Strong And Long-Lasting Road Markings With Thermoplastic Paint For Highway And

Thermoplastic road marking paint, also known as hot melt marking paint, is a widely used material for creating durable, high-visibility road markings. Here are some detailed descriptions of the product.

Composition

• Synthetic Resin: Provides thermoplasticity, enabling fast drying and strong adhesion to road surfaces. Non-polymeric resins, like colophony, are also used.
• Glass Beads: Added for retro-reflectivity, improving visibility at night by reflecting vehicle headlights. Bead sizes typically range from 0.1-1.4 mm.
• Pigments: Common colors are white (using titanium dioxide for UV resistance) and yellow (organic pigments like Pigment Yellow 65, 74, or 83). Other colors are available for specific applications.
• Fillers: Fine fillers (e.g., calcium carbonate) and coarse fillers (e.g., sand) enhance mechanical strength, wear resistance, and surface texture.
• Additives: Improve plasticity, resistance to subsidence, pollution, and color fading. Anti-skid aggregates can be added for better traction.

1. Clean the Road Surface: The area should be clean and dry. Remove dirt, debris, dust, oil, and any loose material using a broom, pressure washer, or cleaning equipment.
2. Dry the Surface: Make sure the surface is free of moisture before applying the paint.

1. Use a Heating System: Hot melt road marking paint needs to be heated to around 180–200°C (356–392°F). Use a dedicated melting pot or heated tank to melt the paint.
2. Maintain Proper Temperature: Keep the paint at the right temperature to ensure even application. It should be fluid enough to spread but not too hot to cause burns or uneven application.

1. Choose the Right Equipment: Use a road marking machine (manual or automatic) designed for hot melt paint. These machines often have an applicator that controls the flow of the paint.
2. Apply Evenly: Pour or spray the melted paint onto the prepared surface in a uniform layer. The paint will begin to solidify as it cools, so work efficiently.
3. Marking Width and Thickness: Depending on the machine, adjust the settings to achieve the correct width and thickness for the lines or symbols you are marking.

1. Cooling Time: After application, the paint will solidify relatively quickly as it cools down. This can take just a few minutes, depending on the weather and temperature.
2. Curing: Full curing might take a few hours. Ensure that traffic doesn’t pass over the markings too soon to prevent smudging or damaging the lines.

1. Clean the Machine: After use, clean your equipment thoroughly, especially the nozzle and hoses, to prevent the paint from hardening inside the machine.

1. Exceptional Durability: Lasts 3–5 years or longer, resisting wear from heavy traffic, UV rays, and harsh weather.
2. High Visibility: Retroreflective beads ensure clear visibility in low-light or adverse conditions, improving road safety.
3. Cost-Effective: Long lifespan reduces the need for frequent reapplication, lowering maintenance costs.
4. Strong Adhesion: Bonds firmly to pavement, minimizing peeling or fading.
5. Fast Application: Quick-drying properties reduce traffic disruption during application.
6. Environmentally Friendly: Many formulations are solvent-free, reducing VOC emissions.
7. Customizable: Supports complex designs like arrows, symbols, or textured markings for enhanced functionality.
8. Low Maintenance: Resists abrasion, oil, and chemicals, requiring minimal upkeep.

Hot melt thermoplastic paint is ideal for high-traffic roads, highways, and urban areas due to its longevity, safety features, and efficiency.

Contact Person:Rose