Model 2400 tissue paper machine

Product Specification

Model. 2400mm Tissue paper making plant

This line consists of stock preparation, Model 2400 tissue paper making machine, and boiler. This is a complete production line from the raw material (could be recycled paper and virgin pulp) to final product tissue jumbo rolls. We can also supply other tissue paper converting machines if you need make the jumbo roll to other products.

What the buyer need to prepare besides the scope of supply is the factory construction; pipes for pulp, water and steam; valves for connecting; water supply; electricity supply; raw material; chemical materials, etc.

1. Technical parameter

1. Raw material: recycled paper, virgin pulp

2. Output paper: High & medium grade of tissue paper

3. Output weight: 13—40g/m²

4. Net paper width: 2400mm

5. Cylinder mould width: 2850mm

6. Capacity: 10T/D (based on 18gsm)

7. Design speed: 250m/min

8. Working speed: 150-200m/min

9. Rail gauge: 3200mm

10. Pulp formation type: pressure mould former

11. Design Standards: CNS Export equipment

12. Dryer: Wire-releasing part: ≥18-24%

         Squeezing-mill releasing part: ≥38-40%

         Manufactured paper dryness: 90-92%

13. Calculated running time in a day: 22.5 hours

14. Calculated outputting rate: 97%

15. Calculated finished product rate: 95%

2. Stock preparation:

3. Paper Making Machine:

Tissue paper making machine consists of cylinder mould section, dryer cylinder section, winding section and drive section.

1. Cylinder mould section:

The cylinder mould section consist of cylinder mould, couch roll, net cage, frame, suction box, guide roll,etc.

1.1 Cylinder mould  

Quantity:       1set

Spec:          φ1800mm*2850mm

Material:       1.5mm*25mm SS tablet-style

Shaft size:      φ299×16mm,material 20＃seamless steel tube;

Shaft head: 45# steel

Bearing: 3532

1.2 Couch roll

Quantity:        1set

Spec:           φ550mm×2850mm

Material:        20＃seamless steel tube, cover with rubber;

Rubber hardness:  shore A38±2°; thickness: 25mm

Bearing: 113520

1.3 Net cage

It adopts wind pressure type net cage for starching , equipped with activity curve plate.

1.4 Suction box

Quantity:            4 sets

Body material:        steel plate

Face plate material:    high molecular polyethylene

1.5 Guide roll

Quantity:   9 sets

Spec:      φ550mm*2850mm

Material:   seamless steel tube, chrome-faced

1.6 Expander roll

Quantity:    1 set

Spec:       φ270mm*2850mm

Material:    seamless steel tube

1.7 Mobile type spray pipe(for rinse cylinder mould and felt): 1set

1.8 Electric tensioner        1set

1.9 Pneumatic corrector      1 set

2. Dryer cylinder section:

The dryer section consist of dryer cylinder, touch roll, frame, hood.

2.1 Dryer cylinder  

Quantity:                1set

Spec:                   φ3000*2850m

Material:                alloy cast iron

Surface hardness:         >HB220

Surface roughness:        ≤0.8μm

Work pressure:           0.3MPa

Water test pressure:       0.5MPa

Bearing:                 3113164

Dryer cylinder accessories:  wheel gear, siphon, steam joint.

2.2 Carrier roll

Quantity:          1set

Spec:             φ750mm*2850mm

Material:          cast iron, cover with rubber;

Rubber hardness:   shore A92±2°; thickness: 25mm

Bearing: 113636

2.3 Dryer hood

Quantity:        1set

Structure:       double layer type

Accessories:     φ500mm axial flow ventilator, 2sets

2.4 Machine frame: cast iron and structural steel

2.5 Scraper

Quantity: 2sets, double layer type

3. Winding section

3.1 winding machine

Quantity:     1set

Size:          φ900×2850mm

Material:      steel plate                        

Bearing:       113520

3.2 Winding roller

Quantity:      3pcs

Size:          φ159×2850mm

   Material:      20＃ seamless steel tube

4. Drive section

4.1 Type of transmission:  AC motor, FC and sectional driving

Two transmission sections

4.2 Motor:             75KW/4, 5.5KW/4

4.3 Reducer:            400type, 350type

4. Boiler:

2T boiler, 1 set

5. Installation:

we will send our engineer to assist factory design, installation and technical training. The buyer must be responsible for the security of seller’s engineer. And the buyer should bear the cost of double way international air tickets, visa, local transportation, lodging and accommodation during this period. And the buyer shall pay USD 2000/•per month.

6. Delivery time: 50 days

Company Homepage:  www.cnpapermachinery.com     www.ppmachine.com