POE36PR-12ED POE++ Flyback And Forward Transformers

Product Specification

• Flyback and Forward transformers for PoE up to 72 Watts
• Operates with 9 – 57 V input (POE21, 22, 24, 33, 35 and 38)
• Operates with 33 – 57 V input (POE23, 30, 36, 53, 70, and 72)
• One minute isolation (hipot): 1500Vrms, from pri and aux to each
sec; 500Vrms from pri to aux; 500Vrms between two secondary
• Dual outputs can be configured as one single higher power output
• AEC-Q200 Grade 1 (–40°C to +125°C)

Core material  Ferrite

Environment   RoHS compliant, halogen free

Terminations   Tin-silver-copper over tin over nickel over phos bronze

Weight   7.1 – 7.9 g

Ambient temperature  –40°C to +125°C

Maximum part temperature  +165°C (Ambient + temp rise)

Storage temperature Component: –40°C to +165°C

Tape and reel packaging: –40°C to +80°C

Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity)

Failures in Time (FIT) / Mean Time Between Failures (MTBF)

38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

1. Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (150 parts per full reel). Quantities less than
full reel available: in tape (not machine ready) or
with leader and trailer ($25 charge).
2. Inductance is for the primary, measured at 200 kHz, 0.1 Vrms, 0 Adc.
3. Leakage inductance measured between pins 1 and 3 with all other
pins shorted.
4. Output is for each secondary. Output of the aux winding is 10 V, 50 mA.
5. Based on 280 mT at 25°C and number of turns on pins 1-3.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.

Why is it called a flyback transformer?

The reason it is called a flyback transformer is because the primary winding uses a relatively low-voltage saw-tooth wave. The wave gets strengthened first and then gets switched off abruptly; this causes the beam to fly back from right to left on the display.

​

FAQ
the questions which our partner ask most
Q1. How about the quality?
A: We tested 100% before we ship out.We offer 90- 180days quality assurance.
Q2. What is your terms of payment?
A: Order below 10000USD is T/T 100% in advance .
B:Order over 10000USD T/T 50% as deposit to arrange goods.and rest 50% before delivery.
C:Sample order we can support

PAYPAL , WERTERN UNION,UnionPay and Alipay.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.(defaults EXW for all quotation)
Q4. How about your lead time?
A: There are no lead time for in-stock products.We can ship out within 1-3days after you confirmed the payment.

B:Customized product,we will ship out within our professional invoice show.

Q5. What is your sample policy?
A: Most of products,we can offer free samples;you just need pay the shipping cost.

Q6:Can we ask support if get trouble?

Sure, if there is any quality problems or questions;we could offer technical support or return service .
Q7. Can we return back the goods?
A: Sure, if you are not satisfied with the quality;you can send the original box back to exchange or refund.You pay the return ship cost.We pay the back cost.

B:If you get wrong item and the mistake made by yourself;we can offer return too.But you should pay the ship cost both.And you can ask us to exchange or refund.