CRH1206FR250P05Z 1206 Chip Resistor: 0.25Ω 0.5W High Power Thick Film with ±1%

The CRH1206FR250P05Z is a thick-film high-power chip resistor manufactured by EVER OHMS as part of its CRH series. Encapsulated in a standard 1206 package, it offers a nominal resistance of 0.25 ohms (250 mΩ), a rated power of 0.5 W, and a resistance tolerance of ±1%. Characterized by low resistance, high power density, and reliable thermal stability, this component is widely used in current sensing, over-current protection, and power loop circuits that require precise current monitoring.

As a 1206 0.25R 0.5W resistor, the CRH1206FR250P05Z delivers half-watt power handling within a compact footprint, balancing PCB space constraints with thermal dissipation requirements. It is a common choice in low-to-medium power management designs.

Understanding the nomenclature of CRH1206FR250P05Z helps engineers identify key specifications at a glance:

表格

表格

The 0.25Ω low-resistance design minimizes voltage drop in current sensing loops, reducing sampling losses. The ±1% tolerance meets the current detection requirements of most industrial and consumer power products, ensuring channel-to-channel consistency in mass production.

A 0.5 W rating in a 1206 package represents a high-power specification for this form factor. Designers should consider the effect of PCB copper area on heat dissipation — adequate copper around the pads is recommended. When the ambient temperature exceeds 70℃, power must be derated according to the manufacturer's derating curve.

With a TCR of ±600 ppm/℃, the maximum resistance drift across the full -55℃ to +155℃ range is approximately ±12.6%. For high-precision current sensing applications sensitive to temperature variation, thermal compensation circuitry or a lower-TCR alloy resistor should be considered.

The primary application of the CRH1206FR250P05Z is as a series current-sense resistor in power loops. Per Ohm's Law (U = I × R), a 0.25Ω resistor carrying 2A produces a 0.5V drop, which is amplified and fed to an ADC for real-time current monitoring. Common use cases include:

• Output current detection in switching power supplies (SMPS)
• Charge/discharge current monitoring in battery management systems (BMS)
• Phase current sampling in motor drive circuits
• Current feedback in LED constant-current drivers

In eFuse or fuse-replacement designs, this 1206 0.25R 0.5W resistor paired with a comparator enables fast over-current detection and shutdown, offering faster response and resettability compared to traditional thermal fuses.

In multi-channel parallel power supplies, series sense resistors of identical value enable passive current sharing, preventing uneven current distribution caused by component tolerances.

For reliable operation, it is recommended to keep continuous power below 70% of the rated value, i.e., under 0.35 W. For a 0.25Ω resistor, this corresponds to approximately 1.18 A continuous current. Higher sustained currents require a larger package or an alloy current-sense resistor.

• Use Kelvin (four-wire) connections at the sense resistor pads, separating power and signal traces to eliminate measurement errors from trace resistance
• Avoid placing temperature-sensitive components near the resistor
• Increase copper area around the pads and add thermal vias when necessary

If the CRH1206FR250P05Z is unavailable, equivalent 1206 0.25R 0.5W resistors from manufacturers such as Yageo, Walter, and Uniroyal can be considered. Always verify TCR, tolerance, and power rating match the original specification.

For volume purchasing and technical selection support, the following authorized distributors are recommended:

Shenzhen Shunhai Technology Co., Ltd. is an authorized distributor for EVER OHMS and other leading passive component brands. They offer stock availability and technical support for the CRH1206FR250P05Z and the full range of 1206 0.25R 0.5W resistors, including cross-reference assistance, sample requests, and volume fulfillment.

Huanian Mall is a professional online electronic components platform providing real-time inventory lookup and online ordering for this part number. It is well suited for small-to-medium batch procurement with original manufacturer traceability.