China factories

Chat Now Send Email
China factory - Dr.Industrial Robotic Technology Ltd

Dr.Industrial Robotic Technology Ltd

  • China,Shanghai ,Shanghai
  • Verified Supplier
  1. Home
  2. Products
  3. About Us
  4. Contact Us

Leave a Message

we will call you back quickly!

Submit Requirement
China QC-210 300kg Payload 2710Nm Heavy Duty Tool Changer for Robot Handling
China QC-210 300kg Payload 2710Nm Heavy Duty Tool Changer for Robot Handling

  1. China QC-210 300kg Payload 2710Nm Heavy Duty Tool Changer for Robot Handling

QC-210 300kg Payload 2710Nm Heavy Duty Tool Changer for Robot Handling

  1. MOQ:
  2. Price:
  3. Get Latest Price
Air Ports 5 x 3/8 NPT + 4 x 1/2 NPT
Locating Pins Hardened pins for repeat positioning
Media Module Faces Air, fluid, electrical, industrial Ethernet, welding current
Product Name QC-210 300kg Heavy Duty Tool Changer
Suggested Payload Range 300 kg
Static Locking Moment Z 2,260 Nm
Application Robot Handling Workstation
Series ATI QC heavy duty tool changer series
Static Locking Moment X-Y 2,710 Nm
Lock Status Sensors Locked / Unlocked / Ready-to-lock
Brand Name ATI
Place of Origin United States
Model Number QC-210
Certification ISO 9001:2015

View Detail Information

Inquiry by Email Get Latest Price
Chat online Now Ask for best deal
  1. Product Details
  2. Company Details

Product Specification

Air Ports 5 x 3/8 NPT + 4 x 1/2 NPT Locating Pins Hardened pins for repeat positioning
Media Module Faces Air, fluid, electrical, industrial Ethernet, welding current Product Name QC-210 300kg Heavy Duty Tool Changer
Suggested Payload Range 300 kg Static Locking Moment Z 2,260 Nm
Application Robot Handling Workstation Series ATI QC heavy duty tool changer series
Static Locking Moment X-Y 2,710 Nm Lock Status Sensors Locked / Unlocked / Ready-to-lock
Brand Name ATI Place of Origin United States
Model Number QC-210 Certification ISO 9001:2015
High Light 300kg Heavy Duty Tool Changer ,2710Nm Static Locking Moment ,QC-210 Handling Workstation Changer

Overview

The QC-210 is a heavy duty tool changer built around the strongest locking mechanism in the ATI range, rated for 300 kg payloads with 2,710 Nm static moment in X and Y and 2,260 Nm in Z. It is the tool changer to specify when a material handling workstation has to move a large gripper, a vacuum frame or a fixture that is heavy and long at the same time.

The body of this heavy duty tool changer is reinforced where the locking cam sits, and hardened locating pins carry the shear load, so repeat positioning survives the shock of a handling cycle rather than only the static load of a catalog table. Every unit carries locked, unlocked and ready-to-lock sensors, which is what allows a handling cell to interlock on real joint state instead of a timer.

Media module faces are part of the tool changer design, not an add-on: air, fluid, electrical signals, industrial Ethernet and welding current modules all mount on the same body. For a handling workstation running Ethernet cameras and valve manifolds through the wrist, the QC-210 is the version to choose over the QC-160, because the larger body leaves room for control modules with integrated valve adapters.

Five 3/8 NPT and four 1/2 NPT air ports are built in, so a heavy duty tool changer can feed a large vacuum generator and several clamp circuits without an external manifold at the wrist. That is the practical difference between a 300 kg tool changer that fits a real cell and one that only fits a datasheet.

Technical Specifications

ModelQC-210TypeHeavy duty pneumatic tool changer
Suggested Payload Range300 kgStatic Locking Moment X-Y2,710 Nm
Static Locking Moment Z2,260 NmAir Ports5 x 3/8 NPT + 4 x 1/2 NPT
Lock SensorsLocked / Unlocked / Ready-to-lockLocatingHardened pins
Media ModulesAir, fluid, electrical, industrial Ethernet, welding currentSeriesATI QC heavy duty series

Heavy Duty Series Selection Reference

ModelSuggested PayloadStatic Moment X-YStatic Moment Z
QC-210300 kg2,710 Nm2,260 Nm
QC-310510 kg3,290 Nm3,160 Nm
QC-510700 kg4,860 Nm3,500 Nm
QC-835300 kg2,700 Nm2,260 Nm
QC-850700 kg3,500 Nm2,500 Nm
QC-12101,350 kg5,420 Nm5,420 Nm
QC-13102,990 kg11,000 Nm12,600 Nm

Why the QC-210 Sits Where It Does

  • • At 300 kg and 2,710 Nm the QC-210 heavy duty tool changer covers the gap between the 150 kg class and the 510 kg QC-310.
  • • The larger body accepts control modules with integrated valve adapters, which the standard QC-160 does not have room for.
  • • Nine air ports in two sizes let one tool changer feed a vacuum generator and several clamp circuits at once.
  • • Hardened locating pins take shear, so the locking mechanism is protected during a handling cycle with a swinging load.

Advantages

Strength With Monitoring

  • • The heavy duty tool changer reports locked, unlocked and ready-to-lock states, so the cell interlocks on the joint rather than on elapsed time.
  • • 2,710 Nm X-Y and 2,260 Nm Z are static ratings; dynamic capacity is higher, so a handling cycle with acceleration still has margin.
  • • Sensors sit inside the tool changer body, where spatter, dust and coolant cannot reach them.

Media Without Compromise

  • • Industrial Ethernet modules let a camera or a smart gripper run through the tool changer instead of a separate dress pack.
  • • Fluid and electrical modules mount on the same faces, so a handling workstation can pass hydraulic clamping and sensor power together.
  • • Because modules are added to the tool changer rather than replacing it, the interface grows with the cell.

Designed for Real Handling Loads

  • • A 300 kg tool changer sees shock loads every cycle, and the reinforced body is designed for that duty rather than for a static test.
  • • The locating pins and the locking cam are separate load paths, so a mis-seated tool cannot rely on the cam alone.
  • • Tool plates and stands are part of the same system, so a heavy duty tool changer has a documented docking arrangement.

Applications

  • • Material handling workstations moving 300 kg grippers and vacuum frames.
  • • Palletizing cells that swap between a layer gripper and a single-product tool.
  • • Machine tending with a heavy duty tool changer carrying a large jaw gripper.
  • • Foundry and forging lines where the tool changer must survive heat and shock loading.
  • • Assembly stations that pass industrial Ethernet for camera and torque data through the wrist.
  • • Press tending installations with a heavy end effector and a long moment arm.

FAQ

Q1. What can the QC-210 heavy duty tool changer carry?
The suggested payload range is 300 kg, with 2,710 Nm static locking moment in X-Y and 2,260 Nm in Z. Dynamic ratings sit above the static figures, and we size the tool changer against your acceleration profile.

Q2. What is the difference from the QC-160?
Both are 300 kg class, but the QC-210 heavy duty tool changer has a larger body that accepts control modules with integrated valve adapters, which is why ATI recommends the QC-210 when media modules are required.

Q3. How many air circuits does the tool changer have?
Five 3/8 NPT and four 1/2 NPT ports are built into the QC-210, enough for a vacuum generator plus several clamp circuits without an external manifold.

Q4. Can it pass Ethernet through the wrist?
Yes. Industrial Ethernet modules mount on the standard media faces of the tool changer, so a camera or smart gripper can keep its network link after a tool change.

Q5. How is the joint state verified?
Locked, unlocked and ready-to-lock sensors are integrated in the tool changer and read by the robot controller, so the handling program cannot move with an unconfirmed joint.

Q6. Should I move up to the QC-310?
If the payload goes beyond roughly 300 kg, or if the moment arm grows, the QC-310 raises the rating to 510 kg and 3,290 Nm. We quote both when a handling tool sits near the limit.

Q7. What else belongs in the system?
A heavy duty tool changer needs matching tool plates and stands. ATI supplies floating hangers, dust caps and custom bases, and we include the docking set in the quotation.

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer,Distributor/Wholesaler,Exporter

  • Year Established:

    2013

  • Total Annual:

    50 Million -100 Million

  • Employee Number:

    150~200

  • Ecer Certification:

    Verified Supplier

Company Description  Turnkey Robotic Automation Integrator: Dr. Industrial Robotic Technology Ltd. (CNGBS) is a global one-stop intelligent manufacturing service provider, specializing in industrial robotics, standard automation workstations, and digital factory EPC solutions. Tier-1 Brand ... Company Description  Turnkey Robotic Automation Integrator: Dr. Industrial Robotic Technology Ltd. (CNGBS) is a global one-stop intelligent manufacturing service provider, specializing in industrial robotics, standard automation workstations, and digital factory EPC solutions. Tier-1 Brand ...

+ Read More

Get in touch with us

  • Reach Us
  • Dr.Industrial Robotic Technology Ltd
  • 6 building,No 98, Fulian 1 road,Baoshan district, Shanghai, China.
  • https://www.robotsarms.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement