Shenzhen Samtion Chemical Co., Ltd
| Payment Terms | L/C, T/T, Western Union, MoneyGram |
| Supply Ability | To be negotiated |
| Delivery Time | To be negotiated |
| Packaging Details | 25KG/bag |
| Melt Volume Rate, MVR at 260°C/2.16 kg | ？？？ |
| UL Recognized, 94HB Flame Class Rating (3) | ？？？ |
| Brand Name | S-Plastic Thermocomp |
| Model Number | FF006 |
| Certification | Datasheet，MSDS，ROHS，SGS，REACH，FDA，EU，UL，COC/COA ,please contact us |
| Place of Origin | —— |
View Detail Information
Explore similar products
S-Plastic Thermocomp QF006 is a compound based on Nylon 6/10 resin containing
S-Plastic Thermocomp DX04021 is a compound based on Polycarbonate resin
S-Plastic Thermocomp UF006AS resin compound based on Polyphthalamide resin
S-Plastic Thermocomp RF009H is a compound based on Nylon 66 resin containing
Product Specification
| Payment Terms | L/C, T/T, Western Union, MoneyGram | Supply Ability | To be negotiated |
| Delivery Time | To be negotiated | Packaging Details | 25KG/bag |
| Melt Volume Rate, MVR at 260°C/2.16 kg | ？？？ | UL Recognized, 94HB Flame Class Rating (3) | ？？？ |
| Brand Name | S-Plastic Thermocomp | Model Number | FF006 |
| Certification | Datasheet，MSDS，ROHS，SGS，REACH，FDA，EU，UL，COC/COA ,please contact us | Place of Origin | —— |
S-Plastics Thermocomp FF006 resin is FF-1006 is a glass filled Polyethylene.
| MECHANICAL | Value | Unit | Standard |
| Tensile Stress, yld, Type I, 5 mm/min | 44 | MPa | ASTM D 638 |
| Tensile Stress, brk, Type I, 5 mm/min | 44 | MPa | ASTM D 638 |
| Tensile Strain, yld, Type I, 5 mm/min | 1.5 | % | ASTM D 638 |
| Tensile Strain, brk, Type I, 5 mm/min | 1.5 | % | ASTM D 638 |
| Tensile Modulus, 50 mm/min | 6660 | MPa | ASTM D 638 |
| Flexural Stress, yld, 1.3 mm/min, 50 mm span | 62 | MPa | ASTM D 790 |
| Flexural Stress, brk, 1.3 mm/min, 50 mm span | 47 | MPa | ASTM D 790 |
| Flexural Modulus, 1.3 mm/min, 50 mm span | 4210 | MPa | ASTM D 790 |
| Tensile Stress, yield, 5 mm/min | 44 | MPa | ISO 527 |
| Tensile Stress, break, 5 mm/min | 44 | MPa | ISO 527 |
| Tensile Strain, yield, 5 mm/min | 1.4 | % | ISO 527 |
| Tensile Strain, break, 5 mm/min | 1.4 | % | ISO 527 |
| Tensile Modulus, 1 mm/min | 4580 | MPa | ISO 527 |
| Flexural Stress, yield, 2 mm/min | 64 | MPa | ISO 178 |
| Flexural Strain, break, 2 mm/min | 2.1 | % | ISO 178 |
| Flexural Modulus, 2 mm/min | 4940 | MPa | ISO 178 |
| IMPACT | Value | Unit | Standard |
| Izod Impact, unnotched, 23°C | 175 | J/m | ASTM D 4812 |
| Izod Impact, notched, 23°C | 55 | J/m | ASTM D 256 |
| Izod Impact, unnotched 80*10*4 +23°C | 12 | kJ/m² | ISO 180/1U |
| Izod Impact, notched 80*10*4 +23°C | 4 | kJ/m² | ISO 180/1A |
| THERMAL | Value | Unit | Standard |
| HDT, 0.45 MPa, 3.2 mm, unannealed | 130 | °C | ASTM D 648 |
| HDT, 1.82 MPa, 3.2mm, unannealed | 115 | °C | ASTM D 648 |
| CTE, -40°C to 40°C, flow | 3.22E+00 | 1/°C | ASTM E 831 |
| CTE, -40°C to 40°C, xflow | 1.25E+01 | 1/°C | ASTM E 831 |
| CTE, 23°C to 60°C, flow | 3.22E+00 | 1/°C | ISO 11359-2 |
| CTE, 23°C to 60°C, xflow | 1.25E+01 | 1/°C | ISO 11359-2 |
| HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 129 | °C | ISO 75/Bf |
| HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 111 | °C | ISO 75/Af |
| PHYSICAL | Value | Unit | Standard |
| Density | 1.18 | g/cm³ | ASTM D 792 |
| Moisture Absorption, 50% RH, 24 hrs | 0.02 | % | ASTM D 570 |
| Mold Shrinkage, flow, 24 hrs | 0.4 - 0.7 | % | ASTM D 955 |
| Mold Shrinkage, xflow, 24 hrs | 1 - 3 | % | ASTM D 955 |
| Density | 1.18 | g/cm³ | ISO 1183 |
| Moisture Absorption (23°C / 50% RH) | 0.03 | % | ISO 62 |
| Source GMD, last updated:03/26/2008 | |||
| THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES. |
| PLEASE CHECK WITH YOUR (LOCAL SALES OFFICE) FOR AVAILABILITY IN YOUR REGION |
| (1) Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours storage at 23°C/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded samples. All samples tested under ISO test standards are prepared according to ISO 294. |
| (2) Only typical data for selection purposes. Not to be used for part or tool design. |
| (3) This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions. |
| (4) Internal measurements according to UL standards. |
Other related products we recommend:
| For more information please download the datasheet | |
| S-Plastics Thermocomp FF006.pdf |
| Get The Latest Quotation
First-level distribution source in South China Reduce procurement costs, improve supply stability, Help you find the most suitable engineering plastic materials
|
Company Details
Business Type:
Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company
Year Established:
2019
Total Annual:
30000000-50000000
Employee Number:
20~60
Ecer Certification：
Site Member
The company Shenzhen Samtion Chemical Co., Ltd. is located in Longhua District, Shenzhen, China, close to the transportation hub of Shenzhen North Railway Station. The company is formed by a group of senior teams engaged in the sales and production of engineering plastic materials for a long time... The company Shenzhen Samtion Chemical Co., Ltd. is located in Longhua District, Shenzhen, China, close to the transportation hub of Shenzhen North Railway Station. The company is formed by a group of senior teams engaged in the sales and production of engineering plastic materials for a long time...
Get in touch with us
Leave a Message, we will call you back quickly!