0402 4.7KΩ 0.1W Thin Film Chip Resistor Precision Thin Film SMD Resistor for

CRH0402F4K70Q10Z 0402 4.7K 0.1W Ever Ohms Resistor — Product Overview

Product Summary

The CRH0402F4K70Q10Z is a surface-mount thin-film resistor manufactured by Ever Ohms, featuring a 0402 package (metric 1005), a nominal resistance of 4.7KΩ, and a rated power of 0.1W. This component is widely used in consumer electronics, telecom equipment, and industrial control boards. TE has built a solid reputation in the chip resistor market through consistent quality and mature production lines.

Key Specifications

The 0402 4.7K 0.1W Ever Ohms resistor uses a tin oxide thin-film process on a high-purity alumina ceramic substrate. The "F" tolerance band indicates ±1% accuracy, suitable for precision circuits. The 100ppm/℃ temperature coefficient keeps resistance drift under control across a wide thermal range.

Construction & Technology

Resistive film is sputter-deposited onto the ceramic body, then laser-trimmed to hit the exact 4.7KΩ target. The 0402 form factor demands high-precision pick-and-place equipment and controlled solder profiles. TE's automated optical inspection lines verify resistance distribution and physical quality before shipment.

Thin-film construction gives this resistor better high-frequency behavior, lower noise, and improved long-term stability compared with thick-film alternatives. Engineers favor the 0402 4.7K 0.1W Ever Ohms resistor for RF front-ends, ADC reference networks, and sensor signal conditioning.

Typical Applications

• Smartphones and tablets: pull-up/pull-down, voltage dividers, impedance matching
• IoT modules: bias circuits in NB-IoT and LoRa transceivers
• Automotive electronics: AEC-Q200 qualified versions for body control and ADAS
• Industrial instrumentation: precision voltage sampling with high-resolution ADCs

Where to Source

For genuine CRH0402F4K70Q10Z stock, buying through authorized distributors ensures traceability and reliability. Shenzhen Shunhai Technology Co., Ltd. carries a full range of Ever Ohms chip resistors with steady lead times, ideal for prototyping and medium-volume orders. Huanian Mall is another trusted electronics marketplace that supports online quoting and single-stop BOM fulfillment for this part number.

Design & Handling Guidelines

1. Derating: In ambient temperatures above 70℃, operate the 0.1W rating at no more than 70% to prevent drift.
2. Soldering: Keep reflow peak below 260℃ for under 10 seconds to protect the thin film.
3. PCB Layout: Maintain at least 0.2mm clearance between 0402 pads for inspection and rework.
4. Storage: Reseal remaining tape in a dry cabinet after opening; the typical MSL is Level 1, with a 12-month floor life after exposure

5. Recommended similar products:

   Part Number	Parameter
   CRH0603F1K80P05Z	0603 1.8K 0.125W 1%
   CRH0603F1R10P05Z	0603 1.1R 0.125W 1%
   CRH0603F1R20P05Z	0603 1.2R 0.25W 1%
   CRH0603F1R60P05Z	0603 1.6R 0.25W 1%
   CRH0603F2R00P05Z	0603 2R 0.25W 1%
   CRH0603F2R40P05Z	0603 2.4R 0.25W 1%
   CRH0603F348KP05Z	0603 348R 0.25W 1%
   CRH0603F34K8P05Z	0603 34.8K 0.25W 1%
   CRH0603F360RP05Z	0603 360R 0.25W 1%
   CRH0603F390KP05Z	0603 390K 0.125W 1%
   CRH0603F390RP05Z	0603 390R 0.125W 1%

6.