TORICH INTERNATIONAL LIMITED
| Payment Terms | L/C,D/A,D/P,T/T,Western Union |
| Supply Ability | 60000 Ton/Tons per Year |
| Delivery Time | 20-30days upon products |
| Packaging Details | In bundles or in wooden boxes. |
| Application | Heat Exchanger |
| Outer diameter(round) | 30 - 325 mm |
| Thickness | 2 - 50 mm |
| Technique | Cold Drawn,Hot Rolled,Cold Rolled,ERW,Hot Rolled/Cold Drawn |
| Grade | A179 A192 A210 P235GH STB340 |
| Alloy or not | Non-alloy,Is Alloy, |
| Section shape | Round,Rectangular |
| Length | 6M or as requirement,As customer's require,8m,5.8m,2.5-8m |
| Brand Name | TORICH |
| Model Number | A179 |
| Certification | ISO9001 ISO 14001 TS16949 |
| Place of Origin | Zhejiang/China |
View Detail Information
Explore similar products
S235JR Galvanized U-Shaped Structural Steel Pipe for Construction
High Pressure Seamless Carbon Bend Steel Tubing With Wall Thickness 1-15mm
ISO9001-2008 Approved SA213 U Bend Tube , Bending Stainless Steel Tubing
SA192 SA192 SA210 SA213 Bending Steel Tube / Cold Drawn Steel Pipe
Product Specification
| Payment Terms | L/C,D/A,D/P,T/T,Western Union | Supply Ability | 60000 Ton/Tons per Year |
| Delivery Time | 20-30days upon products | Packaging Details | In bundles or in wooden boxes. |
| Application | Heat Exchanger | Outer diameter(round) | 30 - 325 mm |
| Thickness | 2 - 50 mm | Technique | Cold Drawn,Hot Rolled,Cold Rolled,ERW,Hot Rolled/Cold Drawn |
| Grade | A179 A192 A210 P235GH STB340 | Alloy or not | Non-alloy,Is Alloy, |
| Section shape | Round,Rectangular | Length | 6M or as requirement,As customer's require,8m,5.8m,2.5-8m |
| Brand Name | TORICH | Model Number | A179 |
| Certification | ISO9001 ISO 14001 TS16949 | Place of Origin | Zhejiang/China |
| High Light | Cold-Drawn Seamless U Bend Tube ，Low Carbon Steel U-Tube ，Heat Exchanger U-Shaped Tube | ||
ASTM A179 U-bend tubes are seamless, cold-drawn low-carbon steel tubes that are formed into a U-shape for shell-and-tube heat exchangers, condensers, coolers, and similar heat-transfer equipment. The base tube is produced by the seamless process and cold drawing, then bent to the required radius/leg length with strict control of dimensional stability and surface condition.
Product type: U-bend (U-tube) for heat exchangers
Base material / standard: ASTM A179 / A179M (often referenced as SA179 for similar procurement language)
Manufacturing route: Seamless → cold drawn → U-bending (per drawing)
Typical base tube OD range (ASTM A179 scope): 1/8" to 3" (3.2–76.2 mm)
Key U-bend parameters (customized):
Bend radius (CLR), leg length, tangent length, straight length, end finish
Controlled ovality and wall thinning at the bend (measured and reportable)
Excellent heat-transfer suitability: smooth OD/ID, consistent wall, stable geometry from cold-drawn tubing
Reliable forming performance: low-carbon chemistry supports bending, expanding, and rolling operations commonly required for tube-to-tubesheet assembly
Quality verification: chemistry control + mechanical testing + typical tube tests (e.g., hardness/flattening/flaring/hydrostatic or NDT options per order)
How do you control wall thinning and ovality at the U-bend?
We control bending tooling, lubrication, and forming parameters, and can provide bend-area measurements (ovality and wall-thinning). Many buyers specify limits (e.g., ovality and thinning caps) for U-tubes; we can manufacture and inspect to your project criteria and supply inspection records.
What inspections and documentation will I receive?
We provide full traceability by heat/lot and Mill Test Certificate (EN 10204 3.1 available upon request), plus compliance with required tests under ASTM tube requirements (chemical/product analysis and mechanical verification; hydrostatic or nondestructive testing when specified).
How do you prevent contamination and shipping damage (critical for heat exchangers)?
We follow controlled finishing and packing practices (cutting/deburring/cleaning, end caps/sealing, and export packing) to protect tube ends and internal cleanliness during transport and storage.
| Grade / Standard | C | Si | Mn | P | S | Cr | Ni | Cu | Mo | V | Nb | Ti | Al |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ASTM A179 | 0.06–0.18 | — | 0.27–0.63 | ≤0.035 | ≤0.035 | — | — | — | — | — | — | — | — |
| ASTM A192 | 0.06–0.18 | ≤0.25 | 0.27–0.63 | ≤0.035 | ≤0.035 | — | — | — | — | — | — | — | — |
| ASTM A210 Gr. A-1 | ≤0.27 | ≥0.10 | ≤0.93 | ≤0.035 | ≤0.035 | — | — | — | — | — | — | — | — |
| EN 10216-2 P235GH (1.0345) | ≤0.16 | ≤0.35 | ≤1.20 | ≤0.025 | ≤0.020 | ≤0.30 | ≤0.30 | ≤0.30 | ≤0.08 | ≤0.02 | ≤0.01 | ≤0.04 | ≥0.02 |
| JIS G 3461 STB340 | ≤0.18 | ≤0.35 | 0.30–0.60 | ≤0.035 | ≤0.035 | — | — | — | — | — | — | — | — |
Note: “—” indicates not specified in the cited summaries for that grade.
| Grade / Standard | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) | Hardness |
|---|---|---|---|---|
| ASTM A179 | ≥325 | ≥180 | ||
| ASTM A192 | ≥325 | ≥180 | ≥35 | ≤77 HRB |
| ASTM A210 Gr. A-1 | ≥415 | ≥255 | ≥30 | ≤79 HRB |
| EN 10216-2 P235GH (T ≤ 16 mm reference) | 360–500 | ≥235 | ≥25 | — |
| JIS G 3461 STB340 | ≥340 | ≥175 | ≥35 | — |
ASTM: ASTM A179/A179M (base tube) + ASTM A450/A450M (general requirements for carbon/low alloy steel tubes)
EN: EN 10216-2 (pressure-purpose seamless tubes with elevated temperature properties; e.g., P235GH)
GOST: GOST 8733 (technical requirements for cold-deformed seamless pipes) + GOST 8734 (size range for cold-formed seamless tubes)
JIS: JIS G 3461 (carbon steel boiler & heat exchanger tubes; e.g., STB340)
GB: GB/T 3639 (seamless cold-drawn/cold-rolled precision tubes) and project-driven selections such as GB 3087 for boiler service, when specified
Power generation & boilers: condensers, feedwater heaters, economizers (U-tube bundles)
Oil & gas / refining: coolers, condensers, heat-recovery exchangers
Chemical & petrochemical: process heat exchangers, surface coolers
U-bend geometry is used primarily in shell-and-tube exchangers to enable compact multi-pass flow paths and efficient bundle layout.
A: manufacturer,also can do trading.
A: Generally speaking,it is 10-15 days if the goods are in stock,or it is 30-40 days if the goods are not in stock,
it is according to quantity.
A: Yes, we could offer the sample for free charge but need pay the cost of freight.
A: Payment<=2000USD, 100% in advance. Payment>=2000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact with me.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Importer,Exporter,Trading Company,Seller
Year Established:
1997
Total Annual:
25000000-30000000
Employee Number:
100~200
Ecer Certification：
Verified Supplier
#torich-about-brief, #torich-about-brief * { box-sizing: border-box; } #torich-about-brief { --torich-red: #d71920; --torich-dark: #222a31; --torich-text: #4f5962; --torich-muted: #77818a; --torich-line: #e7eaed; --torich-soft: #f6f7f8; width: 100%; color: var(--torich-text); ... #torich-about-brief, #torich-about-brief * { box-sizing: border-box; } #torich-about-brief { --torich-red: #d71920; --torich-dark: #222a31; --torich-text: #4f5962; --torich-muted: #77818a; --torich-line: #e7eaed; --torich-soft: #f6f7f8; width: 100%; color: var(--torich-text); ...
Get in touch with us
Leave a Message, we will call you back quickly!