Shenzhen Meigaolan Electronic Instrument Co. Ltd
| Payment Terms | T/T |
| Supply Ability | in stock |
| Delivery Time | 1~3 Working Days |
| Packaging Details | Carton |
| Product name | Microwave Signal Generator |
| Condition | Pre-Owned |
| Functions | Tested, in Full Working Conditions |
| Frequency | 10 MHz to 40 GHz |
| Brand Name | Anritsu |
| Model Number | 68369B |
View Detail Information
Explore similar products
250KHz-40GHz PSG CW Signal Generator Keysight Agilent E8247C
2GHz Digital RF Signal Generator Keysight Agilent E4431B ESG D Series
Benchtop Synthesized Signal Generator , Keysight Agilent 83731B RF Source
Portable ESG RF Signal Generator Keysight Agilent E4438C Durable
Product Specification
| Payment Terms | T/T | Supply Ability | in stock |
| Delivery Time | 1~3 Working Days | Packaging Details | Carton |
| Product name | Microwave Signal Generator | Condition | Pre-Owned |
| Functions | Tested, in Full Working Conditions | Frequency | 10 MHz to 40 GHz |
| Brand Name | Anritsu | Model Number | 68369B |
| High Light | Multipurpose Signal Generator ，Anritsu 68369B Signal Generator ，10 MHz to 40 GHz Signal Generator | ||
| Frequency Output | Twenty independent, presettable CW frequencies (F0 to F9 and M0 to M9) |
| Accuracy | Same as internal or external 10 MHz time base |
| CW Mode Stability | With aging: <2 × 10⁻⁸/day (<5 × 10⁻¹⁰/day with Option 16) With temperature: <2 × 10⁻⁸/°C over 0°C (<2 × 10⁻¹⁰/°C with Option 16) |
| Resolution | 1 kHz (0.1 Hz with Option 11) |
| Switching Time | <40 ms to be within 1 kHz of final frequency (typical maximum) |
| Sweep Width | Independently selected, 1 kHz (0.1 Hz with Option 11) to full range. Every frequency step in sweep range is phase-locked. |
| Phase-Locked Step Sweep Mode | Number of steps: Variable from 1 to 10000 Step size: 1 kHz (0.1 Hz with Option 11) to full frequency range Dwell time per step: Variable from 1 ms to 99 seconds Switching time: <15 ms +1 ms/GHz step size or <40 ms, whichever is less (typical max.) |
| Alternate Sweep Mode | Sweeps alternately between any two sweep ranges. Each sweep range may be associated with a different power level. |
| Manual Sweep Mode | Provides stepped, phase-locked adjustment of frequency between sweep limits. User-selectable number of steps or step size. |
| Programmable Frequency Agility | Under GPIB control, up to 1000 non-sequential frequencies can be stored and then addressed as a phase-locked step sweep. Data is stored in volatile memory. |
| Markers | Up to 20 independent, settable markers (F0 to F9 and M0 to M9) Video markers: +5 V or -5 V marker output, selectable. AUX I/O connector, rear panel Intensity markers: Produces an intensified dot on trace, obtained by momentary dwell in RF sweep |
| Frequency Range | Output Power | Output Power with Step Attenuator |
| ≥0.01 to <2 GHz | +13 dBm | +11 dBm |
| ≥2 to ≤20 GHz | +9 dBm | +7 dBm |
| >20 to ≤40 GHz | +6 dBm | +3 dBm |
| Stored Setups | Stores front panel settings and nine additional front-panel setups in non-volatile RAM. System menu allows saving and recalling of instrument setups. |
| Memory Sequencing Input | Accepts TTL low-level signal to sequence through nine stored setups. AUX I/O connector, rear panel. |
| Self-Test | Instrument self-test performed when SELF TEST soft-key is selected. Error messages identify probable causes. |
| Secure Mode | Disables all frequency, power level, and modulation state displays. Stored setups remain secured when recalled. |
| Reset | Returns instrument parameters to predefined default states or values. Any pending GPIB I/O is aborted. |
| Master/Slave Operation | Allows two 68X00B output signals to be swept with user-selected frequency offset. Requires MASTER/SAVE interface cable set (part no. ND36329). |
| User Level Flatness Correction | Allows user to calibrate out path loss due to external switching and cables via entered power table. Five user tables available at up to 801 points/table. |
| Warm Up Time (Standard Time Base) | From standby: 30 minutes From cold start (0°C): 120 hours to achieve <2 × 10⁻⁸/day frequency stability |
| Warm Up Time (Option 16 Time Base) | From standby: 30 minutes From cold start (0°C): 72 hours to achieve <5 × 10⁻¹⁰/day frequency stability |
| Power | 90 to 132 Vac or 180 to 264 Vac, 49 to 440 Hz, ≤400 VA |
| Dimensions and Mass | 429 (W) × 133 (H) × 597 (D) mm [5.25 (H) × 16.875 (W) × 23.5 (D) in.], ≤23 kg (50 lb) |
| RF Output Connector | Type K female (≤40 GHz models), Type V female (>40 GHz models) |
Company Details
Business Type:
Distributor/Wholesaler
Year Established:
2003
Total Annual:
500000-1000000
Employee Number:
>100
Ecer Certification：
Verified Supplier
Meigaolan is a test and measurement solutions and production suppliers, founded in 2003 and located in Shenzhen,China. Our highly skilled Sale Representatives can assist you with all of your new and refurbished test equipment needs, providing EMC test solutions and building your Anechoic ... Meigaolan is a test and measurement solutions and production suppliers, founded in 2003 and located in Shenzhen,China. Our highly skilled Sale Representatives can assist you with all of your new and refurbished test equipment needs, providing EMC test solutions and building your Anechoic ...
Get in touch with us
Leave a Message, we will call you back quickly!