Xi'an Dehou Electronic Technology Co., Ltd.
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 1000 pcs/ pre month |
| Delivery Time | 7 working days |
| Packaging Details | Carton, 60cm×30cm×30cm |
| Medium | corrosive, clean, dry gas |
| Range | 300-3000SLPM |
| Accuracy | ±1％of full scale |
| Response time | better than 3s |
| Preheating time | ＜15min |
| Calibration conditons | 0℃&101325Pa |
| Operating temperature | 5 to 55℃ |
| Maxmium working pressure | 3 MPaG |
| Brand Name | NUOYINGJIAYE |
| Model Number | NY-M030 |
| Certification | ExdⅡCT6/ExmbⅡCT6 |
| Place of Origin | Xi'an, Shaanxi，China |
View Detail Information
Explore similar products
NY-M030 Series Mass Flow Meter Air Nitrogen Oxygen Flowmeter
Nitrogen Gas Biogas Mass Flow Meter 4 - 20mA
NY - NT V Cone Flowmeter Low Pressure Fluids 32MPa
25MPa Wedge Type Mass Flow Meter NY - XX High Accuracy Measurement
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 1000 pcs/ pre month |
| Delivery Time | 7 working days | Packaging Details | Carton, 60cm×30cm×30cm |
| Medium | corrosive, clean, dry gas | Range | 300-3000SLPM |
| Accuracy | ±1％of full scale | Response time | better than 3s |
| Preheating time | ＜15min | Calibration conditons | 0℃&101325Pa |
| Operating temperature | 5 to 55℃ | Maxmium working pressure | 3 MPaG |
| Brand Name | NUOYINGJIAYE | Model Number | NY-M030 |
| Certification | ExdⅡCT6/ExmbⅡCT6 | Place of Origin | Xi'an, Shaanxi，China |
| High Light | 300 SLPM Digital Gas Mass Flow Meter ，Mass Flow Meter NY-M030 | ||
NY-M030 Series Digital Mass Flow Controller ±1％of full scale corrosive, clean, dry gas
Description
NY-M030 series digital display large flow gas mass flow
controller i s composed of mass flow sensor , thermal element ,
mass flow controller regulating valve and amplifier circuit . It uses
the flow of fluid to transfer heat to change the heat conduction
distribution effect of measuring capillary temperature distribution .
The principle i s to use the principle of temperature difference
calorimetry before and after capillary heat transfer to measure the
mass flow of the gas , amplify the flow signal measured by the
sensor , and then compare it with the set voltage , and use the
obtained difference to drive . Control the regulating valve , and the
closed-loop control of the flow through the channel to make it
equal to the set flow .
Features
● Using the thermal principle, the mass flow of gas is not affected by changes in ambient temperature and pressure.
● Tubular shunt principle, easy to change the range and easy to install.
● Good sensor package reduces the sensitivity of external temperature changes.
● The measurement and control range is large, the maximum full scale can reach 3000ln/min
● Short warm-up time, small zero drift, high measurement and control accuracy, suitable for measurement and control of micro flow.
● It can communicate with the instrument through the secondary instrument or PLC, and the operation is simple.
● High precision: better than 1%
● Wide measurable range: 2 ~ 100%
● Fast response time, better than 3s
● Can be used for a variety of gases
● Can provide editing mixed gas calibration
Industry Application
● Universities / Research Institutes ● Automobile Manufacturing
● Environmental Monitoring ● Photovoltaics
● Vacuum Industry and Coating ● Fuel Cells
● Industrial Furnaces ● Metrology Calibration
● Semiconductors
● Process Gas Measurement
Accuracy Upgrade
Range : 300 - 3000SLPM
Among them : 300-3000 SLPM range, the following indicators are upgraded:
Mass Flow Ordinary Accuracy : ± 1% of full scale (maximum value)
Mass Flow Accuracy : ± 1% of full scale (maximum value)
Repeatability : ±(0.1% of reading + 0.02% of full scale)
Mass Flow Zero Drift: ± 0.2% of full scale
Mass Flow Span Drift: ± 0.3% of full scale
Performance
Medium requirements: corrosive, clean, dry gas
Type of medium: more than 80 kinds of gases, please refer to the back
Range from: 300 - 3000 SLPM (please inquire for details)
Measurement and control range 2~100%
Display mode: Display mass flow
Accuracy: ±1% of full scale
Repeatability: ± 0.2 % of full scale
Zero drift & full scale drift 0.05 % full scale / ℃ / Atm
Response time: better than 3s
Preheating time: < 15min
Calibration conditions: 0 ℃ &101325Pa (other standard conditions optional)
Operating temperature: 5 to 55 °C (optional high temperature option to -20 to 80 °C)
Operating humidity: 0 ~ 95 %, non-condensing
Maximum working pressure: 3 MPaG
Minimum operating pressure: If no special vacuum calibration is required, it is recommended to use the absolute pressure above 400 KPaA; other vacuum pressures are recommended to be specially calibrated Full-scale pressure loss: refer to the detailed pressure loss table on the back Digital input/output signal: RS485RS232MODBUS protocol Analog input/output signal: 0-5 VDC, 4-20 mA analog signal
Accuracy: Add ±0. 1% full scale error to base error
Supply Voltage: 12 - 30 VDC (15 - 30 VDC for 4-20 mA output)
Supply current: 250 mA, 1 A, 2 A (consult for details)
Electrical interface: DB9
Leak rate (external leakage): Leak rate can be as low as 1 x 10-9Atm cc/s He
Material: SS316 Stainless Steel Process Connection: Standard G1/2 Female Thread
Installation method: no requirement for location
Protection class: IP40
Size/Pressure Loss
| Full Scale Mass Flow Controller | Full scale pressure loss (psid) exhaust to atmosphere | Physical dimension | Connection interface 2 |
| 2sccm - 50 sccm | 1.0 | 118MM H ×79MM W ×29MM D |
G1/4 Thread(F) Optional: 3mm 6mm 8mm 10mm 1/8” 1/4” 3/8” ½ ” Swagelok Standard Card Sleeves |
| 100 sccm - 500 sccm | 1.0 | 118MM H ×79MM W ×29MM D | |
| 1 slpm | 1.5 | 118MM H ×79MM W ×29MM D | |
| 2 slpm | 3.0 | 118MM H ×79MM W ×29MM D | |
| 5 slpm | 2.0 | 118MM H ×79MM W ×29MM D | |
| 10 slpm | 5.5 | 118MM H ×79MM W ×29MM D | |
| 30 slpm | 20.0 | 118MM H ×79MM W ×29MM D | |
| 50 slpm | 2.0 | 130MM H × 115MM W ×35MM D | 3/8''GThread(F) Optional: 3/8” 1/2” 3/4” 1” Swagelok Standard Card Sleeves |
| 100 slpm | 3.2 | 130MM H × 115MM W ×35MM D | |
| 250 slpm | 2.4 | 130MM H × 115MM W ×35MM D | |
| 300 slpm | 6.5 | 130MM H × 115MM W ×35MM D | |
| 1000 slpm | 14.0 | 1/2''GThread(F) Optional: 3/8” 1/2” 3/4” 1” Swagelok Standard Card Sleeves | |
| 1500 slpm | 17.0 | ||
| 2000 slpm | 28.6 | ||
| 3000 slpm | 28.6 | ||
| 1,Another low pressure loss series mass flow controller. 2,Compatible with Beswick, Swagelok, Parker, surface seal, quick-connect fittings and ferrule adapters, and also compatible with VCR, SAE fittings according to user requirements. 3,Buna-N surface seal to 1/8''NPT internal thread. | |||
FAQ
Q:How long will you reply me?
A:We will contact you as soon as possible but within 12 hours
Q: Can I get some samples?
A: Yes, Sample order is available for quality check and market test. But you have to pay the express cost.
Q: How soon can you arrange your production?
A: Once getting your product confirmation and receiving the prepayment, the production will be started immediately.
Q: What's delivery time?
A: It usually takes about 3-5 working days for small order and 10-15 days for big order.
Q:How do you control your quality ?
A: Three inspection steps(of original, production, and finished goods) + good warranty service(1 year free to change a new one without any human damage factors).
Q: What certificates do you have ?
A:ISO9000, CE, Explosion-proof certification, RoHs ready. And before the delievry of goods, quality and safety inspection certification issued by third parts also can be offered.
Q:Could I visit your factory?
A:Very welcome! Fly to Xian Yang air port. It was a big pleasure for us.
Q: What's your warranty terms?
A: We offer 12 months warranty time.
Q:can you provide OEM & Customized service?
A:Yes, OEM and ODM are both available, we have the professional R&D dept which can provide professional solutions for you.
If you have any other further questions, please contact us. We will process your requests as soon as possible.
Serena Jiang / Sales Manager
Phone/WhatsApp:+86 15934851597
Company Details
Business Type:
Manufacturer
Year Established:
2015
Total Annual:
1500000-180000
Employee Number:
60~80
Ecer Certification：
Verified Supplier
Company Introduction Xi'an Dehou Electronic Technology Co., Ltd. is a high-tech enterprise specializing in research and development, production, sales of industrial automation instruments and providing Internet of Things solutions. At present, the company has ... Company Introduction Xi'an Dehou Electronic Technology Co., Ltd. is a high-tech enterprise specializing in research and development, production, sales of industrial automation instruments and providing Internet of Things solutions. At present, the company has ...
Get in touch with us
Leave a Message, we will call you back quickly!