CRX-10iA 10kg Payload 1249mm Reach ±0.04mm IP67 Grinding & Polishing Robot

Product Specification

FANUC CRX-10iA Collaborative Grinding & Polishing Robot

The FANUC CRX-10iA is a six-axis collaborative robot engineered for grinding, polishing and other surface finishing work where a lightweight, easy-to-deploy arm must work safely alongside operators. It carries a 10 kg payload across a 1249 mm reach and holds a repeatability of ±0.04 mm (ISO 9283), so this grinding and polishing robot keeps consistent pressure and position on curved and complicated surfaces. A slim, smooth body and a compact R-30iB Mini Plus controller let a small team install the cell without lifting equipment.

Safety and ease of use are built in. The CRX series stops safely upon light contact with a person and is certified to meet the requirements of ISO 10218-1, so it can share space with operators during manual guidance. Teaching is done by hand-guiding the arm and using the intuitive tablet user interface, and third-party grippers connect easily. FANUC +RVision integrated vision and +RPickTool options support part location and pick routines, while the maintenance-free design and IP67 protection on the arm suit the dust and debris common to grinding and polishing stations. Collaborative mode runs up to 1000 mm/s and high speed mode reaches up to 2000 mm/s for fast finishing cycles.

Technical Parameters

Key Advantages

• Collaborative safety: stops safely upon light contact and is certified to ISO 10218-1 for shared workspaces.
• Finishing precision: ±0.04 mm repeatability keeps grinding and polishing consistent on complex surfaces.
• Light and easy to deploy: a 40 kg arm with a compact controller installs without lifting equipment.
• Intuitive teaching: hand-guided teaching and a tablet interface shorten programming time.
• Dust protection: IP67 protection on the arm suits debris-heavy grinding and polishing cells.
• Maintenance-free: a high-reliability design reduces downtime and upkeep.

Application Fields

• Robotic grinding and deburring of metal and cast parts
• Surface polishing and buffing of curved and complex shapes
• Sanding and edge chamfering in a grinding and polishing workstation
• Consistent finishing of small to medium batches with quick changeover
• Load and unload support and 3D visual tracking for finishing lines

Frequently Asked Questions

Q: What payload and reach does the CRX-10iA offer?
A: This grinding and polishing robot provides a 10 kg payload with a 1249 mm reach, enough to carry finishing tools and workpieces while covering a compact finishing cell.

Q: How accurate is it for grinding and polishing?
A: Repeatability is ±0.04 mm (ISO 9283), so the arm keeps consistent tool pressure and position across curved and complicated surfaces.

Q: Is it safe to work next to operators?
A: Yes. The CRX-10iA stops safely on light contact and is certified to ISO 10218-1, allowing it to share space with operators during hand-guided teaching and production.

Q: Can it handle a dusty grinding environment?
A: The robot carries an IP67 protection rating and a maintenance-free design, so it tolerates the dust and debris typical of grinding and polishing stations.

Q: How is it controlled and integrated?
A: It runs on the compact R-30iB Mini Plus controller with a tablet user interface, and supports third-party grippers plus +RVision integrated vision and +RPickTool options for part location.

For flexible surface finishing, the FANUC CRX-10iA combines a 10 kg payload, a 1249 mm reach and ±0.04 mm repeatability in a 40 kg collaborative arm. With ISO 10218-1 safety, IP67 protection, intuitive hand-guided teaching and the compact R-30iB Mini Plus controller, it is a practical grinding and polishing robot for deburring, sanding and buffing. Share your part geometry, tooling and finish target, and we will confirm the right configuration for your grinding and polishing workstation.