DINKONDA GLOBAL Power Plants Special 220VAC/50Hz ± 10%/24VDC, 1-40MPa RF

Product Specification

DINKONDA GLOBAL Power Plants Special 220VAC/50Hz ± 10%/24VDC, 1-40MPa RF 310AK3LW1AZ10 RF Admittance Liquid Level Switch Ash Hopper Sensor

Product Introduction
Radio frequency detection technology and modern microcomputer processing technology have solved the problems of large temperature drift, difficult calibration, and fear of adhesion in traditional level gauges. They are widely used for continuous measurement of liquid, particle, and block material levels in various industries. The special impact resistant and wear-resistant probe sheath material used in this product is particularly suitable for measurement in environments with high temperature, high pressure, strong corrosion, strong adhesion, strong impact, strong wear, and large dust. There are other types of level gauges available.

Product Features
1. Easy calibration: It can be automatically calibrated at once using any two-point warehouse height.

2. Strong adaptability: The special impact resistant and wear-resistant probe sheath material used can reliably work in environments with high temperature, high pressure, strong corrosion, strong adhesion, strong impact, strong wear, and high dust.

3. No maintenance required: Due to the simple structure of the sensor and the absence of movable parts, there is no need for maintenance once it is put into operation.

4. Widely applicable: liquid, solid, interface mixtures, and materials can all be used.

5. LCD display: using LCD display, displaying rich and comprehensive content.

6. No drift: Will not drift due to temperature or density changes in the medium.

Technical Specifications
Applicable objects: Under high temperature, high pressure, flammable, explosive, toxic, corrosive and other working conditions, for materials such as liquids, slurries, powders, particles, blocks, etc
Perform continuous level measurement
Measurement of two-phase liquid interface: such as oil-water interface, etc
Output: 4-20mADC transmission output, corresponding range adjustable, polarity variable
SPDT relay (up to four channels), normally open and normally closed contacts (AC220V 2A). Can be set as high high, high, low, low low alarm: also set as area control to achieve "pumping", "discharging", "adding" or "pumping" functions
The instrument can be connected to the network through this interface, or provide RS-485 communication interface according to Modbus or Hertz protocol
Power supply: 220VAC/50Hz ± 10% or 24VDC
Load characteristics: Maximum load resistance of 600 Ω
Damping: The time constant can be adjusted between 0 and 20 seconds, with a step size of 1 second
Start time: 2 seconds, no preheating required
Accuracy: ± 0.2%, resolution up to 0.002% (for admittance values)
Stability: better than 0.2FS/year
Working pressure: 40MPa, B-grade: 25MPa, C-grade: 10MPa, D-grade: 4MPa, E-grade: 1MPa, F-grade: atmospheric pressure
Temperature range: Controller's ambient temperature: -30~60 ℃
Working temperature of sensor electrical box: -30~70 ℃
Sensor probe working temperature: -150~240 ℃
Humidity range: Relative humidity: 0-90%
Transmission distance: The maximum distance for signal transmission between sensors and control instruments can reach 1000 meters
Structural materials: probe rod: Teflon, corundum, etc
Connection thread: 316SST stainless steel, 1Cr18Ni9Ti stainless steel, etc
Probe electrical box: low copper aluminum alloy
Controller casing: galvanized steel plate with baked paint
Types of probe rods: rod type, coaxial type, cable type, heavy-duty cable type, etc
Process connection: 3/4NPT, 1NPT taper pipe thread; 36 × 2 metric thread; Flanges, etc
Electrical connection: M20 × 1.5 threaded hole

FAQ:
Q1.What about the lead time?
A: 5-7 days for Sample preparing ,15-20 working days for mass production.

Q2. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production.

Q3: Do you offer guarantee for the products?
A: Yes, we offer 1 years warranty to our products.

Q4: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.

Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.

Company Profile

DINKONDA GLOBAL has been developing and supplying equipment and components for specialized thermal power plants and related industries for 20 years and is one of the a market-leading global manufacturers and providers in the industry. We have a professional technical research and development team, professional management talents and dozens of quality inspection personnel. The company has more than 50 CNC machining centers, CNC lathes, various inspection equipment and other professional equipments.
Our comprehensive product portfolio and over 20 years of industry knowledge mean customers can rely on us to deliver innovative, reliable and economic products. Chenglei products are designed and manufactured with quality components and clear user interfaces for quick and safe operation in the field. Our strict product development and testing ensures long-lasting performance and continued reliability. Our independently developed and produced CL series valve electric actuators are widely used in various industries such as Oil & Gas, Water & Power, and Chemical, Process & Industrial .
Customers rely on us for innovative, high quality and dependable products for managing the flow of liquids, gases and powders. We help customers around the world to reduce emissions, improve efficiency, minimize their environmental impact and assure safety.