Shenzhen Meigaolan Electronic Instrument Co. Ltd
| Payment Terms | T/T |
| Supply Ability | in stock |
| Packaging Details | carton |
| Product name | Signal Analyzer |
| Frequency | 10 Hz to 13.6 GHz |
| Warranty | one month |
| Usage | spectroradiometer integrating sphere spectrum analyzer for led |
| Condition | Pre-Owned |
| Functions | Tested, in Full Working Conditions |
| Brand Name | Rohde and Schwarz |
| Model Number | FSV13 |
| Certification | FCC |
| Place of Origin | Germany |
View Detail Information
Explore similar products
Practical Keysight Spectrum Analyzers , N9020B Keysight MXA Signal Analyzer
Portable MXA Signal Analyzer Keysight Agilent N9020A 10 Hz To 26.5 GHz
Practical 40GHz FSV40 Spectrum Analyzer , Rohde & Schwarz FSV40 Signal Analyser
Used Vector EMI Signal Spectrum Analyzer Rohde & Schwarz FSV30
Product Specification
| Payment Terms | T/T | Supply Ability | in stock |
| Packaging Details | carton | Product name | Signal Analyzer |
| Frequency | 10 Hz to 13.6 GHz | Warranty | one month |
| Usage | spectroradiometer integrating sphere spectrum analyzer for led | Condition | Pre-Owned |
| Functions | Tested, in Full Working Conditions | Brand Name | Rohde and Schwarz |
| Model Number | FSV13 | Certification | FCC |
| Place of Origin | Germany | ||
| High Light | Universal Signal Spectrum Analyzer ，Wideband Signal Spectrum Analyzer ，R&S FSV13 | ||
R&S®FSV13 Signal and Spectrum Analyzer Universal and wideband
Description of FSV13
The R&S®FSV is the fastest and most versatile signal and spectrum analyzer available for performanceoriented, cost-conscious users working in the development, production, installation and servicing of RF systems.
| 30-DKD | FSV30 DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
| B1 | Ruggedized housing with adjustable carrying handle (not retrofittable, not for |
| B10 | External generator control |
| B14 | Ultra-High Precision Frequency Reference |
| B17 | Digital baseband interface, retrofittable, detector board Rev. 05.01 required, |
| B18 | Solid state drive, 8GB, including analyzer firmware, replaces standard hard drive |
| B19 | Second hard disk incl. analyzer firmware for exchange against standard hard disk |
| B21 | LO/IF Ports for External Mixers |
| B22 | RF Preamplifier 20 dB, 9 kHz to 7 GHz |
| B24 | RF preamplifier 9kHz to 13GHz (for R&S® FSV13 only) not installable post factory |
| B25 | Electronic attenuator, 1 dB steps |
| B29 | Frequency Range Extension (20 Hz) |
| B3 | AM/FM demodulator for listening; includes loudspeaker, plug for headphone and volume control |
| B4 | OCXO, precision frequency reference, aging per year: 0.1 ppm |
| B5 | Additional interfaces. IF/Video/AM-FM-demod. output, AUX port, trigger output, 2 additional USB(A) |
| B70 | Extension to 40MHz signal analysis bandwidth |
| B9 | Tracking generator. 100 kHz - 7 GHz (FSV7 / FSV13 / FSV30); 100 kHz - 3.6 GHz (FSV3) |
| C3 | Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s). |
| C5 | Five years of calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 4 additional depot calibration(s). |
| DCV-2 | Documentation of calibration values |
| DCV-ZP | Printout of DCV (additional, in combination with DCV-Option only) |
| DKD | FSV13 DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
| FS-B33 | USB mass memory write protection, disables writing to USB memory sticks (ex factory only) |
| FSV30-DKD | FSV30 DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
| K10 | Analysis of GSM, EDGE and EDGE evolution signals |
| K100 | Analysis of EUTRA/LTE FDD downlink signals |
| K101 | Analysis of EUTRA/LTE FDD uplink signals |
| K102 | EUTRA/LTE Downlink MIMO measurement application (FSV-K100 or FSV-K104 required) |
| K104 | Analysis of EUTRA/LTE TDD downlink signals (for FSV) |
| K105 | Analysis of EUTRA/LTE TDD uplink signals (for FSV) |
| K14 | Spectrogram measurement application |
| K30 | Noise figure and gain measurements (Preamplifier R&S®FSV-B22 required) |
| K40 | Phase noise measurement application |
| K54 | EMI application for diagnostic of RF interference with spectrum analyzers R&S®FSV and |
| K7 | Analog modulation analysis for AM, FM, PM |
| K70 | Vector signal analysis application for modulation analysis of digital modulated single carrier signals |
| K72 | Analysis of 3GPP-FDD base station signals incl. HSPA+ |
| K73 | 3GPP-FDD UE analysis incl. HSPA |
| K76 | 3GPP TD-SCDMA BTS measurements application |
| K77 | 3GPP TD-SCDMA UE measurement application |
| K7S | FM stereo measurement application, measurement of L, R, M, S and pilot dev, Crosstalk, THB |
| K8 | Bluetooth/EDR measurement application (software license) |
| K82 | Analysis of CDMA2000 base station signals |
| K83 | CDMA2000 MS measurement application (software license) |
| K84 | Analysis of 1xEV-DO base station signals |
| K85 | 1xEV-DO MS measurement application (software license) |
| K9 | Power sensor measurement with NRP power sensors |
| K91 | Analysis of WLAN 802.11a,b,g,j signals |
| K91n | Extension of FSV-K91 to 802.11n (FSV-K91 required) |
| K93 | Analysis of Wimax 802.16 SISO signals |
| R3 | Three years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
| R5 | Five years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
| U1 | Upgrade to dual core CPU processor |
| Application Software |
|---|
| CDMA2000 ( /K82 ) |
| GSM with Edge ( /K10 ) |
| HSDPA ( /K72 ) |
| HSUPA ( /K73 ) |
| MIMO (802.11n) ( /K102 /K91n ) |
| Noise Figure ( /K30 ) |
| Phase Noise ( /K40 ) |
| TD-SCDMA ( /K76 ) |
| Average Noise Level |
|---|
| 155 dBm |
| Frequency |
|---|
| 20 Hz ( /B29 ) |
| 40 MHz ( /B70 ) |
| 100 KHz - 7 GHz ( /B9 ) |
| 9 KHz - 7 GHz ( /B22 ) |
FAQ:
1.Can you ship order to Canada or Australia ?
Yes,we can .We send orders worldwide .
2. What delivery method do you use ? and delivery time ?
We can ship by EMS,DHL,FedEx,UPS,TNT with tracking number. Usual delivery time is 4-7 workdays.
3. What is your payment term?
100% T/T payment before shipment.
4. How can I ask any other question ?
You can contact us online or leave us messages below .
Company Details
Business Type:
Distributor/Wholesaler
Year Established:
2003
Total Annual:
500000-1000000
Employee Number:
>100
Ecer Certification：
Verified Supplier
Meigaolan is a test and measurement solutions and production suppliers, founded in 2003 and located in Shenzhen,China. Our highly skilled Sale Representatives can assist you with all of your new and refurbished test equipment needs, providing EMC test solutions and building your Anechoic ... Meigaolan is a test and measurement solutions and production suppliers, founded in 2003 and located in Shenzhen,China. Our highly skilled Sale Representatives can assist you with all of your new and refurbished test equipment needs, providing EMC test solutions and building your Anechoic ...
Get in touch with us
Leave a Message, we will call you back quickly!