Black RAL9005 PVC Fence Strip 0.19*35m 450g/㎡

Short Description

1. Factory-direct, with production-controlled tolerances We extrude these strips on our own production line, with thickness and width monitored during production rather than checked only at final inspection. This controlled tolerance keeps the profile consistent at 0.4 mm * 19 cm and is what produces an even, professional-looking barrier across the full fence run.

2. Specifications you can plan around Each roll measures 0.4 mm thick * 19 cm wide * 35 m long, covering approximately 6.65 m² of fence surface per roll. This coverage figure is calculated directly from the roll dimensions (19 cm * 35 m), so you can estimate required roll quantities before ordering.

3. Engineered for privacy and wind protection on chain-link and wire fences The strips are designed specifically for chain-link and wire mesh fencing, forming a continuous barrier that blocks sight lines and reduces wind pass-through along the fence line.

4. Consistent finish over the full installation Because width tolerance is controlled during production, adjacent strips align evenly along the run — avoiding the wavy, uneven appearance typical of loosely-specified strips.

Key Features

• 0.4mm dense thickness – delivers effective visual screening and wind reduction while staying flexible enough for quick weaving and removal.
• 19cm wide strip * 35m roll – fewer strips needed per fence run; one roll covers about 6.65 m² (≈3.7m of a 1.8m-high fence).
• Weather-resistant PVC – formulated for outdoor exposure; UV-stabilized grade available on request 【confirm formulation】.
• Color options: dark grey, light grey, green – match your fence line or landscape; mixed-color orders supported.
• Tool-free installation – strips weave directly into fence mesh; no fasteners or cutting tools required.

Specifications

表格

Material & Construction

The strips are produced from flexible PVC compound with controlled extrusion tolerance, holding the 0.4mm thickness and 19cm width across the full 35m length to avoid thin or uneven sections. For strong-sunlight regions, we recommend confirming the UV-stabilized grade with our team; expected service life can be stated after formulation confirmation

Applications

• Chain link fence privacy screening for gardens and backyards
• Wind and dust reduction on terraces, balconies, and open plots
• Temporary or seasonal screening at construction sites and events
• View blocking along property lines and parking areas

Installation

1. Unroll the strip coil along the fence.
2. Weave each strip horizontally through the fence mesh.
3. Pull strips snug and space them evenly; overlap edges for full coverage.
4. Trim excess length at the end of the run; no tools required.

FAQ

Q: How much fence will one roll cover? A: One roll covers ≈ 6.65 m², equivalent to about 3.7m of fence length at 1.8m height (calculated at full coverage, 0.19m strip width * 35m). We can recalculate for your fence height and mesh spacing.

Q: Can the strips be reused after removal? A: Yes. Pull them back out through the mesh; undamaged strips can be reinstalled in the same or a new location.

Q: Are the strips wind-resistant? A: The 0.4mm flexible PVC follows the fence structure, reducing wind load versus rigid panels. For high-wind sites, confirm the strip grade with our team based on your location.

Q: Do you offer mixed colors in one order? A: Yes, dark grey, light grey, and green can be combined in one shipment; specify quantities per color when ordering.