| Coverage | 10-12 sq. ft. |
| Fade Resistance | Yes |
| Glossy | High |
| UV Resistance | Yes |
| Heat Resistance | Yes |
| Chemical Composition | Acrylic |
| Water Resistance | Yes |
| Number of Coats | 2-3 |
| Scrub Resistance | Yes |
| Manufacture Service | OEM/ODM/Technology support |
| Sheen | High Gloss |
| Drying Time | At 25 ºC, after 15 minutes, spray varnish within 1 hour. |
| Payment Terms | T/T |
| Supply Ability | 1000 Boxes/day |
| Delivery Time | 7-15 Working Days |
| Packaging Details | Can/Carton |
| Brand Name | Meklon |
| Model Number | P-305 |
| Certification | ISO,MSDS,SGS |
| Place of Origin | China |
View Detail Information
Explore similar products
Scratch Resistant Car Pearl Paint Durable Mildewproof Red Color
Anti Oxidation Car Pearl Paint Oilproof Multipurpose Crystal White
MSDS Metallic Car Pearl Paint White Practical Mildew Resistant
SGS Harmless Pearl White Automotive Paint , Glossy Pearl White Spray Paint For
Product Specification
| Coverage | 10-12 sq. ft. | Fade Resistance | Yes |
| Glossy | High | UV Resistance | Yes |
| Heat Resistance | Yes | Chemical Composition | Acrylic |
| Water Resistance | Yes | Number of Coats | 2-3 |
| Scrub Resistance | Yes | Manufacture Service | OEM/ODM/Technology support |
| Sheen | High Gloss | Drying Time | At 25 ºC, after 15 minutes, spray varnish within 1 hour. |
| Payment Terms | T/T | Supply Ability | 1000 Boxes/day |
| Delivery Time | 7-15 Working Days | Packaging Details | Can/Carton |
| Brand Name | Meklon | Model Number | P-305 |
| Certification | ISO,MSDS,SGS | Place of Origin | China |
| High Light | weatherproof car pearl paint ,copper pearl car paint ,uv resistant pearl paint | ||
Pearl car paint is a unique and high-end car paint color, with copper color on the front, golden yellow on the side, medium grain, opaque and good hiding power.
| Pot Life | 24 Hours,25ºC | ||
| Spray Gun Set Up | Gravity feed: 1.2~1.5mm | ||
| Suction feed: 1.2~1.7mm The pressure of spray gun is 3-5 kg/cm² | |||
| Spray-Painted Method | Thin spray 2 ~3 layers with a air pressure of 3.5 kg, the volatilization time is 2 ~ 3 minutes(25ºC), spraying distance is 15~20cm. After covered completely, spray the last layer with 2 kg air pressure. After volatilize for 5 ~ 10 minutes but not more than 1 hour, spray varnish. | ||
| Film Thickness | 10~20 micron | ||
| Range of Application | The surface of old paint or primer after polishing with the sandpaper or removing the oil. | ||
| Others | After spraying 1K metal paint,should spray varnish within 1 hour as much as possible,to ensure the accuracy and repeatability of color formula, stir equably before application. | ||
Meklon professional automotive refinish paint - factory direct supply with OEM/ODM support, ISO 9001 & ISO 14001 certified.
Q: What spray settings and film build does P-305 copper pearl need?
A: Use a gravity gun with a 1.2-1.5 mm nozzle or a suction gun at 1.2-1.7 mm, and set pressure at 3-5 kg/cm2. Apply two to three thin mist coats at about 3.5 kg with 2-3 minutes flash-off at 25C and a 15-20 cm gun distance, then lay the final coat at 2 kg once hiding is complete; let it flash 5-10 minutes and apply clear coat within one hour. Target film thickness is 10-20 microns over sanded, degreased old paint or primer, and pot life is 24 hours at 25C so mix only what a job needs.
Q: How does the copper pearl behave under different viewing angles?
A: This is an interference pearl: the panel reads copper from the front and shifts towards golden yellow from the side. That angle-dependent shift is the whole point of the shade, which is why the orientation of the pearl layer matters more than film thickness. Keep gun distance and overlap constant across adjacent panels, spray doors, bonnets and bumpers from the same batch, and always judge the match after clear coat rather than on the wet basecoat, because clear coat deepens and locks the effect.
Q: Is the coating safe to use in a workshop without special ventilation?
A: The product is formulated as a nontoxic, low-odour 1K system, which reduces solvent load and operator discomfort compared with older high-solvent metallics. Standard refinish practice still applies: use a spray booth or good cross-draught ventilation, wear a cartridge respirator and gloves, and keep cans sealed when not in use. Because the material is single component, there is no hardener pot to dispose of, which simplifies waste handling and lets you mix small quantities for spot repairs without waste.
Q: Can you match a specific copper OEM code and what is the minimum order?
A: Yes. Send the OEM code, a clean fuel-filler flap or a sprayed panel sample and our colour lab will build the formula, then issue a sprayed test card for your approval before bulk production; repeat orders stay within colour difference 1.5. Typical first orders are mixed pallets covering several shades rather than one colour, so your customers can test the system in their market. Share your colour list, pack size and annual volume and we will confirm MOQ, tiered pricing and lead time.
Meklon Premium Automotive Refinish Paint Manufacturer
ISO 9001 & ISO 14001 Certified
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2015
Total Annual:
1000000-2000000
Employee Number:
100~300
Ecer Certification:
Verified Supplier
Factory Introduction Guangzhou Meklon Chemical Technology Co., Ltd is an automotive paint manufacturing factory with 15+ years of rich experience, focusing on providing high-quality automotive paint products to customers around the world. As a professional automotive paint manufacturer, we have a ... Factory Introduction Guangzhou Meklon Chemical Technology Co., Ltd is an automotive paint manufacturing factory with 15+ years of rich experience, focusing on providing high-quality automotive paint products to customers around the world. As a professional automotive paint manufacturer, we have a ...
Get in touch with us
Leave a Message, we will call you back quickly!