Shenzhen Ruicom Technology Co.,Ltd.
| Signal Output | RS232 / RS485 / UART TTL |
| Package | PCBA Board / Standard casing / Corrosion-resistant casing |
| Application | Shipboard Application / Construction Excavator / Construction Piling / In-vehicle Applications / Mine Car Slope |
| Supply Ability | 100000 pieces/year |
| Protection level | IP67 / IP68 |
| Payment Terms | T/T |
| Installation Direction | Horizontal / Horizontal Downwards / Vertical / Vertical Leftwards / Vertical Rightwards |
| Delivery Time | 7-15days |
| Communication Protocol | Binary Protocol / MODBUS Protocol |
| Model Number | DTS |
| Brand Name | RUICOM |
| Certification | CE, RoHS |
| Place of Origin | Shenzhen, China |
View Detail Information
Explore similar products
DTS6 Dynamic Inclinometer Tilt Sensor High Shock Resistant CAN2.0A/CAN2.0B
WDS826FL Special Dual Axis Tilt Angle Sensor For Wind Turbine Tower Shaking
Dynamic Inclinometer DTS6-A1 | 4-20mA Current Output
BDS450 Bluetooth Dynamic Inclinometer Attitude Sensor For Marine
Product Specification
| Signal Output | RS232 / RS485 / UART TTL | Package | PCBA Board / Standard casing / Corrosion-resistant casing |
| Application | Shipboard Application / Construction Excavator / Construction Piling / In-vehicle Applications / Mine Car Slope | Supply Ability | 100000 pieces/year |
| Protection level | IP67 / IP68 | Payment Terms | T/T |
| Installation Direction | Horizontal / Horizontal Downwards / Vertical / Vertical Leftwards / Vertical Rightwards | Delivery Time | 7-15days |
| Communication Protocol | Binary Protocol / MODBUS Protocol | Model Number | DTS |
| Brand Name | RUICOM | Certification | CE, RoHS |
| Place of Origin | Shenzhen, China | ||
| High Light | Digital Output Dynamic Inclinometer ，DTS6 Inclinometer Tilt Sensor ，High Shock Resistant Dynamic Inclinometer | ||
Upper Computer Software Video:
DTS is a high-performance digital MEMS dynamic tilt sensor independently developed by RUICOM Technology. Designed specifically for attitude monitoring of moving vehicles, it can accurately measure three-dimensional attitude parameters such as roll, pitch, and yaw angles, and is particularly suitable for tilt detection under vibration or motion conditions.
This sensor employs a multi-axis MEMS inertial measurement unit (IMU), integrating a three-axis accelerometer and gyroscope, and incorporates an adaptive Kalman filter algorithm to ensure real-time output of high-precision attitude data even in dynamic environments. It supports multiple digital interfaces including RS485, RS232, and TTL, offering strong compatibility and facilitating system integration.
Based on a non-contact measurement principle, the product can achieve real-time attitude calculation without relying on a reference mounting surface. Its built-in high-precision analog-to-digital converter (ADC) and gyroscope compensation unit automatically correct for nonlinear errors, orthogonal coupling, temperature drift, and centrifugal acceleration effects, effectively suppressing measurement deviations caused by motion interference and significantly improving dynamic measurement accuracy, making it suitable for long-term harsh operating conditions.
As a dynamic/static dual-mode sensor, DTS has excellent electromagnetic interference (EMI) immunity and can withstand high-intensity mechanical shock and vibration. It is widely used in attitude measurement and control in harsh environments such as industrial automation, engineering machinery, and rail transportation, making it an ideal solution for industrial-grade high-reliability attitude sensing.
Technical Characteristics
❖ Dynamic accuracy ±0.1°;
❖ Static accuracy ±0.05°;
❖ RS485/232/TTL optional;
❖ Measuring range (R±180°, P±90°, Y±180°).
Application Field
★ Construction equipment leveling ★ Ship attitude monitoring
★ High-impact vibration crushing equipmen ★ Aircraft attitude control
★ Agricultural machinery monitoring and control ★ Engineering vehicle equipment monitoring and control
Performance Parameters
|
DTS |
Parameter |
|
|
Measurement Range(Initial value after power failure is 0°) |
Roll ±180°, Pitch ±90°, Azimuth ±180° |
|
|
Measurement Axis |
X-axis / Y-axis / Z-axis |
|
|
Roll and Pitch Resolution 1) |
0.01° |
|
|
Roll and Pitch Static Accuracy @25℃ |
±0.05° |
|
|
Roll and Pitch Dynamic Accuracy (rms) @25℃ |
±0.1° |
|
|
Gyroscope |
Gyroscope Range |
±300°/S |
|
Oblique Stability (10s Mean) |
8.5°/h |
|
|
Oblique Instability (allan) |
4.5°/h |
|
|
Angle Random Walk Coefficient (allan) |
0.25°/sqrt(h) |
|
|
Acceleration |
Acceleration range |
±4 / ±16(optional) |
|
Bias stability (10s mean) |
0.02mg |
|
|
Bias instability (allan) |
0.005mg |
|
|
Velocity random walk coefficient (allan) |
0.005m/s/sqrt(h) |
|
|
Zero-point temperature coefficient3)@-40～85℃ |
±0.01°/℃ |
|
|
Sensitivity temperature coefficient4)@-40～85℃ |
≤100ppm/℃ |
|
|
Power-on start-up time |
≤3.5s |
|
|
Response time |
0.01s |
|
|
Communication protocol |
RS485/RS232/TTL optional |
|
|
Electromagnetic compatibility |
According to EN61000 and GBT17626 |
|
|
Mean time between failures (MTBF) |
≥98000 hours/time |
|
|
Insulation resistance |
≥100 megaohm |
|
|
Shock resistance |
100g@11ms, triaxial (half-sine wave) |
|
|
Vibration resistance |
10grms,10～1000Hz |
|
|
Protection class |
IP67 / IP68(optional) |
|
|
Weight |
Single connector ≤165g (excluding cable) / Dual connector ≤180g (excluding cable) |
|
|
1) Resolution: The smallest angular change that the sensor can detect within its effective range, reflecting its ability to monitor minute tilt fluctuations. |
||
Electrical Parameters
|
Parameters |
Condition |
Minimum Value |
Typical Value |
Maximum Value |
Unit |
|
|
Power supply voltage |
Standard |
9 |
12 |
24 |
36 |
V |
|
|
Other voltage |
|
|
|||
|
Operating current |
No load |
|
40mA(12V) |
|
mA |
|
|
|
|
|
||||
|
Operating temperature |
|
-40 |
|
85 |
℃ |
|
|
Storage temperature |
|
-40 |
|
85 |
℃ |
|
Interface Definition
|
PIN/Thread Color |
Definition |
Description |
|
|
PIN1 / Brown |
9~36V |
Power supply positive terminal |
|
|
PIN2 / White |
RS232_RXD/TTL_RXD/485_D+ |
Signal output |
|
|
PIN3 / Blue |
RS232_TXD/TTL_TXD/485_D- |
Signal output |
|
|
PIN4 / Black |
GND |
Power supply negative terminal |
|
|
PIN5 / Gray |
PE |
Protective ground |
|
Connector pin definition diagram PCBA board wiring definition diagram
Product Dimensions
PCBA Dimension Diagram
Single panel dimensions: L39×W37×H12.2mm
Installation dimensions: L35×W28mm
Single-head (male) connector housing dimension drawing
Shell Size: L83×W47×H22.5mm
Recommended screws: 4 M5 screws
head (male and female) connector housing dimension diagram
Shell Size: L96×W47×H22.5mm
Recommended screws: 4 M5 screws
Corrosion-resistant shell size diagram
Shell Size: L95.3×W56×H24.5mm
Recommended screws: 4 M5 screws
Company Details
Business Type:
Manufacturer
Year Established:
2
Total Annual:
10000000USD-15000000
Employee Number:
100~200
Ecer Certification：
Verified Supplier
Shenzhen Ruicom Technology Limited is a professional high-tech enterprise specializing in the research, development, and production of inertial sensing products. With a strong focus on sensing technology and industrial applications, we provide reliable and high-precision sensing solutions for custom... Shenzhen Ruicom Technology Limited is a professional high-tech enterprise specializing in the research, development, and production of inertial sensing products. With a strong focus on sensing technology and industrial applications, we provide reliable and high-precision sensing solutions for custom...
Get in touch with us
Leave a Message, we will call you back quickly!