PLC Control Rubber Kneader Machine For Plasticizing Mixing Rubber

• CE, ISO9001: 2008 certification
• PLC control, high production efficiency
• Low noise, high safety and convenient
• Competitive price
• Trustworthy manufacturer

This Rubber Kneading Machine is mainly used for plasticizing and mixing of natural rubber, synthetic rubber, reclaimed rubber and plastics, foaming plastics, and used in mixing of various the degree materials.

1. Mixing Chamber It consists of a "w" shape body and two side boards made of high quality steel plates by means of extrusion forming and welding, which are jacked to take the flow of cooling water or steam. It is plated with hard chrome on its internal walls.
2. Regular Note Pump Timing injection pump to the sealing system on a regular injection of hydraulic oil, lubrication sealing effect.
3. Thermal Resistance (or thermal couple) There is a plug-in thermal resistance or thermal couple in middle section of the bottom of the chamber to be connected to electrical system to inspect and control the mixing temperature.
4. Rotor It is designed to the hollow blades of banbury type. The hollows are connected with axial hole of rotor shaft used as cooling or heating passage. The top edges and the side faces of blades are surface welded with hard alloy and ground, then plated with hard chrome and polished.
5. Cooling/heating System A common piping system is adopted for either cooling or heating material in mixing operation. Through the system cooling water or steam is fed in three ways to the cavities of the rotors blades, - the jackets of the mixing chamber and the top ram.
6. Tilting Mechanism It consists of a rotor with brake, cycloidal gear reducer, TP type worm and worm gear, etc. It is able to actuate the mixing chamber tilting by 140° Around the front rotors.
7. Dust Stop Device At the joint between the top of mixing chamber and the cantilevered arm of the machine frame, the dust sealing assembled with curved slotted partings are used for obtaining an excellent and reliable sealing purpose. The end face of the rotor is sealed by end contact sealing with non oil-lubrication and it seals well and is wear-resistance and durable.
8. Main Driving System The part is made up with main motor, reducer, connecting gears. It realizes odd-speed rotation of rotors with running face one other.
9. Pneumatic control system Pneumatic control system is controlled by PLC order. A bi-directional air cylinder makes the ram up or down. In case of the over load occurs when mixing chamber, the top ram can be raised automatically or manually if necessary, so as to protect motor from overloading.
10. Electrical Control System Imported PLC device and electric control components which are all imported products or imported technology products are adopted in the electric control system as to raise control reliability.
11. Dust Sealing Device Mixing chamber catchy interface rack cantilever the oil dust seals and timing effect oiling dust, unique structure, the use of copper materials, good sealing performance, no leakage of the glue, powder leakage, do not pollute the environment, but also has easy maintenance and long service life.

Reference photos

• 1. What does your factory do regarding quality control? We pay much more importance to quality control from the very beginning to the end of production. Every machine will be fully assembled and carefully tested before shipment.
• 2. What's the machine quality guarantee? Quality guarantee time is one year.We choose world famous brand components to keep our machine in perfect working condition.
• 3. Are you able to give installation and commissioning overseas?How long time will it take? Yes, we can supply overseas service and technical support but customer needs to pay for the cost of the installation. Small machine usually takes within 2~3 days. Big production line usually takes about 30 days.
• 4. How can I trust you to deliver the right machine as I ordered? We will absolutely deliver a good quality machine as we discussed and confirmed in the order. The core of our company culture is innovation,quality,integrity and efficiency. Also we have had many good cooperation with world famous rubber production manufacturers. If you come to our factory, we can show the user around us.
• 5. How can we go to your side? We are located in Qingdao City, Shandong province, China. The name of airport is Qingdao liuting airport. We will pick up you at the airport.

• Our engineers can design target machines for customers and send them the drawing to confirm. We are always on the side of saving your cost.
• In the process of production, we will take photos and send to customers for their track the progress.
• Documents such as packing list, commercial invoice, and bill of lading etc. will be sent after the delivery.
• We could supply free English foundation DWG, installation drawing, user guide, maintenance manual and part drawing.
• We supply overseas engineer service and help to train your workers to operate the machine.

Ayla

Welcome to our factory!