IEC60587 High Voltage Track and Erosion test Equipment

IEC60587 High voltage track and errosion test equipment

1.Scope of application:

 Mainly suitable for testing the resistance of electrical and electronic products, household appliances, and their materials to electrical trace and corrosion, simulating the use of liquid pollutants and inclined surface specimens at power frequency (48Hz -62Hz). Evaluate the resistance level of electrical insulation materials used under harsh environmental conditions through the measurement of resistance to electrification and corrosion..Under the influence of moisture and impurities in electrical products, insulation leakage may occur between charged parts of different polarities or between charged parts and grounded metal. The resulting arc can cause breakdown, short circuit, or material erosion due to discharge, and even lead to fire. This tester is a destructive test that simulates the above situation on insulation materials, used to measure and evaluate the relative resistance to leakage and marking of insulators under the action of an electric field and impurity containing water at a specified voltage. It is suitable for solid electrical insulation materials and their products in electrical and electronic products, household appliances, such as relay sockets, conversion switch covers, contactors, etc.

2.Compliant with standards:

According to the requirements of GB/T6553-2014/IEC60587-1984 "Test Method for Evaluating the Resistance of Electrical Insulation Materials to Tracing and Corrosion under Severe Environmental Conditions" and DL/T810-2002 "Technical Conditions for ± 500kV DC Rod Suspension Composite Insulators", the simulation test items specified in the standard for AC/DC Leakage Tracing Test of Insulation Materials, applicable to rubber, plastic and other electrical insulation materials such as inclined plane method. Standard for five sets of silicone rubber testers and silicone testers.

3.Technical parameters:

Performance Index:
a. Instrument Dimensions: 1500L*1050W*2000H (mm);
b. Operationg Room Size: 1100L*900W*950H (mm);
c. Electrode: thickness: 0.5mm; material: stainless steel;
d. Gape of Electrade: 50.0mm±0.1;
e. Testing Voltage: AC: 0V-6000V no rate adjustable;
DC: 0V-8400V no rate adjustable;
f. Testing Voltage power: 6000W;
g. Liquid Flow Range: 0.0016-1.5ml/min optional setting;
h. Dropping liquid Precision: 0.5%;
i. Stop droping liquid and turn off the Voltage Output if the loop current is more than 60mA;
g. Testing time: 0-10 hours, setting freely;

4.Packaging & Shipping

FAQ

1. How to choose the most suitable Mechanical Equipment ?

 Our professional team will give you the best suggestion as long as you tell us what kind of test you need to do andthe required specification.
2. What’s the delivery term?
 At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15~20 working days after deposit receipt. If you are in urgent need, we can consider making special arrangement for you.
3. Do you accept customization service?
 Yes, of course, we can not only offer standard machines, but also customized machines 

according to your request. Don’t hesitate to tell us your requirement, we will try our best to meet your needs.
4. Can we visit your factory before order?
 Yes, we warmly welcome and sincerely invite you or your team to visit our factory, we will help to arrange hotel and pick up you from airport.
5. Do you have customers of our country before?

 Now our testing machines have been sold to more than 80 countries, like USA, Canada, Russia,UK, Italy, Germany, European , India, Pakistan, Philippine, Singapore, Malaysia,Thailand , Vietnam, Korea,Saudi Arabia,Brazil...and so on.
6. How about your warranty?
Generally,our warranty is two years. Within the warranty period, we can offer technique support and part parts change, necessarily, our engineers may go to your place for better service.
7. How about the packing for machine, is it safely protected during transportation?
 Our machine is packed by standard export wooden box, it won’t be damaged. We’ve delivered many testing machines abroad by sea or by air without damage.
8. What is the order process?
 Inquiry - quotation - communication - order confirming - deposit payment - production - testing and debugging - balance payment - packing - delivery - customer receiving - after service. 
9. How to install and use the product?
 The product is shipped with an operating instructions and video of English version.