Briture Co., Ltd.
| Payment Terms | L/C, T/T, D/P |
| Supply Ability | 2000MT/year |
| Delivery Time | The delivery time of pp fiber mesh is around 2weeks |
| Packaging Details | 0.9kg or 1kg net each PE bag or paper bag |
| Raw Material | 100% virgin polypropylene |
| Fiber type | Fibrillated Mesh |
| Crack Elongation (%) | 10 min |
| Melting Point (℃) | 160 |
| Density | 0.91 |
| Tensile Strength (Mpa) | 560 min |
| Fiber Diameter (mm) | 0.035 |
| Fiber length (mm) | 12,19,38,54... |
| Elastic Modulas (Mpa) | 3500 min. |
| Width (mm) | 5 |
| Alkali & Acid resistance | Strong |
| Water-Absorbency | No |
| Brand Name | Briture |
| Model Number | PP Fiber Mesh Form |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
Concrete Reinforced Polypropylene Fibre Macrofibers 54mm For Construction Mining
6mm Monofilament Reinforced Concrete Polypropylene PP Fiber For Construction
PP Staple Macro Fiber For Concrete Fibers Instead Of Steel Fiber
48mm Embossed Macro Polypropylene Synthetic Fiber PP Fiber For Shotcrete
Product Specification
| Payment Terms | L/C, T/T, D/P | Supply Ability | 2000MT/year |
| Delivery Time | The delivery time of pp fiber mesh is around 2weeks | Packaging Details | 0.9kg or 1kg net each PE bag or paper bag |
| Raw Material | 100% virgin polypropylene | Fiber type | Fibrillated Mesh |
| Crack Elongation (%) | 10 min | Melting Point (℃) | 160 |
| Density | 0.91 | Tensile Strength (Mpa) | 560 min |
| Fiber Diameter (mm) | 0.035 | Fiber length (mm) | 12,19,38,54... |
| Elastic Modulas (Mpa) | 3500 min. | Width (mm) | 5 |
| Alkali & Acid resistance | Strong | Water-Absorbency | No |
| Brand Name | Briture | Model Number | PP Fiber Mesh Form |
| Certification | CE | Place of Origin | China |
| High Light | PP Fiber Mesh Form ，Alkali Resistant PP Fiber ，Concrete PP Fiber Mesh Form | ||
Strong Acid And Alkali Resistance PP Fiber Mesh Form For Concrete Anti-Crack
PP Fiber Mesh Introduction:
Briture PP Fiber Fibrillated Mesh form is made of 100% virgin homopolymer polypropylene with form of mesh, it is mainly used for concrete and mortar reinforcement, anti-cracking.
PP Fiber Mesh Function:
| Increase seepage resistance | Prolong endurance | Improve steel protection |
| Increase cracking resistance | Increase fire resistance | Strengthen spurt & fatigue |
| Improve tensile, bending & folding strength | Improve plastic deformity | Strong acid & alkali resistance and good endurance |
PP Fiber Mesh Applying Instruction:
1. Length : Generally, the proper length of the fiber added into concrete is 20 mm, and in the spray concrete is 10mm.
2. Ratio Design: Usually the proper amount of fiber to concrete is 0.9kg/m3 , and the water-proof layer of the bridge requires 1.35-1.8kg/m3, and the spray concrete in the tunnel is also the same and other materials remain the same. The ratio of fiber and concrete can be determined by tests for special purposes. The fiber has better effects on the concrete with active compound materials, such as silicon ash, coal powder, ground slag and zeolite powder.
3. Mixer Adoption: Double-axle horizontal compelling mixer is better and self-dropping cylinder mixer can be used, too.
4. Mixing Process: Crushed stones, fibers and sands are put into the mixer in succession. After stirring for two minutes, fiber will fully spread and then add cement and water and stir normally. The addition of materials also can be put into as usual, but the stirring time should be properly prolonged to make fiber completely mixed.
5. Stirring Time: The purpose of the stirring is to make fiber fully spread into monofilament or the net fully spread, so generally the stirring time is 2-3minutes after the addition of polypropylene fiber-mesh.
PP Fiber Mesh Specifications:
| Raw Material | 100% virgin polypropylene | Fiber type | Fibrillated Mesh |
| Crack Elongation (%) | 10 min. | Melting Point (℃) | 160 |
| Density | 0.91 | Tensile Strength (Mpa) | 560 min. |
| Fiber Diameter (mm) | 0.035 | Fiber length (mm) | 12,19,38,54... |
| Elastic Modulas (Mpa) | 3500 min. | Width (mm) | 5 |
| Alkali & Acid resistance | Strong | Water-Absorbency | No. |
PP Fiber Mesh Packing:
0.9kg or 1kg net each PE bag or paper bag
Certification:
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
2011
Total Annual:
2,000,0000.00-5,000,000.00
Employee Number:
5~20
Ecer Certification：
Site Member
Briture Co., Ltd. was founded in year of 2011 by Mr. Wang Yao in Anhui, China. who has rich experience of 20years to supply chemical materials, especially in the field of printing ink and paint industry. In the same year, we cooperated with Alibaba for developing export... Briture Co., Ltd. was founded in year of 2011 by Mr. Wang Yao in Anhui, China. who has rich experience of 20years to supply chemical materials, especially in the field of printing ink and paint industry. In the same year, we cooperated with Alibaba for developing export...
Get in touch with us
Leave a Message, we will call you back quickly!