Dongguan Haida Equipment Co.,LTD
| Packaging Details | ach set protected with resin fiber and PP film, then put into Strong wooden case with operation man |
| Delivery Time | 20 days after order confirmed |
| Payment Terms | L/C,D/A,D/P,T/T,Western Union,MoneyGram,In cash, escrow |
| Supply Ability | 300 Sets per Month Haida |
| power | Electronic |
| Angle | Normal Temp.~200 °c |
| Design standards | 0.1 °c |
| Place of Origin | Guangdong, China (Mainland) |
| Brand Name | HAIDA |
| Certification | ISO 9001:2000; ISO 9001:2008; QS-9000; ISO 14001:2004; CE, , SMC, CMC, CPA, CE,CMA,IMC |
| Model Number | HD-C526-3 |
View Detail Information
Explore similar products
Tensile Rubber Testing Machine , Leather Shoes Scratch Resistance Tester
Stainless Steel Rubber Testing Machine , Vertical Freezing Leather Flexing
Vertical Style Rubber Testing Machine , Freezing Leather Flexing Testing
Safety Rubber Testing Machine , Shoe Heel & Footwear Impact Testing Equipment
Product Specification
| Packaging Details | ach set protected with resin fiber and PP film, then put into Strong wooden case with operation man | Delivery Time | 20 days after order confirmed |
| Payment Terms | L/C,D/A,D/P,T/T,Western Union,MoneyGram,In cash, escrow | Supply Ability | 300 Sets per Month Haida |
| power | Electronic | Angle | Normal Temp.~200 °c |
| Design standards | 0.1 °c | Place of Origin | Guangdong, China (Mainland) |
| Brand Name | HAIDA | Certification | ISO 9001:2000; ISO 9001:2008; QS-9000; ISO 14001:2004; CE, , SMC, CMC, CPA, CE,CMA,IMC |
| Model Number | HD-C526-3 | ||
| High Light | rubber tensile testing machine ，rubber hardness tester | ||
PID Control Rubber Testing Machine , Hot Temperature Adhensive Tape Testing Chamber
Specifications
PID control hot temperature adhensive tape testing chamber
1.Temperature Controller:PID control
2.Safety Device:Overheating or power overload protection
1. Product description
PID control hot temperature adhensive tape testing chamber simulates the adhensive tape in hot temperature environment, and the auto-timer records the holding time of adhensive tape with specific load to confirm the effective time of adhension. The timer shall retain the tseting time automatically to assess the durability of adhensive tape in hot temperature enviroment when the tape falling down from the plate.
2. Specifications:
PID control hot temperature adhensive tape testing chamber | |
Model | HD-C527-1 |
Test Fixture | 10 groups (Timing independently) |
Load | 1 Kg or designated |
Timer | 10 sets, 9999.9 hours |
Temperature Controller | Normal Temp.~200 °c, PID control |
Accuracy | 0.1 °c |
Heating System | Hot Air Circulation |
Safety Device | Overheating or electric power overload protection automatically |
Material | Inside: Stainless Steel; |
Inside Dimension (L×W×H) | 45×50×45 cm |
Outside Dimension (L×W×H) | 97×65×110 cm |
Weight | 105 Kg |
Power | 1phase, AC220V, 15A |
Design Criteria | CNS-11887/11888; PSTC-7; GB/T 4851 |
3. Maintenance of PID control hot temperature adhensive tape testing chamber
3.1, Clean: keep the instrument clean at any time and wipe it by cotton cloth before and after use.
3.2, Anti- rust: spray antirust oil one time on the metal part in the surface of the instrument(wipe it out after spray 2h) .
3.3, Lubrication oil: refuel lubrication oil on the instrument driving components(screw stem) at fixed time(common
lubrication oil is ok).
4. Specimen preparation of Shear Adhesion Tester
After remove 3-5 rounds tape of the outmost lay of a roll of tape sample, unfasten the roll of sample with
300mm/min velocity (uncover isolated layer with same velocity if the specimen is sheet tape). Get the specimenwith width
25mm and length 100mm from central part of the tape in every 200mm distance. Unless otherwise specified, each group has
more than 3 specimens. After unfasten the roll of the sample, it permits less than 3min to put if tensile deformation
is large.
In general, test the specimen at once after get it. Sticky part of the specimen can not be touched by hand and other
things.
5.The picture of the PID control hot temperature adhensive tape testing chamber:
Company Details
Business Type:
Manufacturer
Year Established:
2003
Total Annual:
5000000-7000000
Employee Number:
80~100
Ecer Certification：
Verified Supplier
Haida established in 2004 in Dongguan City, where is the “silicon valley” of world manufacturing industry. It is a certified national high-tech enterprise engaged in design, research and development, production, sales, calibration and after-sale service of test equipment, such as pap... Haida established in 2004 in Dongguan City, where is the “silicon valley” of world manufacturing industry. It is a certified national high-tech enterprise engaged in design, research and development, production, sales, calibration and after-sale service of test equipment, such as pap...
Get in touch with us
Leave a Message, we will call you back quickly!