| Rated power | 0.5W @70℃ |
| Operating temperature | −55℃ to +155℃ |
| Payment Terms | T/T |
| Insulation resistance | ≥10GΩ |
| Delivery Time | 5-8 work days |
| Max. working voltage | 200V class |
| Resistance | 36Ω, ±1% |
| TCR | ±100ppm/℃ |
| Model Number | CRH1206F36R0P05Z |
| Place of Origin | Made in China |
| Brand Name | Ever Ohms |
View Detail Information
Explore similar products
Ever Ohms CRH2512F27R0E04Z High Power Thick Film Chip Resistor 27Ω 2W Rated
CRH1206F1R60P05S — 1206 1.6Ω 0.5W High-Power Low-TCR Resistor from EVER OHMS
CRH1206F5R10P05S 1206 5.1Ω 0.5W High Power Thick Film Chip Resistor with ±1%
2.00Ω (2R) 2512 Chip Resistor 2W @ 70℃ ±1% (F grade) Ever Ohms High Precision
Product Specification
| Rated power | 0.5W @70℃ | Operating temperature | −55℃ to +155℃ |
| Payment Terms | T/T | Insulation resistance | ≥10GΩ |
| Delivery Time | 5-8 work days | Max. working voltage | 200V class |
| Resistance | 36Ω, ±1% | TCR | ±100ppm/℃ |
| Model Number | CRH1206F36R0P05Z | Place of Origin | Made in China |
| Brand Name | Ever Ohms | ||
| High Light | 36Ω High-Power Chip Resistor ,0.5W Thick Film Chip Resistor ,1206 footprint CRH-series Resistor | ||
CRH1206F36R0P05Z is EVER OHMS' CRH-series high-power thick-film chip resistor — the part engineers refer to as "1206 36R 0.5W resistor." It delivers 0.5W in a standard 1206 footprint (double the usual 0.25W), with 36Ω ±1% resistance and a −55℃ to +155℃ operating range. That combination makes it a natural fit for nodes that see continuous dissipation or repeated pulses: soft-start and gate-drive circuits in switch-mode power supplies, LED driver limiting and bleeder networks, industrial input protection, BMS precharge and balancing, and snubber circuits in inverter boards.
| Field | Meaning |
|---|---|
| CRH | EVER OHMS high-power thick-film chip resistor series |
| 1206 | Imperial package, approx. 3.2mm × 1.6mm metric |
| F | Tolerance ±1% (E96) |
| 36R0 | Nominal resistance 36Ω |
| P05 | Rated power 0.5W |
| Z | Lead-free termination, RoHS compliant |
Writing only "1206 36Ω 1/2W" in a BOM risks receiving ±5% tolerance or an ordinary 0.25W CR-series part. Always specify the full part number.
No layout change. Upgrading power doesn't require moving to 1210 or 1812 — pads, traces and stencils stay as they are. For boards already released, this is the cheapest way to gain headroom.
Lower temperature rise, less drift. At the same 0.15W dissipation, CRH1206 runs at a fraction of its rating. Lower temperature means smaller TCR-induced resistance change and more stable divider ratios.
Better pulse endurance. Motor start/stop, relay pull-in, power-on inrush and induced surges all dump energy in microsecond-to-millisecond bursts. The ceramic substrate and thick-film structure handle higher pulse energy than an ordinary 0.25W part.
Zero process change. Identical size and weight mean reflow/wave soldering compatibility and placement yield are unchanged.
Switch-mode power supplies, adapters, DC-DC modules
Soft-start/inrush limiting; MOSFET/IGBT gate drive resistor (36Ω is a common gate-damping value for ringing suppression and dv/dt control); snubber branch in series with the capacitor; output bleeder resistor for safe discharge after power-off; dummy load and feedback divider networks.
LED drivers and lighting power
Current-limiting in surge-suppression branches, auxiliary current-sense roles, parallel LED string balancing, and driver IC timing/compensation. Luminaires run hot and tight on space — 0.5W in 1206 helps pass thermal validation without enlarging the package.
Industrial control and automation
PLC 24V digital-input current limiting with optocouplers; relay/contactor coil protection with freewheeling diodes or RC snubbers; gate resistors and braking-unit snubbers in VFD/servo drives; sensor supply dividers.
Battery, energy storage and BMS
Precharge current limiting, balancing-branch limiting and discharge, PACK sampling protection dividers, and charge/discharge interface bleeders. Confirm batch traceability and RoHS documentation for these applications.
Consumer appliances
Inverter boards for air conditioners and refrigerators, washing-machine motor drives, TV/monitor power supplies — used at PFC gate drive, standby bleeder, and EMI filter damping.
Telecom and servers
Hot-swap port inrush limiting, power-module soft-start, PoE PD input protection, motherboard discharge resistors. Since equipment runs continuously, derating directly affects field failure rates.
Automotive electronics (confirm automotive-grade batch)
ECU input protection, actuator driver gate resistors, BCM signal limiting and bleeder circuits. Verify AEC-Q200 status, sulfur resistance, and derating at actual board temperatures.
Shenzhen Shunhai Technology Co., Ltd. — an authorized distributor of EVER OHMS in mainland China, covering the full EVER OHMS product line with continually updated authorization. Shunhai supplies genuine CRH1206F36R0P05Z, supports small-batch prototyping through mass production, and provides selection guidance, cross-reference matching and lead-time confirmation. It also carries WALTER, ELLON, LIZHI and other brands for one-stop BOM kitting.
HuaNian Mall — Shunhai's online purchasing platform, where you can search EVER OHMS part numbers, check real-time stock and tiered pricing, and place inquiries or orders online. It suits quick price comparison, small-batch replenishment and one-stop BOM fulfillment.
Before ordering, confirm three items: tolerance (±1% or ±5%), packaging (full reel of 5000 or loose), and whether the datasheet and environmental reports are required.
Can CRH1206F36R0P05Z replace CR1206F36R0P05Z? Yes — same footprint, value and tolerance, with power raised from 0.25W to 0.5W. It's an upward-compatible swap. The reverse direction requires re-checking dissipation.
±1% or ±5% for 36Ω? Use ±1% for reference dividers, signal conditioning and gate-drive consistency; ±5% (CRH1206J36R0P05Z) is cheaper for simple limiting or bleeding.
Is there a cross-brand equivalent? Compare by specification "1206 36Ω 0.5W ±1% high-power thick film," focusing on the temperature basis of the power rating, TCR, overload capability and lead time — not unit price alone.
Can 36Ω be used for current sensing? It can, but it's inefficient. Current sensing is better served by milliohm shunts; 36Ω belongs in limiting, bleeder, gate-drive and divider roles.
Company Details
Business Type:
Distributor/Wholesaler,Manufacturer,Agent,Trading Company
Year Established:
2012
Employee Number:
100~120
Ecer Certification:
Verified Supplier
About us Established in 2012, Shenzhen Shunhai Technology Co., Ltd. is a premier distributor of electronic components and a provider of integrated product solutions, built upon a legacy of excellence that began with our affiliated company, Yuxing Technology (HK) Co., Ltd., founded in Hong ... About us Established in 2012, Shenzhen Shunhai Technology Co., Ltd. is a premier distributor of electronic components and a provider of integrated product solutions, built upon a legacy of excellence that began with our affiliated company, Yuxing Technology (HK) Co., Ltd., founded in Hong ...
Get in touch with us
Leave a Message, we will call you back quickly!