1.5 T Reverse Osmosis Pure Water Treatment Equipment for Environmental

Product Specification

1.5 T Reverse Osmosis Pure Water Treatment Equipment for Environmental Protection

Description

RO water treatment system, also known as reverse osmosis water treatment system, is a membrane separation technology developed in the sixties, the principle is that the raw water under high pressure through the reverse osmosis membrane, the solvents in the water from the high concentration to the low concentration of diffusion so as to achieve the separation, purification, concentration of the purpose, because it is in the opposite direction of the natural world of osmosis, and therefore called it reverse osmosis. Reverse osmosis water treatment system can remove bacteria, viruses, colloids, organic matter and more than 98% of dissolved salts in water. The method is characterized by low operating costs, simple operation, high degree of automation and stable effluent water quality. It has obvious advantages over other traditional water treatment methods and is widely used in water treatment related industries.

Parameter Table

Key  Adavantage

(1) Pressure is the main force of the RO separation process, which does not undergo the phase change of energy-intensive exchange, and has low energy consumption

(2) RO does not require a large number of precipitants and adsorbents, low operating costs;

(3) RO separation project design and operation is simple, short construction period;

(4) RO has high purification efficiency and is environmentally friendly. Therefore, RO technology has been widely used in life and industrial water treatment, such as seawater and brackish water desalination, medical and industrial water production, pure water and ultrapure water preparation, industrial wastewater treatment, food processing concentration, gas separation and so on. 

Maintenance

Must strictly control the quality of water intake to ensure that the equipment in line with the water intake target (target aim) requirements of the water quality conditions of operation (Windows). Should be produced to meet the quality and quantity of water under the premise of taking the lowest possible pressure value, which is conducive to reducing the membrane of the water flux attenuation (attenuation), thereby reducing the replacement rate of the membrane. Control (control) emissions. Ultrapure water purifier is the use of pretreatment, reverse osmosis technology, ultra-purification treatment and post-processing methods, the conductive medium in the water is almost completely removed, but also the water is not dissociated from the colloidal substances, gases and organic matter are removed to a very low degree of water treatment equipment. Due to hydrology and operating pressure (pressure) and other factors (factor) changes, the device (device) of the water yield will also change accordingly, this time the emissions should be adjusted, otherwise it will affect the desalination rate of the device. Reverse osmosis equipment (shèbèi) device each shutdown and startup are required to let the device in less than 0.4MPA water pressure (especially: pressure) force (pressure) under the condition of flushing for 10 minutes.

Product  Display