1.82 Ohm 1 Tolerance Resistor 1206 1 Watt Metal Film Resistor

Product Specification

Comprehensive Introduction to the 1206 1.82Ω 1W 1% EAM16FT1R82DES Anti-Sulfurated Resistor

In the intricate world of modern electronics, where reliability and longevity are paramount, the choice of passive components can define the success or failure of an entire system. Among these, the 1206 1.82Ω (1.82 Ohm) 1W 1% EAM16FT1R82DES resistor stands out as a premium component engineered for demanding applications. This metal film resistor is not just a simple current-limiting device; it is a sophisticated solution designed to combat harsh environmental challenges, particularly sulfur contamination, while delivering stable and precise performance. This article provides a detailed overview of its features, technical specifications, and the critical applications it serves.

Product Overview and Key Features

The 1206 1.82Ω 1W 1% resistor is identified by the part number EAM16FT1R82DES, which encapsulates its core electrical characteristics. The "1206" designation refers to its standard chip size (3.2mm x 1.6mm), making it compatible with automated surface-mount technology (SMT) assembly lines. Its primary electrical parameters are a resistance of 1.82 Ohm, a power rating of 1 Watt, and a tight tolerance of ±1%.

What truly distinguishes this component is its specialized construction as an Anti-Sulfurated Resistor. Sulfur, present in atmospheric pollution, certain rubbers, seals, and industrial gases, can infiltrate electronic assemblies and react with the silver terminations of standard resistors. This reaction forms non-conductive silver sulfide (Ag₂S), leading to an increase in resistance, eventual open circuits, and catastrophic device failure. The 1206 1.82Ω 1W 1% EAM16FT1R82DES is specifically engineered to resist this degradation. Its terminations are treated with a special protective material or utilize sulfur-resistant metals, creating a robust barrier against corrosive agents and ensuring long-term electrical stability even in sulfur-rich environments.

Furthermore, this resistor is constructed using a metal film deposited on a high-grade ceramic substrate. This technology is renowned for providing excellent stability, low noise, and a low temperature coefficient of resistance (TCR). An additional, often critical, feature is its low inductance design. The spiral pattern used to trim the resistance value in metal film resistors can inherently create a small inductor. For the 1206 1.82Ω 1W 1% model, the design is optimized to minimize this parasitic inductance, making it highly suitable for high-frequency applications, switching power supplies, and pulse-load circuits where inductive reactance can distort signals and impair performance.

Detailed Technical Specifications

   Resistance Value: 1.82Ω (1.82 Ohm). This specific, low-ohm value makes it ideal for tasks like current sensing, inrush current limiting, and precision damping.

   Power Rating: 1 Watt. This is a substantial power handling capability for a 1206 package, allowing it to dissipate significant heat under load.

   Tolerance: 1%. This precision ensures that the actual resistance value is consistently within a very close range of the stated 1.82Ω, which is crucial for the accuracy and predictability of the circuit.

   Technology: Metal Film. This guarantees superior performance over carbon film counterparts, including better stability, lower noise, and more precise resistance values.

   Key Feature: Enhanced Anti-Sulfuration. It offers exceptional resistance to sulfur-induced corrosion, dramatically improving the Mean Time Between Failures (MTBF) in challenging conditions.

   Secondary Feature: Low Inductance. Its construction minimizes parasitic inductance for reliable high-frequency operation.

   Environmental Compliance: The product fully conforms to RoHS (Restriction of Hazardous Substances), REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals), and is Lead-Free (Pb-Free). This makes it an environmentally responsible choice that meets stringent international regulatory standards.

Critical Applications and Use Cases

The unique combination of a low resistance value, high power rating, precision tolerance, and environmental robustness makes the 1206 1.82Ω 1W 1% EAM16FT1R82DES resistor indispensable in several key sectors:

1.  Automotive Electronics: Modern vehicles are rich in electronics and contain sulfurous materials like gaskets and cables. Components used in Engine Control Units (ECUs), sensors, and lighting systems must be immune to sulfur degradation to ensure vehicle safety and reliability over its entire lifespan.

2.  Industrial Automation and Control Systems: Factories and industrial settings often have atmospheres contaminated with sulfur compounds. This resistor is ideal for use in motor drives, PLCs, and power supplies within these harsh environments.

3.  Telecommunications Infrastructure: Base stations and network equipment are frequently located in industrial or urban areas with high pollution levels. The anti-sulfuration feature ensures signal integrity and prevents unexpected downtime.

4.  Power Management Circuits: Its 1.82Ω value and 1W power rating make it perfect for use as a current-sensing shunt resistor in switch-mode power supplies (SMPS), voltage regulators, and battery management systems (BMS). The low inductance is particularly beneficial here for maintaining efficiency and stability in high-switching-frequency designs.

5.  Consumer Durables and Outdoor Electronics: For any electronic device expected to have a long service life, especially those used in varying environmental conditions, using anti-sulfurated resistors like this model preempts a common failure mode.

Conclusion

The 1206 1.82Ω 1W 1% EAM16FT1R82DES Anti-Sulfurated Resistor is more than just a circuit component; it is a strategic investment in product reliability. By integrating advanced metal film technology with specialized anti-corrosion protection and a low-inductance design, it addresses multiple potential failure points simultaneously. Its compliance with RoHS, REACH, and lead-free standards further underscores its suitability for the global market. For design engineers seeking a dependable, high-performance 1.82 Ohm resistor that can withstand the test of time and environment, this component offers an optimal and forward-thinking solution, ensuring that their electronic products deliver on the promise of durability and precision.