Absolute Pressure Transducer for Industrial Automation and HVAC

1. Why You Need It

Absolute pressure measurement is essential whenever the process must be referenced to a stable vacuum, not the shifting local atmosphere. In HVAC systems, hydraulic circuits and industrial automation, atmospheric changes would otherwise corrupt a gauge reading. This absolute pressure transducer measures true absolute pressure and communicates it over HART, Modbus or Profibus, giving engineers a stable, multi-protocol pressure signal that integrates with modern control systems and stays accurate regardless of weather or altitude.

2. Working Principle

The transducer uses a sensing element with a sealed vacuum reference. Process pressure acts on one side of the diaphragm while the reference side is permanently evacuated, so the deflection is proportional to absolute pressure. The sensor converts this deflection into a 4-20 mA signal, and the onboard electronics add HART, Modbus or Profibus digital communication. Because the reference vacuum is sealed and stable, the measurement does not drift with ambient pressure changes.

3. Key Advantages

• True absolute pressure measurement
• HART, Modbus and Profibus protocols
• Gauge / absolute / sealed gauge
• 4-20 mA 2-wire output
• 24 V DC power supply
• 1/4 inch NPT process connection
• M12 electrical connection
• CL150 (DN25) option
• Suitable for gas and liquid media
• Stable, drift-free reference

Common Pain Points & Solutions

Application Cases

Technical Specifications

FAQ

Q: What is an absolute pressure transducer?

An absolute pressure transducer measures pressure relative to a sealed internal vacuum, so its reading is true absolute pressure. Unlike gauge sensors that reference the surrounding atmosphere, an absolute transducer's zero point never shifts with weather or altitude. This makes it essential for HVAC, hydraulic and automation applications where a stable, atmosphere-independent pressure reading is required.

Q: What protocols does it support?

The transducer supports HART, Modbus and Profibus digital communication in addition to the 4-20 mA analog signal. This multi-protocol support lets the same instrument connect to a wide range of PLC, DCS and SCADA systems, simplifying integration and reducing the number of variants that need to be stocked.

Q: What pressure types are available?

It offers gauge, absolute and sealed gauge pressure types. Gauge references atmosphere, absolute references a sealed vacuum, and sealed gauge uses a fixed internal reference. The choice depends on whether the application needs a true absolute reading or a simpler gauge reference.

Q: What is the output signal?

The output is a standard 4-20 mA two-wire signal, which connects directly to PLC, DCS and SCADA inputs. The two-wire loop simplifies wiring and allows long cable runs without signal degradation, while the digital protocol overlays on the same loop for configuration and diagnostics.

Q: What power supply does it need?

It operates on a 24 V DC supply, the standard for industrial instrumentation. The low-voltage DC supply is safe and integrates with standard control panels and power supplies used in automation and HVAC systems.

Q: What process connection does it use?

The standard process connection is 1/4 inch NPT, with a CL150 (DN25) flanged option available. The threaded connection suits most HVAC, hydraulic and process lines, while the flange option is used where a larger, more secure connection to the vessel or pipe is required.

Q: What media can it measure?

It measures gas and liquid media compatible with the wetted materials. Typical media include air, refrigerant, water, hydraulic oil and process gases. For aggressive media, the wetted material compatibility should be verified before selection.

Q: How does it differ from a gauge pressure transducer?

A gauge pressure transducer measures relative to ambient atmosphere, so its zero shifts with weather and altitude. An absolute pressure transducer measures relative to a sealed vacuum, so its zero is fixed. For applications where a true, stable pressure reference is needed, the absolute transducer is required.

Q: Why is a stable reference important?

A stable reference ensures the pressure reading reflects only the process, not environmental changes. In HVAC control, hydraulic systems and automation, a drifting zero causes control errors and inefficiency. The sealed vacuum reference eliminates this source of error, providing consistent, repeatable measurement.

Q: Where is it used?

It is used in HVAC systems, hydraulic circuits, industrial automation, water treatment and any application needing a stable absolute pressure measurement with multi-protocol communication. Its combination of true absolute sensing and HART/Modbus/Profibus support makes it a versatile choice for modern plants.