Shenzhen Bebaios Machinery Co., Ltd
| Discharge Pressure | 8 Bar |
| Delivery Time | 1week |
| Oil Flow Rate | 114.0 L/min |
| Specific Power | 6.46 KW |
| Oil Heat Load | 65.6 kW |
| Shaft Power | 80.6 KW |
| Mass Flow Rate | 14.88 kg/min |
| Payment Terms | TT; Western Union; Alipay |
| Supply Ability | 6000unit/month |
| Free Air Delivery | 12.47 m3/min |
| Packaging Details | Wooden |
| Drive Speed | 3000 RPM |
| Brand Name | Bebaios |
View Detail Information
Explore similar products
Screw Air End 3.67 m3/min Volumetric Flow 3000 RPM Rotation Speed 8 Bar Exhaust
High-Efficiency 3000 RPM Screw Air End 8 Bar Discharge Pressure 2.73 m3/min Free
ABD Series High Efficiency Screw Air End 3000 rpm 4.65 m³/min Volumetric Flow 26
3000 RPM 8 Bar Discharge Pressure 3.5 m3/min Free Air Delivery Screw Air End
Product Specification
| Discharge Pressure | 8 Bar | Delivery Time | 1week |
| Oil Flow Rate | 114.0 L/min | Specific Power | 6.46 KW |
| Oil Heat Load | 65.6 kW | Shaft Power | 80.6 KW |
| Mass Flow Rate | 14.88 kg/min | Payment Terms | TT; Western Union; Alipay |
| Supply Ability | 6000unit/month | Free Air Delivery | 12.47 m3/min |
| Packaging Details | Wooden | Drive Speed | 3000 RPM |
| Brand Name | Bebaios | ||
| High Light | 3000 RPM Screw Compressor Air End ，High Efficiency Oil-Injected Compressor Body ，Easy Maintenance Single-Stage Air End | ||
Different industrial environments combine extreme ambient heat, airborne dust, and continuous operation demands. A compressor body must resist thermal degradation, maintain volumetric efficiency under high intake temperatures, and allow fast on‑site service without cleanroom conditions. Hanbell’s single‑stage oil‑injected screw compressor body meets these challenges. The ground 5:6 asymmetric rotor profile minimizes internal leakage even when discharge temperatures rise, preserving high efficiency where other designs lose specific power. The oil‑injected circuit simultaneously seals, cools, and lubricates, preventing dust ingress into rotor clearances and keeping thermal stress within design limits. For maintenance, the cast iron housing uses a split end cover and a dedicated oil separator access port. Technicians can inspect rotors or replace the separator without full disassembly – critical when service occurs in high‑temperature, dusty field conditions. Rated for 50,000 hours under nominal loads, this compressor body gives Middle East customers consistent energy savings and reduced downtime, even when the thermometer passes 45°C.
| Parameters | Technical Value |
|---|---|
| Model | AB-830 |
| Drive Speed (RPM) | 3000 |
| Discharge Pressure (Bar) | 8 |
| Free Air Delivery(m3/min) | 12.47 |
| Free Air Delivery (@s.t.p)(Nm3/min) | 11.62 |
| Mass Flow Rate(kg/min) | 14.88 |
| Shaft Power(KW) | 80.6 |
| Specific Power(KW) | 6.46 |
| Oil Flow Rate(L/min) | 114.0 |
| Oil Heat Load (kW) | 65.6 |
| Dew Point Temperature(°C) | 71.9 |
| Recommended Oil Viscosity | 46 |
Long service life, good stability,
High application pressure and has been used in the market for more than 15 years.
Good reputation and is benchmarked against the international brand head
As a national high-tech enterprise, Bebaios Compressor, with a global reach, is committed to in-depth R&D and full-chain manufacturing in the field of energy-saving air compressors. Our product portfolio covers a full range of models, including screw compressors, permanent magnet variable frequency compressors, reciprocating piston compressors, and scroll compressors, and we also provide matching refrigerated dryers and post-processing equipment, customizing efficient and practical air system solutions for our customers.
We offer more than just equipment; we provide support. Leveraging our nationwide service network and 24/7 technical support, we promise a rapid response within 30 minutes. With our self-developed ERP system enabling precise data traceability for every machine, and on-site supervision by experienced engineers, Bebaios ensures uninterrupted production power, allowing you to focus on core business growth without worry.
A:Depending on the production cycle, completion is expected within 2-3 days.
A:12 months.
A:1 set.
A:Approximately 6,000 units per month. Thank you.
A:Yes, we are also actively seeking agents in various countries.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
1996
Total Annual:
1,000,000-10,000,000
Employee Number:
450~500
Ecer Certification：
Verified Supplier
.gtr-container-compinfo789 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 20px; max-width: 100%; box-sizing: border-box; overflow-wrap: break-word; word-wrap: break-word; } .gtr-container-compinfo789-... .gtr-container-compinfo789 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 20px; max-width: 100%; box-sizing: border-box; overflow-wrap: break-word; word-wrap: break-word; } .gtr-container-compinfo789-...
Get in touch with us
Leave a Message, we will call you back quickly!