30min) -> Room Temp (1H) -> +853 (30min) -> Room Temp (1H). Recover 2H. | Appearance: No abnormalities. Contact Resistance: 60m Max. |
| Salt Spray Test | Continuous spray with 5%1% NaCl solution for 24H. Wash with distilled water, recover 1-2H. | Appearance: No damage or corrosion. Contact Resistance: 60m Max. |
| Weldability | Dip in 2605 tin solution for 2.50.5 seconds. | Tin coverage area: 95% or more. |
| Soldering Resistance | Place connector on PCB, reflow or wave solder at 2605 for 51S. | 1. Plastic parts: No obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications. |
| Item | Test Method | Performance Requirement |
|---|---|---|
| Pin Fixing Force | Fix pin holder, apply force at 253mm/min until pin withdraws. | Single pin: 5N Min |
| Terminal Retention in Plastic Parts | Pull terminal out of socket at 253mm/min along conductor direction. | Single terminal: 7N Min |
| Mechanical Life | Plug and unplug 30 times at 10 times/min without power. | Contact Resistance: 80m Max. |
| Terminal Crimp Wire Strength | Axial pullout force at 253mm/min. | 26AWG wire: 17.8N. 28AWG wire: 8.9N. 30AWG wire: 4.4N. 32AWG wire: 2.2N. |
| Insertion/Pull-out Force | Fit socket and terminal, test insertion/removal on the same axis (remove socket lock). Test speed: 205mm/min. | Insertion Force: 2N (Per pin). Pull-out Force: 0.3N (Per pin). |
Company Details
Business Type:
Manufacturer
Year Established:
2009
Total Annual:
100000000-20000000
Employee Number:
500~600
Ecer Certification：
Verified Supplier
Shenzhen ECER Network Technology Co., Ltd. is a professional supplier specializing in industrial and power connectors for industrial automation, power systems, electrical equipment, control systems, machinery, and other demanding applications. We focus on providing reliable connector solutions for... Shenzhen ECER Network Technology Co., Ltd. is a professional supplier specializing in industrial and power connectors for industrial automation, power systems, electrical equipment, control systems, machinery, and other demanding applications. We focus on providing reliable connector solutions for...
Get in touch with us
Leave a Message, we will call you back quickly!