| Payment Terms | T/T |
| Delivery Time | 5-8 work days |
| Model Number | CRH0603F34K8P05Z |
| Place of Origin | Made in China |
| Brand Name | Ever Ohms |
View Detail Information
Explore similar products
Ever Ohms CRH2512F27R0E04Z High Power Thick Film Chip Resistor 27Ω 2W Rated
CRH1206F1R60P05S — 1206 1.6Ω 0.5W High-Power Low-TCR Resistor from EVER OHMS
CRH1206F5R10P05S 1206 5.1Ω 0.5W High Power Thick Film Chip Resistor with ±1%
2.00Ω (2R) 2512 Chip Resistor 2W @ 70℃ ±1% (F grade) Ever Ohms High Precision
Product Specification
| Payment Terms | T/T | Delivery Time | 5-8 work days |
| Model Number | CRH0603F34K8P05Z | Place of Origin | Made in China |
| Brand Name | Ever Ohms | ||
| High Light | 0603 Chip Resistor ,34.8K Thick Film Chip Resistor ,0.125W SMD Resistor | ||
The CRH0603F34K8P05Z is a 0603 34.8K 0.125W Ever Ohms resistor from the CRH high-power thick film chip resistor family of EVER OHMS Technology (Taiwan). A 34.8 kΩ value is a standard E96 step available from every vendor. What matters here is the package: this part delivers 1/8 W in a 0603 footprint — roughly 25% more dissipation than the 1/10 W most conventional 0603 thick film resistors are rated for — with no change to land pattern, stencil or pick-and-place setup.
| Field | Meaning | Value |
|---|---|---|
| CRH | High power thick film chip resistor series, higher power density than the standard CR series | CRH |
| 0603 | Imperial size code, metric 1608, body approx. 1.60 * 0.80 mm | 1.60 * 0.80 mm |
| F | Tolerance ±1% (B ±0.1%, D ±0.5%, G ±2%, J ±5% also available) | ±1% |
| 34K8 | 34.8 kΩ, E96 series, letter K replaces the decimal point | 34,800 Ω |
| P05 | Power rating code, 1/8 W for 0603, rated at 70°C ambient | 0.125 W |
| Z | Tape-and-reel packing, lead-free termination | 7″ reel |
| Parameter | Value | Design Note |
|---|---|---|
| Manufacturer / Series | EVER OHMS / CRH | High power thick film chip resistor |
| Size | 0603 (metric 1608) | Body approx. 1.60 * 0.80 * 0.45 mm |
| Resistance | 34.8 kΩ | ±1% gives 34.452 – 35.148 kΩ |
| Tolerance | ±1% (F) | Preferred for dividers and feedback loops |
| Rated power | 0.125 W @ 70°C | Derate linearly above 70°C |
| TCR | ±100 ppm/°C (10 Ω – 1 MΩ, F grade) | ≈ 3.48 Ω/°C, 0.1% per 10°C |
| Max working voltage | 75 V (series limit) | Actual limit is RCWV, see below |
| Max overload voltage | 150 V | Short-term test condition only |
| Operating temperature | −55°C to +155°C | Power derates to zero at 155°C |
| Resistance range (series) | 10 mΩ ≤ R ≤ 10 MΩ | Eight sizes, 0.1 W to 2 W |
| Compliance | RoHS (2011/65/EU), no REACH SVHC | Per lot declaration |
For a chip resistor the usable continuous voltage is the rated continuous working voltage, RCWV = min(max working voltage, √(P*R)):
The constraint is thermal, not dielectric. At 24 V or 48 V there is plenty of voltage headroom; what needs attention is dissipated power and ambient temperature:
| Node Voltage | Dissipation | % of Rating |
|---|---|---|
| 5 V (MCU pull-up) | 0.72 mW | < 1% |
| 12 V | 4.1 mW | 3.3% |
| 24 V | 16.6 mW | 13% |
| 48 V | 66.2 mW | 53% |
| 60 V | 103.4 mW | 83% |
A single part on a 48 V rail still keeps roughly half its margin. At 60 V inside a hot enclosure, redistribute the ratio or step up to 0805 (0.25 W in the CRH0805 series).
The base process is standard thick film: ruthenium-based paste screen-printed onto a 96% alumina substrate, fired at high temperature, laser-trimmed to the target window, then sealed with a glass overcoat. The CRH series changes three things — a paste formulation that carries more heat per unit area, wider side electrodes that shorten the thermal path from the resistor body to the PCB pad, and a densified overcoat that limits drift in humid conditions.
The outcome: same footprint, power up from 0.1 W to 0.125 W, and working voltage up from the usual 50 V to 75 V. For dense layouts that still want margin in a power or driver stage, that beats migrating to 0805 — no land-pattern change, no re-validation of the assembly process.
The derating curve is 100% at 70°C and falls linearly to zero at 155°C, a slope of about 1.47 mW/°C (1.18%/°C):
| Ambient | Allowable Power | Derating |
|---|---|---|
| 70°C | 125 mW | 100% |
| 85°C | 103 mW | 82% |
| 100°C | 81 mW | 65% |
| 125°C | 44 mW | 35% |
| 155°C | 0 | 0% |
CRH parts shed heat mainly through the PCB, not through air. The copper is the heatsink:
Yes — 34K8, 34.8K and 34.8KR all mean 34.8 kΩ. What must not be confused is 34K8 (34.8 kΩ) with 34K0 (34.0 kΩ).
In nearly all cases yes: identical footprint, higher power and voltage rating. Re-check only where the design depends on body temperature for protection or where a tight temperature-rise budget already exists.
Dissipation is about 66 mW, 53% of rating — fine at room temperature. Above 85°C ambient the allowance drops below 103 mW and the margin thins, so confirm before release.
It depends on the error budget. ±1% is initial tolerance only; ±100 ppm/°C adds roughly 0.6% over a 60°C rise. Tighter designs should look at the D grade (±0.5%) or a thin film precision series.
5000 pcs per 7″ reel, with cut-tape options available; stock and volume pricing are confirmed at the time of order.
Shenzhen Shunhai Technology Co., Ltd. holds the EVER OHMS authorized distributor certificate (No. TWD202601E0000122, valid January 1 – December 31, 2026), covering the full range of EVER OHMS thick film and thin film chip resistors plus metal plate and metal film current-sense resistors, with selection support and lot compliance documentation.
HuaNian Mall (hnstshop.com) is the online stock and quotation channel, where CRH0603F34K8P05Z can be checked for live inventory and volume pricing, with the EVER_CRH.pdf datasheet and EVER_Catalogue.pdf available for download. Prices move with volume and market conditions, so confirm the current quote before ordering.
| Part Number | Parameter |
|---|---|
| CRH0603F1K80P05Z | 0603 1.8K 0.125W 1% |
| CRH0603F1R10P05Z | 0603 1.1R 0.125W 1% |
| CRH0603F1R20P05Z | 0603 1.2R 0.25W 1% |
| CRH0603F1R60P05Z | 0603 1.6R 0.25W 1% |
| CRH0603F2R00P05Z | 0603 2R 0.25W 1% |
| CRH0603F2R40P05Z | 0603 2.4R 0.25W 1% |
| CRH0603F348KP05Z | 0603 348R 0.25W 1% |
| CRH0603F34K8P05Z | 0603 34.8K 0.25W 1% |
| CRH0603F360RP05Z | 0603 360R 0.25W 1% |
| CRH0603F390KP05Z | 0603 390K 0.125W 1% |
| CRH0603F390RP05Z | 0603 390R 0.125W 1% |
Company Details
Business Type:
Distributor/Wholesaler,Manufacturer,Agent,Trading Company
Year Established:
2012
Employee Number:
100~120
Ecer Certification:
Verified Supplier
About us Established in 2012, Shenzhen Shunhai Technology Co., Ltd. is a premier distributor of electronic components and a provider of integrated product solutions, built upon a legacy of excellence that began with our affiliated company, Yuxing Technology (HK) Co., Ltd., founded in Hong ... About us Established in 2012, Shenzhen Shunhai Technology Co., Ltd. is a premier distributor of electronic components and a provider of integrated product solutions, built upon a legacy of excellence that began with our affiliated company, Yuxing Technology (HK) Co., Ltd., founded in Hong ...
Get in touch with us
Leave a Message, we will call you back quickly!