Shenzhen ECER Network Technology Co., Ltd.
| X-Length of Bottom Edge on Board (Spacing Line) | 8.3mm |
| Pitch | 1.25mm |
| Mounting Type | Surface Mount,Vertical |
| Number of PINs Per Row | 4 |
| Reference Series | GH |
| Contact Material | Phosphor Bronze;LCP |
| Operating Temperature | -25℃~+85℃ |
| Delivery Time | 1 working day |
| Number of Rows | 1 |
| Flame Retardant Rating | UL94V-0 |
| Description | Connector Header 4 position 1.25mm Pitch 1A Surface Mount,Vertical -25℃~+85℃ |
| Contact Plating | Tin |
| Pins Structure | 1x4P |
| Y-Width of Bottom Edge on Board | 4.25mm |
| Stock | 6375 |
| Voltage Rating (Max) | 50V |
| Packaging Details | SMD,P=1.25mm |
| Z-Height of the Board | 4.05mm |
| Model Number | GH125-S04CCA-00 |
| Brand Name | JUSHUO |
View Detail Information
Explore similar products
TE Connectivity 292250-6
DEALON DZ127R-11-04-25
hanxia HX PM1.27-2x2P TP H3.4
FOXCONN 3S102023-011-7F
Product Specification
| X-Length of Bottom Edge on Board (Spacing Line) | 8.3mm | Pitch | 1.25mm |
| Mounting Type | Surface Mount,Vertical | Number of PINs Per Row | 4 |
| Reference Series | GH | Contact Material | Phosphor Bronze;LCP |
| Operating Temperature | -25℃~+85℃ | Delivery Time | 1 working day |
| Number of Rows | 1 | Flame Retardant Rating | UL94V-0 |
| Description | Connector Header 4 position 1.25mm Pitch 1A Surface Mount,Vertical -25℃~+85℃ | Contact Plating | Tin |
| Pins Structure | 1x4P | Y-Width of Bottom Edge on Board | 4.25mm |
| Stock | 6375 | Voltage Rating (Max) | 50V |
| Packaging Details | SMD,P=1.25mm | Z-Height of the Board | 4.05mm |
| Model Number | GH125-S04CCA-00 | Brand Name | JUSHUO |
Product Name: WAFER
Description: 1.25mm Pitch wafer patch socket Connectors with latch.
Usage: Suitable for FPC/FFC mating.
Environmental Compliance: Products comply with ROHS environmental requirements.
JUSHUO ()
Shenzhen, China
jushuo.net.cn
jushuo518@163.com
0755-27220896
| Item | Specification | Requirement |
|---|---|---|
| Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | [AC/DC (Virtual value) 50Hz] | 1A |
| Ambient temperature Range | (including terminal temperature rise) | -45 +85 |
| Part Name | Model | Material |
|---|---|---|
| Base | GH125-S**CCA-00 | LCP |
| Pin | Phosphor copper | |
| Stator | Phosphor copper |
| Item | Test Condition | Requirement |
|---|---|---|
| Contact Resistance | Plug in the connector and test with a contact resistance meter to measure both terminals of the connector form a closed loop between. | 20 m MAX |
| Insulation Resistance | Plug in the connector and apply 500V DC voltage between the adjacent contacts and between the contacts and the enclosure for 1 minute. | 500M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminals or ground. | No Breakdown |
| Pin fixing force | Fix the pin holder on the drawing machine and apply force on the front end of the pin at a rate of 253mm per minute until the pin is withdrawn from the pin holder. (Single pin) | 5N MIN |
| Terminal Retention in Plastic parts | The terminal shall be matched with the hole seat, and at the rate of 253mm per minute along the conductor direction, the force that the terminal is pulled out of the socket. (Single terminal) | 5N MIN |
| Item | Test Condition | Requirement |
|---|---|---|
| Heat Resistance | Place the connector in an environment of +852 for 96H, then take it out and test after 1-2H in normal environment. | Appearance: No Damage; Contact Resistance: 30 m MAX |
| Cold Resistance | Place the connector in an environment of -452 for 96H, then take it out and test after 1-2H in normal environment. | Appearance: No Damage; Contact Resistance: 30 m MAX |
| Humidity | Place the connector in an environment of 452, relative humidity 90-96% for 96H. After the test, take it out and test after 1-2H in normal environment. | Appearance: No Damage; Insulation Resistance: 30 M MIN; Dielectric Strength: 500V AC/MIN |
| Temperature Cycling | Place the test samples in a high and low temperature test chamber and adjust the temperature according to the following steps: a) Hold at -453 for 30 minutes; b) Hold at normal temperature and humidity for 1H; c) Hold at 853 for 30 minutes; d) Hold at normal temperature and humidity for 1H; a) to d) is one cycle, a total of 5 cycles. Recover in normal environment for 2H before inspection. | Appearance: No Damage; Contact Resistance: 60 m MAX |
| Salt Spray Resistance | The test sample is suspended from the top of the test chamber; sprayed with 452, 5 1% salt water for 48 hours; washed with normal temperature water after the test; then dried at room temperature. | Appearance: No Damage, No Corrosion; Contact Resistance: 30 m MAX |
| Solder Ability | Immerse the sample's soldering surface in a 2455 tin bath for 2.50.5 sec. (0.2 mm from terminal tip) | Tin Area: Above 95%; Appearance: No Damage |
| Soldering Resistance | Place the connector on a PCB board and immerse it in a 2605 tin bath for 50.5 sec. (0.2 mm from terminal tip) | Tin Area: Above 95%; Appearance: No Damage, No Deformation |
| Item | Appearance | Size |
|---|---|---|
| The surface of plastic parts shall be free of obvious scars, mottled, cracked, burr, flash, lack of material and deformation affecting the use; the surface of metal parts shall be smooth and clean, no rust, oxidation, peeling, blackening and obvious mechanical damage. | Reference engineering drawing |
Company Details
Business Type:
Manufacturer
Year Established:
2009
Total Annual:
100000000-20000000
Employee Number:
500~600
Ecer Certification：
Verified Supplier
Shenzhen ECER Network Technology Co., Ltd. is a professional supplier specializing in industrial and power connectors for industrial automation, power systems, electrical equipment, control systems, machinery, and other demanding applications. We focus on providing reliable connector solutions for... Shenzhen ECER Network Technology Co., Ltd. is a professional supplier specializing in industrial and power connectors for industrial automation, power systems, electrical equipment, control systems, machinery, and other demanding applications. We focus on providing reliable connector solutions for...
Get in touch with us
Leave a Message, we will call you back quickly!