JIMA Copper
| Payment Terms | T/T, L/C |
| Supply Ability | 1000 Ton per month |
| Delivery Time | 5-15 days |
| Packaging Details | wooden carton |
| Purity | 99.95% |
| Pinholes | None |
| Anti oxidation | 180 degree 60 minutes, 180 days 23 degree |
| Thickness | 1/2 oz,3/4 oz,1 oz,2 oz, |
| Color | red or black |
| Elongation | ≥ 1.5% |
| Tensile strength | ≥ 160 MPa |
| Peel strength | ≥ 1 N/mm |
| Foil profile | RA≤0.15μm，Rz≤1.7μm |
| Application: | FCCL,FPC |
| Length Per Roll | 500 - 5000 Meter |
| Inter Diameter | 76 Mm，152 Mm， 3 Inch，6 Inch |
| Brand Name | JIMA |
| Model Number | EDCU-HC |
| Certification | SGS, ISO,Reach, RoHS |
| Place of Origin | china |
View Detail Information
Explore similar products
Low Profile Electrolytic Copper Foil Black Treatment 105um 70um 50um 35um 25um
99.8% Purity 35um Hvlp Copper Foil for FCCL / FPC Application
0.025mm Thick ED Copper Foil , Copper Foil 25 micron
3 / 4 OZ Rolled Copper Foil , Copper Foil Paper For IC Package Substrates
Product Specification
| Payment Terms | T/T, L/C | Supply Ability | 1000 Ton per month |
| Delivery Time | 5-15 days | Packaging Details | wooden carton |
| Purity | 99.95% | Pinholes | None |
| Anti oxidation | 180 degree 60 minutes, 180 days 23 degree | Thickness | 1/2 oz,3/4 oz,1 oz,2 oz, |
| Color | red or black | Elongation | ≥ 1.5% |
| Tensile strength | ≥ 160 MPa | Peel strength | ≥ 1 N/mm |
| Foil profile | RA≤0.15μm，Rz≤1.7μm | Application: | FCCL,FPC |
| Length Per Roll | 500 - 5000 Meter | Inter Diameter | 76 Mm，152 Mm， 3 Inch，6 Inch |
| Brand Name | JIMA | Model Number | EDCU-HC |
| Certification | SGS, ISO,Reach, RoHS | Place of Origin | china |
| High Light | copper foil paper ，hvlp copper foil | ||
1oz ED electrolytic High ductility copper foil
Their characteristics differ, and an understanding of these differences is important to ensure the correct selection of copper foil for each application or environmental condition.
Thickness: 1OZ
Width: 1380 mm
Length: 500-5000 M
ID: 76 mm,152 mm
Purity:99.8%
Manufacturing Process:
In an electrodeposited copper manufacturing process, the copper foil is deposited on a titanium rotating drum from a copper solution where it is connected to a DC voltage source. The cathode is attached to the drum and the anode is submerged in the copper electrolyte solution. When an electric field is applied, copper is deposited on the drum as it rotates at a very slow pace. The copper surface on the drum side is smooth while the opposite side is rough. The slower the drum speed, the thicker the copper gets and vice versa. The copper is attracted and accumulated on the cathode surface of the titanium drum. The
matte and drum side of the copper foil go through different treatment cycles so that the copper could be suitable for PCB fabrication. The treatments enhance adhesion between the copper and dielectric interlayer during copper clad lamination process. Another advantage of the treatments is to act as anti-tarnish agents by slowing down oxidation of copper.
Application:
.Epoxy board
Difference between CA copper foil and ED copper foil
| Property | Electrodeposited | Rolled | |||||
| 8um | 18um | 35um | 70um | 18um | 35um | 70um | |
| Tensile strength,kpsi | 15 | 33 | 40 | 40 | 20 | 22 | 28 |
| Elongation,% | 2 | 2 | 3 | 3 | 8 | 13 | 27 |
|
Vol resistivity Mohm.cm |
1.66 | 1.62 | 1.62 | 1.78 | 1.74 | 1.74 | |
FAQ:
Q1. Can we come to China visit factory ?
Yes ,you can .
Q2. Can you cut into small size?
Yes, we can.
Q3. Is the copper foil Floating in box?
Yes, it is .
Typical properties of high ductility copper foil
|
Classification
|
Unit | Requirement | Test Method | |||||||||||
| Foil Designation | / | T | H | M | 1 | 2 | 3 | IPC-4562A | ||||||
| Nominal thickness | / | 12um | 1/2 OZ | 3/4 OZ |
1 OZ |
2 OZ |
3 OZ |
IPC-4562A | ||||||
| Area Weight | g/㎡ | 107±4 | 153±5 | 228±8 | 285±10 | 580±15 | 860±20 |
IPC-TM-650 2.2.12.2 |
||||||
| Purity | ％ | ≥99.8 |
IPC-TM-650 2.3.15 |
|||||||||||
| Foil Profile | Shiny side (Ra) | սm | ≤0.4 | ≤0.4 | ≤0.4 | ≤0.4 | ≤0.4 | ≤0.4 |
IPC-TM-650 2.3.17 |
|||||
| Matte side(Rz) | um | ≤6 | ≤8 | ≤10 | ≤10 | ≤15 | ≤20 | |||||||
| Tensile Strength |
R.T.(23℃)
|
Mpa | ≥150 | ≥150 | ≥235 | ≥280 | ≥280 | ≥280 |
IPC-TM-650 2.3.18 |
|||||
| Elongation |
R.T.(23℃)
|
％ | ≥5 | ≥5 | ≥10 | ≥10 | ≥15 | ≥15 |
IPC-TM-650 2.3.18 |
|||||
| Subject | Ω.g/㎡ | ≤0.170 | ≤0.166 | ≤0.162 | ≤0.162 | ≤0.162 | ≤0.162 |
IPC-TM-650 2.5.14 |
||||||
| Peel Strength(FR-4) | N/mm | ≥1.0 | ≥1.3 | ≥1.6 | ≥1.6 | ≥2.1 | ≥2.1 |
IPC-TM-650 2.4.8 |
||||||
| Pinholes&porosity | Number | No |
IPC-TM-650 2.1.2 |
|||||||||||
| Anti-oxidization | R.T.(23℃) | day | 180 | / | ||||||||||
| H.T.(200℃) | Minutes | 60 | / | |||||||||||
3. Standard Width,1380(±1)mm,May according to the customer request tailor.
We test the peel strength with FR-4(Tg140) prepreg ,please reconfirm with your pp.
Company Details
Business Type:
Manufacturer
Year Established:
2010
Total Annual:
20000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Jima Copper is a professional supplier of high-precision copper and copper alloy series of foil roll brand. Jima provided 4-800μm thick copper foil, Maximum width 1580 mm, Jima copper foil production capacity is sufficient, with complete varieties, excellent quality. Jima s... Jima Copper is a professional supplier of high-precision copper and copper alloy series of foil roll brand. Jima provided 4-800μm thick copper foil, Maximum width 1580 mm, Jima copper foil production capacity is sufficient, with complete varieties, excellent quality. Jima s...
Get in touch with us
Leave a Message, we will call you back quickly!