Dongguan Chengfeng Testing Equipment Co., Ltd
| Payment Terms | T/T,Cash,L/C, D/A, D/P, Western Union, MoneyGram |
| Supply Ability | 5 units per month |
| Delivery Time | 10 Work Days |
| Packaging Details | Wooden cases |
| Inside dimensions | W500 * H500 * D400mm |
| Dimensions | W780 * H1600 * D1450mm (Based on actual delivery dimensions) |
| Power supply requirements | AC220V±10%V，50±1Hz，Single phase three wire |
| Maximum installed power | 4KW、5.5KW |
| Temperature range | RT (room temperature+15 ℃)~+150 ℃ (without compressor)、 -40 ℃ to+150 ℃ |
| Temperature resolution | 0.01℃ |
| Temperature fluctuations | ±0.5℃ |
| Humidity fluctuations | ±2.0%RH |
| Humidity deviation | ±3.0%RH |
| Brand Name | CHENGFENG |
| Model Number | CF8468 |
| Certification | ISO,CE |
| Place of Origin | China |
View Detail Information
Explore similar products
UV Ultraviolet Accelerated Aging Chamber Using Fluorescent Ultraviolet Lamps To
Sulfur Dioxide Test Chamber Reference Standard: GB/T9789-2008 Test For Sulfur
Thermal Shock Testing Machine Is Used In Industries Such As Electronics, Auto
Material Smoke Toxicity Test Device (Squirrel Cage Method) It Is Mainly
Product Specification
| Payment Terms | T/T,Cash,L/C, D/A, D/P, Western Union, MoneyGram | Supply Ability | 5 units per month |
| Delivery Time | 10 Work Days | Packaging Details | Wooden cases |
| Inside dimensions | W500 * H500 * D400mm | Dimensions | W780 * H1600 * D1450mm (Based on actual delivery dimensions) |
| Power supply requirements | AC220V±10%V，50±1Hz，Single phase three wire | Maximum installed power | 4KW、5.5KW |
| Temperature range | RT (room temperature+15 ℃)~+150 ℃ (without compressor)、 -40 ℃ to+150 ℃ | Temperature resolution | 0.01℃ |
| Temperature fluctuations | ±0.5℃ | Humidity fluctuations | ±2.0%RH |
| Humidity deviation | ±3.0%RH | Brand Name | CHENGFENG |
| Model Number | CF8468 | Certification | ISO,CE |
| Place of Origin | China | ||
| High Light | high low temperature test chamber ，humidity heat test chamber ，environmental test chamber with warranty | ||
Product application
This equipment is used to expose the product to a closed and constant temperature (such as high temperature, low temperature)/temperature and humidity (such as constant damp heat, alternating damp heat) environment, and verify the parameter changes or other physical property changes of the product after a period of environmental stress test. It is applicable to "environmental simulation" experiments for research and development and quality control in scientific research fields such as electrical engineering, electronics, electrical appliances, LED, optoelectronics, semiconductors, new energy, automobiles, components, medical devices, aerospace materials, etc.
Standards
Test A of GB/T2423.1-2008 (IEC68-2-1) : Low-temperature Test Method
Test B of GB/T2423.2-2008 (IEC68-2-2) : High-temperature Test Method
GB/T2423.3-2006 (IEC68-2-78) Test Ca: Constant Damp Heat Test
GB/T2423.4-2008 (IEC68-2-30) Test Db: Alternating Wet Heat Test
Precautions
The acceptance of the above-mentioned performance indicators refers to the measurement obtained under the no-load condition of the test chamber, when the temperature remains constant and the ambient temperature is ≤+28℃. If it exceeds this range, it will affect the cooling performance or cause the machine to stop and alarm.
Environmental conditions:
1.Ambient temperature: +5 to +28℃ (Optimal performance is guaranteed at +10 to +28℃, and normal operation can be maintained at +5 to +30℃)
2.Relative humidity: ≤85%RH
3.Ambient atmospheric pressure: 80KPa to 106Kpa
4.Wet steam, little dust, no direct sunlight or direct radiation from other heat sources.
5.There is no strong air convection, strong electromagnetic field influence or powerful vibration around.
6.The floor surface is relatively level and the drainage holes do not exceed the horizontal height of the floor surface.
Please do not put the following substances that may explode, are flammable or corrosive into the equipment test area. Excessive exposure of these substances to heat may cause fire or explosion. It is strictly prohibited to put the following items into the test chamber for testing:
Explosive: such as nitrates, other explosive nitric acid substances, explosive nitro compounds, and explosive organic peroxides
Corrosiveness: Corrosive substances, oxides, chlorides, nitrates, etc
Flammability: Active metals (lithium, sodium, potassium, etc.)
Flammability: gasoline, kerosene, methanol, xylene, etc
Flammable gases: hydrogen, alkynes, alkanes, etc
Company Details
Business Type:
Manufacturer
Year Established:
2004
Total Annual:
5000-8000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
CHENGFENG is a professional manufacturer of Building materials/ Wire/ Plastics/ Rubber Fire retardant testing equipment 1. Fire Testing Equipment 2. Building Material Fire Tester 3. Wire and Cable Fire Tester 4. Environmental Test Chamber 5. Textile Testing Equipment 6. Plastic T... CHENGFENG is a professional manufacturer of Building materials/ Wire/ Plastics/ Rubber Fire retardant testing equipment 1. Fire Testing Equipment 2. Building Material Fire Tester 3. Wire and Cable Fire Tester 4. Environmental Test Chamber 5. Textile Testing Equipment 6. Plastic T...
Get in touch with us
Leave a Message, we will call you back quickly!