Shenzhen ECER Network Technology Co., Ltd.
| Packaging Details | P=2mm |
| Pitch | 2mm |
| With Locker | Non-Latching |
| Row Spacing | 4mm |
| Number of Rows | 2 |
| Delivery Time | 2-4 weeks |
| Operating Temperature | -25℃~+85℃ |
| Plastic Material | PBT |
| Number of Positions or Pins | 2x3P |
| colour | White |
| Description | Connector Housing 6 Position 2mm Pitch Dual Row JWPF Series PBT -25℃~+85℃ |
| Reference Series | JWPF |
| With Wings | Without Fins |
| Stock | 2000 |
| Number of PINs Per Row | 3 |
| Model Number | HC-JWPF-2x3SY-05 |
| Brand Name | HCTL |
View Detail Information
Explore similar products
TE Connectivity 292250-6
DEALON DZ127R-11-04-25
hanxia HX PM1.27-2x2P TP H3.4
FOXCONN 3S102023-011-7F
Product Specification
| Packaging Details | P=2mm | Pitch | 2mm |
| With Locker | Non-Latching | Row Spacing | 4mm |
| Number of Rows | 2 | Delivery Time | 2-4 weeks |
| Operating Temperature | -25℃~+85℃ | Plastic Material | PBT |
| Number of Positions or Pins | 2x3P | colour | White |
| Description | Connector Housing 6 Position 2mm Pitch Dual Row JWPF Series PBT -25℃~+85℃ | Reference Series | JWPF |
| With Wings | Without Fins | Stock | 2000 |
| Number of PINs Per Row | 3 | Model Number | HC-JWPF-2x3SY-05 |
| Brand Name | HCTL |
Description: 2.0MM PITCH JWPF CONNECTOR DOUBLE ROW TYPE
Scope: This specification covers the 2.00 series connector strip, including product performance, test methods, and inspection requirements.
Applicable Wire Sizes: AWG #2226
Applicable PC board thickness: 0.8l.6mm
HCTLDZ
Shenzhen, China
JWPF (2.00) Series-05
HC-JWPF - ****
2019/7/25
A
PBT UL94V-O(2)
Phosphor bronze
White
Tin plating: 35 m
ROHS
Disc loading material, plastic shell packaging, plastic tubes, carton
| Item | Requirement | Test Mode | Details |
|---|---|---|---|
| Use Condition | |||
| Ambient temperature Range | -25 +85 | ||
| Applicable Wire Sizes | AWG #2226 | ||
| Applicable PC board thick:ness | 0.8l.6mm | ||
| Electrical Performance | |||
| Rated Voltage | 100V AC/DC | ||
| Rated Current | 3A AC/DC | ||
| Contact Resistance | Initial value 20m | Mate connector | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector (Does not include wire resistance) |
| Insulation Resistance | 1000 M | Mate connector | Apply 1000V AC(rms) for 1 minute between adjacent terminals and ground, leakage current must be less than 0.5mA |
| Withstand voltage | No breakdown or flashover | Mate connector | Apply 500V DC(rms) for 1 minute between adjacent contacts |
| Mechanical Performance | |||
| Single contact insertion force | 5N | Mate connector | Insert force test at a rate of 253mm per minute |
| Single contact Withdrawal force | 0.5N | Mate connector | Withdrawal force test at a rate of 253mm per minute |
| Terminal crimping Wire strength | 15N (AWG#22), 20N (AWG#24), 30N (AWG#26) | Percontact | Axial pullout force test at a rate of 253mm per minute |
| Pin Retention Force | 50N | Percontact | Seat pull-out force test at a rate of 253mm per minute until the pin exits |
| Durability | Contact Resistance 40m | Mate connectors | 30 cycles of insertion and withdrawal at a rate of 10 cycles per minute prior to environmental test |
| Vibration | Current Discontinuity: 1 sec Max, Contact Resistance 40m | Mate connectors | Amplitude: 1.5mm p-p, Frequency: 10-55-10 Hz/minute, Period: 2 hours for each direction (X, Y, Z axis) |
| Environmental Performance | |||
| Thermal Aging | Contact Resistance 40m, Appearance: No damage | Mate connector | Temperature: 852, Period: 96 hours continuously |
| Constant Humidity | Contact Resistance 40m, Insulation Resistance 1000m, Appearance: No damage | Mate connector | Temperature: 402, Relative humidity: 90-95%, Period: 96 hours continuously |
| Temperature cycling | Contact Resistance 40m, Insulation Resistance 1000m, No breakdown or flashover | Mate connector | One cycle: -553C for 30min, room temp transition 10-15min; 853C for 30min, room temp transition 10-15min. Total cycle: 5 cycles. |
| Salt spray | Contact Resistance 40m, Appearance: No damage | Mate connector | Solution: 51% NaCl, Temperature: 353. Process: 48 hours before plating, 8 hours after plating. |
| Packaging, Transportation, Storage | |||
| Packaging | Terminal: disc loading material; Housing: plastic shell packaging, plastic tubes; Seat: disc loading, bag loading. Certificate included. Exterior: carton with packing list. Product must not rock in the box. | ||
| Transportation | Any vehicle can be adopted, but must be moisture-proof and protected from mechanical damage. | ||
| Storage | Environment: -20 +40, relative humidity 80%, no corrosive gases. Re-qualification test required if stored for over 6 months. |
Company Details
Business Type:
Manufacturer
Year Established:
2009
Total Annual:
100000000-20000000
Employee Number:
500~600
Ecer Certification：
Verified Supplier
Shenzhen ECER Network Technology Co., Ltd. is a professional supplier specializing in industrial and power connectors for industrial automation, power systems, electrical equipment, control systems, machinery, and other demanding applications. We focus on providing reliable connector solutions for... Shenzhen ECER Network Technology Co., Ltd. is a professional supplier specializing in industrial and power connectors for industrial automation, power systems, electrical equipment, control systems, machinery, and other demanding applications. We focus on providing reliable connector solutions for...
Get in touch with us
Leave a Message, we will call you back quickly!