Sino Construction Equipment Co., Ltd
| Payment Terms | L/C, T/T |
| Supply Ability | 500 Unit/Units per Month |
| Delivery Time | 30-35 work days after receiving the deposit |
| Packaging Details | In nude |
| Tire inflation pressure | 260 KPa |
| Space of middle and rear wheels | 1538mm |
| Ground clearance (front axle) | 430MM Space of front and rear axles: 6219mm |
| Working system pressure | 20MPa |
| Maximum lift height | 400mm |
| Dimension(L*W*H) | 8970*2625*3420mm |
| Brand Name | XCMG |
| Model Number | GR2153 |
| Certification | ISO CCC |
| Place of Origin | China |
View Detail Information
Explore similar products
Construction Motor Grader Machine
Easy Operation 1950rpm SAG200C-8 Construction Motor Grader
Small Construction Motor Grader Equipment Used In Road Construction 160HP GR1653
Low Noise Construction Small Road Grader Gr3505 Heavy Equipment Machinery
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 500 Unit/Units per Month |
| Delivery Time | 30-35 work days after receiving the deposit | Packaging Details | In nude |
| Tire inflation pressure | 260 KPa | Space of middle and rear wheels | 1538mm |
| Ground clearance (front axle) | 430MM Space of front and rear axles: 6219mm | Working system pressure | 20MPa |
| Maximum lift height | 400mm | Dimension(L*W*H) | 8970*2625*3420mm |
| Brand Name | XCMG | Model Number | GR2153 |
| Certification | ISO CCC | Place of Origin | China |
| High Light | road grading equipment ，road grader machine | ||
220HP Road Construction Motor Grader Equipment Front And Rear Axles GR2153
XCMG 220HP GR2153 Road Construction Motor Grader Tractor Road Wheel Motor Grader
Product Description
Road Construction Motor Graders Tractor Road Wheel Motor Grader
1. Energy-saving and noise-reducing: adopt low-speed engine transmission line, low specific fuel consumption of rated point, energy saving and environmental protection; low-speed ratio configuration of transmission system, average fuel consumption reduced by about 8%
2. Strong Power: Adopting Sichai High-efficiency State III Variable Power Engine
3. With load rotation: to improve the hydraulic system pressure, blade rotary force greatly improved, high-frequency quenching gear ring, wear resistance and life expectancy, to achieve load rotation.
4. Efficient operation: The displacement of the hydraulic pump and the hydraulic motor is increased, the speed of the cylinder is increased by 20%, and the operating efficiency leads the industry.
Road Construction Motor Grader Tractor Road Wheel Motor Grader Main parameter
| Item | GR2153 | ||
| Basic parameters | Engine model | QSB6.7 | |
| Rated power/speed | 164kW/2000rpm | ||
| Overall dimension (standard) | 8970x2625x3420 | ||
| Total weight (standard) | 16500 kg | ||
| Tire specification | 17.5-25 | ||
| Ground clearance (front axle) | 430mm | ||
| Tread | 2156mm | ||
| Space of front and rear axles | 6219 mm | ||
| Space of middle and rear wheels | 1538 mm | ||
| Performance parameters | Forward velocity | 5,8,11,19,23,38km/h | |
| Reverse speed | 5,11,23km/h | ||
| Tractive effort f=0.75 | 85 kN | ||
| Maximum gradeability | ≥25% | ||
| Tire inflation pressure | 260kPa | ||
| Working system pressure | 20MPa | ||
| Transmission pressure | 1.3—1.8Mpa | ||
| Working parameters | Maximum steering angle of front wheel | ±48° | |
| Maximum slant angle of front wheel | ±17° | ||
| Maximum oscillating angle of front axle | ±15° | ||
| Maximum oscillating angle of equilibrium box | ±15° | ||
| Maximum steering angle of frame | ±27° | ||
| Minimum turning radius | 7.3m | ||
| Scrape knife | Maximum lift height | 400mm | |
| Maximum cutting depth | 500mm | ||
| Maximum tilt angle | 90° | ||
| Cutting angle | 28°—70° | ||
| Angle of revolution | 360° | ||
| Length & chord height | 4270x610mm | ||
| Oil filling amount | Coolant | 50L | |
| Fuel tank | 280L | ||
| Engine | 24L | ||
| Transmission | 38L | ||
| Balancing box | 46L | ||
| Drive axle | 28L | ||
| Hydraulic oil | 110L | ||
Road Construction Motor Grader Tractor Road Wheel Motor Grader Advantage
1. The torque converter has a large torque coefficient, a high efficiency, a wide effective area, and a good joint operation characteristic with the engine.
2. The drive axle is a dedicated XCMG axle.
3. Rear axle main drive is equipped with "NO-SPIN" without self-locking differential. When one wheel slips, the other wheel can still transmit its original torque.
4. The service brake is a dual-circuit hydraulic brake system that acts on the two rear wheels of the grader and is safe and reliable.
5. The sealed cab is used to configure the air conditioning system. The interior parts are sleek and compact plastic parts, which fully reflects the needs of ergonomics.
FAQ
Q: What kind terms of payment can be accepted ?
A: Normally we can work on T/T terms or L/C term.
Q: Which incoterms 2010 terms can be work ?
A: Normally we work on FOB ,CIF
Q: What about the delivery time ?
A:7-30 work days after receiving the deposit
Q: What about the minimum order Quantity
A: The MOQ is 1pcs
Packing and Shipping
We supervise the process from the factory to the port designated by the customer to ensure that the customer's products arrive at the destination accurately and safely.
Comply with export packaging requirements at any china port.
More photo for your reference
Delivery:
Within 30 work days after receive the payment
Our customer all over the world:
Congo, Tanzania, Djibouti, Angola, Chad, Algeria, Sudan, Libya, Eritrea, Uganda, Rwanda, Burundi and the Seychelles. Mauritania, Western Sahara, Senegal, Gambia, Mali, Burkina Faso, Guinea, Guinea-Bissau, Cape Verde, Sierra Leone, Liberia, Côte d'Ivoire, Ghana, Togo, Benin, Niger, Nigeria , Namibia, Cameroon, Equatorial Guinea, Ethiopia, Kenya , Gabon and Zambia, Angola, Zimbabwe, Malawi, Mozambique, Botswana, and so on.
Russia, Kazakhstan, Kyrgyzstan, Bangladesh, Azerbaijan, Vietnam, Laos, Cambodia, the Philippines, Malaysia and so on.
Brazil, Bolivia, Uruguay, Peru, Ecuador , Trinidad and Tobago , Chile, Barbados , Argentina, Dominica, Cuba, and so on.
Welcome you join our client team , to Expand the territory!
Company Details
Business Type:
Agent,Exporter,Trading Company,Seller,Other
Year Established:
2005
Total Annual:
65000000-70000000
Employee Number:
100~150
Ecer Certification：
Active Member
Our company was established in 2003 and is located in Jingshi Road, Huaiyin District, Jinan City. The transportation is convenient. Our business scope includes all kinds of heavy road construction machinery, building machinery, heavy logistics vehicles and special vehicles. Including ro... Our company was established in 2003 and is located in Jingshi Road, Huaiyin District, Jinan City. The transportation is convenient. Our business scope includes all kinds of heavy road construction machinery, building machinery, heavy logistics vehicles and special vehicles. Including ro...
Get in touch with us
Leave a Message, we will call you back quickly!