1500kg Payload Semi Enclosed Sheet Metal 7th Axis Robot Linear Track

Product Specification

1500kg Payload Semi Enclosed Sheet Metal 7th Axis Robot Linear Track

Product Overview & Industry Challenge

• A semi enclosed 7th axis turns a fixed robot arm into a full-line material handler without rebuilding the cell floor or relocating services.

• The 1500kg payload semi enclosed 7th axis robot linear track carries heavy weldments along a customizable travel length, so a single arm reaches several workstations instead of only one.

• Its semi enclosed steel cover shields the belt drive and hardened rail from welding spatter, grinding dust and shop grit on busy fabrication lines.

• Repeat positioning of ±0.05mm keeps seam tracking and pallet placement consistent across the entire travel, however long the track is built.

• Built for sheet metal fabrication, this 1500kg robot linear axis targets the real bottleneck in heavy cells, which is horizontal reach rather than payload.

• Because the drive and rail are covered, the semi enclosed 7th axis robot linear track keeps its accuracy in environments where an open rail would quickly foul.

• The unit is delivered as an external axis of the robot, so it runs coordinated motion straight from the robot program with no separate controller to synchronise.

Key Technical Specifications

Core Engineering Advantages

• Rigid machined rail: a stress-relieved, machined steel guide stays flat and parallel over long travel, protecting ±0.05mm accuracy at the far end of the axis.
• Semi enclosed protection: the covered structure shields the drive against welding spatter and shop dust, extending service life between overhauls on harsh lines.
• High-torque belt drive: a 1:10 deceleration ratio delivers smooth 100–1000mm/s motion and 1000mm/s² acceleration while carrying 1500kg loads.
• Cable and lubrication management: a routed drag chain plus centralised lubrication cut downtime and keep the semi enclosed 7th axis robot linear track running shift after shift.
• Documented accuracy: every unit is cycled against ISO 9283 principles and rechecked at commissioning, so ±0.05mm is verified rather than merely claimed.
• Sealed structure: the semi enclosure rating is matched to the application, and IP-rated covers are available for heavy-spatter welding zones.

Target Industrial Applications

• Welding workstations: tracks the torch along large fabrications, holding a 1500kg part steady while the robot follows the seam.
• Palletizing and depalletizing: moves heavy cases and pallets between conveyor ends and stacked pallets on high-cycle packaging lines.
• Sheet metal fabrication: feeds presses and transfer stations, cutting the number of robots and the load/unload time needed per line.
• Machine tending: lets one semi enclosed 7th axis robot linear track serve several machines, so a single robot covers a full production cell.
• Heavy handling: positions large weldments and fixtures with repeatable ±0.05mm motion for consistent downstream processing.

Procurement & Engineering FAQ

Q: How is ±0.05mm repeat positioning verified before shipment?

A: Each axis is cycled with an ISO 9283-based test and rechecked at commissioning using the origin mark and dual-side scale, so the buyer receives documented accuracy.

Q: Will the semi enclosed 7th axis survive a dusty welding cell?

A: Yes — the semi enclosed structure shields the drive from spatter and dust, and IP-rated covers are available for heavy-spatter welding zones.

Q: Can this 1500kg robot linear axis integrate with our existing robot and tooling?

A: Yes — the rail runs as an external axis of the robot with coordinated motion, and payload, reach within 2000mm and tooling are confirmed during configuration.

For fabrication and palletizing cells that need more reach, the 1500kg payload semi enclosed 7th axis robot linear track keeps one arm productive across the entire floor.