Reenterable Two Component Circuit Board Potting Compound High Hardness For

High Hardness High Transparency  UV-Resistant PU potting compound For Outdoor                                                                                                   

Product Description

The BZ-510 is a polyurethane encapsulation material with UV and yellowing resistance for 5 years or longer. It features a high hardness of 60D, excellent structural strength, low water absorption and vapor permeability, as well as high-temperature and low-temperature resistance, providing IP68 protection.

Key Product Features

1. Excellent weatherability and UV resistance, providing up to 5 years of outdoor service life
2. After curing, it forms a transparent protective layer with IP68 waterproof and dustproof rating.
3. Two-component polyurethane, featuring convenient process operation, and High flowability.
4. Complies with ROHS, REACH environmental requirements.
5. Can be heated to accelerate curing, offering efficient curing performance.

Technical Parameters 

Product Applications

1. LED light source: It provides strong adhesion to both plastic and metal casings, with IP68 waterproof rating enabling its use in riverside and coastal environments.
2. LED linear light source: featuring high light transmittance, a wide operating temperature range of-40 to 85°C, and 5-year yellowing resistance. Its salt spray resistance ensures optimal performance in harsh outdoor environments.

Directions for Use

Pre-potting Preparation: Calibrate scales, prepare potting tools, cleaning tools, check machine settings, check vacuum pump force, etc. 

Product Pre-treatment: Place product on a level surface or fixture. Remove dust, clean, degrease, and dry if necessary.

Accurate Proportioning: Manual operation requires precise mixing according to the specified ratio and recording. Machine potting requires calibrated ratios and first-article confirmation is recommended.

Mixing & Stirring: Manual operation requires thorough stirring or using electric stirrers to ensure homogeneous mixing. Machine potting requires sufficient stirring speed, adjust as needed.

Uniform Potting: Manual operation should be done in small, multiple batches to ensure uniformity. Machine potting should follow the programmed path for quantitative dispensing.

Inspection or Secondary Potting: After potting, visually inspect as needed. Perform touch-up, bubble removal, or secondary potting if required.

Curing: Allow the potted and inspected products to cure at room temperature or with heat assistance (recommended 60°C if needed), according to product and process requirements.

Final Product Confirmation: Perform visual inspection and performance testing as required by the customer.

Packing & Shipping & Storage

Hardener: Typically 5KG/ 10KG / 20KG metal or plastic drums.

Resin: Typically 5KG/ 10KG / 20KG metal or plastic drums.

Store and transport as a general chemical product.

Store sealed, protected from light at room temperature. Shelf life varies from 6 to 12 months depending on packaging; please refer to the expiry date on the shipping package.

When temperature drops to 15°C or lower, the hardener or resin should be stored in a warm place or heated before use for potting. Specific heating recommendations depend on the temperature drop; please communicate and consult with us.

FAQ

Q1: Can this potting compound be used for outdoor electronic applications? 

A2: Yes, the weather-resistant properties of this transparent polyurethane potting compound make it suitable for outdoor use, providing protection against UV rays, rain, and temperature fluctuations.

Q2: What are the main features of the Weather-Resistant Transparent Polyurethane Potting Compounds? 

A1: This potting compound offers excellent weather resistance, high transparency, strong adhesion, and durability, making it ideal for protecting electronic components from moisture, dust, and environmental damage.

Q3: What types of electronics are compatible with this potting compound? 

A5: It is compatible with a wide range of electronic components, including circuit boards, sensors, connectors, and LED assemblies, especially those requiring clear encapsulation and protection from harsh environmental conditions.

Q4: Is the compound easy to apply and cure? 

A3: Yes, the potting compound has good flow characteristics for easy application and typically cures at room temperature, forming a tough and flexible protective layer.

Q5: Does the transparent nature of the compound affect its protective qualities? 

A4: No, the transparency of the polyurethane potting compound does not compromise its protective features; it still provides excellent insulation and environmental protection while allowing visual inspection of the encapsulated components.