SG3500 THERMO KING diesel engine marine generator container refrigeration unit

SG3500 THERMO KING diesel engine marine generator container refrigeration unit electric power supply remarkable fuel efficiency made in China factory

SG-3500 POWER YOU CAN DEPEND ON Thermo King generator sets perform a critical role in international refrigerated transport. Built to be reliable, sturdy, and cost-effective to run, these are technologies that power refrigerated containers – and ensure temperature-sensitive cargoes always arrive in an ideal condition. The SG-3500 occupies a critical position within our market-leading product range. Developed for marine reefers, the unit has been designed with reliability, sustainability, and user experience front of mind.

THERMO KING CORPORATION

1. The generator set is designed for mounting to the upper front structure of an ISO container.
2. The design incorporates a quick connection to the upper container corner castings and/ or steel pin-mounting clamps for mounting to container top.
3. Additional attaching points on the container vertical structural members provide a secure mounting arrangement.
4. These lower mounting bolts are retained by a steel plate, stainless steel hinge, and positive ¼ turn latch.
5. A bolt storage tube is welded to the frame to secure the bolt between trips.
6. The rotor washer clip to prevent spinning off during normal use positively retains the lower mounting bolt/plate washer assembly. Provision tube for mounting bolt when not in use.
7. The Genset envelope considered the need to access the refrigeration unit control box while mounted on all common refrigeration units from Thermo King, Carrier, StarCool, Daikin, Klinge for either standard or high cube containers
8. Genset components (filters, hoses, wire harness, etc.) are installed and securely fastened to ensure dependable, long-term operation and ease of serviceability.
9. All wires, hoses, tubes etc. are fastened properly to protect integrity and prevent wire chafing.
10. Ring terminals or crimps / set screws are used on all high voltage connections.

1. The Genset is designed to withstand & operate satisfactorily in over-the road trucking, and railway operations.
2. The Genset is rated to withstand all shock and vibrations experienced over the life of the Genset.

1. Structural steel frame is cleaned through a 3-stage solvent pretreatment and a 4-stage chemical pretreatment with a multi-metal iron phosphate passivation, and coated with black polyester TGIC powder (2.5 – 4.0) mils.
2. All steel is commercial quality hot or cold rolled.

Salt Spray test

After 1000 hours exposure: using test methods: ASTM B-117 ; ASTM D- 1654 (Proc A, Method 2) ; ASTM D-1735, 7.9 & 7.9.1 (Water Borne); ASTM D-714/ASTM D-610

• Maximum of 3/32" creep total from scribe
• No blisters, and No rust

1. Panels and doors are chemically cleaned through a 3-stage solvent pretreatment and a 4-stage chemical pretreatment with a multi-metal iron phosphate passivation and coated with black polyester TGIC powder (2.5 – 4.0) mils.
2. Door material: aluminum, 0.100" (2.5mm) thick.
3. Panel material: aluminum, 0.063" (1.60 mm) thick.

1. All hardware (screws, washers, nuts & clamps) are stainless steel for maximum protection from salt-water corrosion.
2. This excludes hardware supplied by original equipment manufacturer suppliers.

English and Spanish language operating instructions.

70 dBA. 3-point average at 1m 45 degrees from the exhaust

• Product consulting
• Quotation
• programme design
• Samples available

• Installation assistance
• Technical guidance
• Provide accessories

To be the most professional global refrigerated transport expert and the supplier of refrigeration units and parts.

In the field of refrigerated transport facilities, we can provide clients with product and service of high quality;In the field of vehicles, our global customers can get the best quality of vehicles products made in China.

We hold the distributorship authorized by some famous international brand: including the refrigeration unit of THERMO KING , the new energy electric golf buggy and sightseeing car of CLUB CAR under Company Ingersoll Rand; we are the distributor of CIMC, the global container leading manufacturer, therefore we can propose the product and technical resolve project of reefer container, refrigerated trailer and truck of CIMC; we can supply customer with commercial vehicles in CBU/CKD and its spare parts of good quality.We hold a group of excellent and experienced engineers to make the best customized project upon your request.

YANGTZE MOTORS INDUSTRY CO., LIMITED. is a leading transportation temperature control technology products supplier in China, We provide Thermo King and Carrier truck refrigeration units and parts which are famous international brands all over the world. Our main sales markets are Asia, South America, the Middle East,, and Africa. we are ready to find the right transportation temperature control solution for your needs, please contact us, thank you!

Before all finished products are sent out .we will aslo carry out the standard fastness test .After all the tests are qualified ,We will deliver the goods to the Port or location designated by the customer.

Sales manager : Samking Liu
E-mail : chris@cqchui.com
WhatsApp/WeChat : +86 17880280241
Website : www.refrigeration-unit.com

IF you want to get more information , please contact us without hesitation !