Shenzhen Ruicom Technology Co.,Ltd.
| Signal Output | RS232 / RS485 / UART TTL |
| Application | Shipboard Application / Construction Excavator / Construction Piling / In-vehicle Applications / Mine Car Slope |
| Package | PCBA Board / Standard casing / Corrosion-resistant casing |
| Supply Ability | 100000 pieces/year |
| Payment Terms | T/T |
| Communication Protocol | Binary Protocol / MODBUS Protocol |
| Delivery Time | 7-15days |
| Installation Direction | Horizontal / Horizontal Downwards / Vertical / Vertical Leftwards / Vertical Rightwards |
| Protection level | IP67 / IP68 |
| Model Number | DTS |
| Brand Name | RUICOM |
| Certification | CE, RoHS |
| Place of Origin | Shenzhen, China |
View Detail Information
Explore similar products
STS Standard Output Tilt Sensor Inclinometer RS232 / TTL / RS485 Signal Output
LTS6 CAN2.0B Output Tilt Sensor Inclinometer For Aerial Work Platform
LTS6 Current Output Angle Tilt Sensor For Construction Hoisting Equipment
LTS6 Voltage Output Angle Tilt Sensor For Agricultural Machinery
Product Specification
| Signal Output | RS232 / RS485 / UART TTL | Application | Shipboard Application / Construction Excavator / Construction Piling / In-vehicle Applications / Mine Car Slope |
| Package | PCBA Board / Standard casing / Corrosion-resistant casing | Supply Ability | 100000 pieces/year |
| Payment Terms | T/T | Communication Protocol | Binary Protocol / MODBUS Protocol |
| Delivery Time | 7-15days | Installation Direction | Horizontal / Horizontal Downwards / Vertical / Vertical Leftwards / Vertical Rightwards |
| Protection level | IP67 / IP68 | Model Number | DTS |
| Brand Name | RUICOM | Certification | CE, RoHS |
| Place of Origin | Shenzhen, China | ||
| High Light | DTS6 tilt sensor high shock resistant ，dynamic inclinometer with digital output ，tilt sensor inclinometer digital output | ||
Upper Computer Software Video:
The DTS series is a high-performance digital MEMS dynamic tilt sensor independently developed by RUICOM Technology. Tailored for dynamic vehicle attitude monitoring, it precisely captures three-dimensional attitude parameters including roll, pitch and yaw angles, and excels at tilt detection under vibrating and moving operating conditions.
Equipped with a multi-axis MEMS inertial measurement unit (IMU) that integrates a 3-axis accelerometer and 3-axis gyroscope, the sensor adopts an adaptive Kalman filtering algorithm. It stably outputs high-precision real-time attitude data even in complex dynamic scenarios. Supporting multiple digital interfaces including RS485, RS232 and TTL, it features outstanding compatibility and effortless system integration.
Adopting a non-contact measurement principle, the sensor realizes real-time attitude solving without requiring a fixed reference mounting plane. Its built-in high-resolution ADC and gyro compensation module automatically calibrate nonlinear errors, axis coupling deviation, temperature drift and centrifugal acceleration interference. This effectively eliminates motion-induced measurement drift and greatly enhances dynamic accuracy, enabling stable long-term operation in harsh industrial environments.
Supporting both static and dynamic dual-mode measurement, the DTS sensor delivers excellent EMI resistance and superior tolerance to high-intensity mechanical shock and vibration. It is widely applied to attitude monitoring and control for industrial automation, construction machinery, rail transit and other demanding scenarios, serving as an optimal high-reliability attitude sensing solution for industrial-grade applications.
Technical Characteristics
❖ Dynamic Accuracy: ±0.1°
❖ Static Accuracy: ±0.05°
❖ Optional communication interfaces: RS485 / RS232 / TTL
❖ Measuring Range: Roll ±180°, Pitch ±90°, Yaw ±180°
Application Field
★ Leveling of construction machinery ★ Aircraft attitude control
★ Vessel attitude monitoring ★ Monitoring & control for agricultural machinery
★ Heavy shock & vibration crushing equipment ★ Monitoring and control of engineering vehicles
Performance Parameters
|
DTS |
Parameter |
|
|
Measurement Range(Initial value after power failure is 0°) |
Roll ±180°, Pitch ±90°, Azimuth ±180° |
|
|
Measurement Axis |
X-axis / Y-axis / Z-axis |
|
|
Roll and Pitch Resolution 1) |
0.01° |
|
|
Roll and Pitch Static Accuracy @25℃ |
±0.05° |
|
|
Roll and Pitch Dynamic Accuracy (rms) @25℃ |
±0.1° |
|
|
Gyroscope |
Gyroscope Range |
±300°/S |
|
Oblique Stability (10s Mean) |
8.5°/h |
|
|
Oblique Instability (allan) |
4.5°/h |
|
|
Angle Random Walk Coefficient (allan) |
0.25°/sqrt(h) |
|
|
Acceleration |
Acceleration range |
±4 / ±16(optional) |
|
Bias stability (10s mean) |
0.02mg |
|
|
Bias instability (allan) |
0.005mg |
|
|
Velocity random walk coefficient (allan) |
0.005m/s/sqrt(h) |
|
|
Zero-point temperature coefficient3)@-40～85℃ |
±0.01°/℃ |
|
|
Sensitivity temperature coefficient4)@-40～85℃ |
≤100ppm/℃ |
|
|
Power-on start-up time |
≤3.5s |
|
|
Response time |
0.01s |
|
|
Communication protocol |
RS485/RS232/TTL optional |
|
|
Electromagnetic compatibility |
According to EN61000 and GBT17626 |
|
|
Mean time between failures (MTBF) |
≥98000 hours/time |
|
|
Insulation resistance |
≥100 megaohm |
|
|
Shock resistance |
100g@11ms, triaxial (half-sine wave) |
|
|
Vibration resistance |
10grms,10～1000Hz |
|
|
Protection class |
IP67 / IP68(optional) |
|
|
Weight |
Single connector ≤165g (excluding cable) / Dual connector ≤180g (excluding cable) |
|
|
1) Resolution: The smallest angular change that the sensor can detect within its effective range, reflecting its ability to monitor minute tilt fluctuations. |
||
Electrical Parameters
|
Parameters |
Condition |
Minimum Value |
Typical Value |
Maximum Value |
Unit |
|
|
Power supply voltage |
Standard |
9 |
12 |
24 |
36 |
V |
|
|
Other voltage |
|
|
|||
|
Operating current |
No load |
|
40mA(12V) |
|
mA |
|
|
|
|
|
||||
|
Operating temperature |
|
-40 |
|
85 |
℃ |
|
|
Storage temperature |
|
-40 |
|
85 |
℃ |
|
Interface Definition
|
PIN/Thread Color |
Definition |
Description |
|
|
PIN1 / Brown |
9~36V |
Power supply positive terminal |
|
|
PIN2 / White |
RS232_RXD/TTL_RXD/485_D+ |
Signal output |
|
|
PIN3 / Blue |
RS232_TXD/TTL_TXD/485_D- |
Signal output |
|
|
PIN4 / Black |
GND |
Power supply negative terminal |
|
|
PIN5 / Gray |
PE |
Protective ground |
|
Connector pin definition diagram PCBA board wiring definition diagram
Product Dimensions
PCBA Dimension Diagram
Single panel dimensions: L39×W37×H12.2mm
Installation dimensions: L35×W28mm
Single-head (male) connector housing dimension drawing
Shell Size: L83×W47×H22.5mm
Recommended screws: 4 M5 screws
head (male and female) connector housing dimension diagram
Shell Size: L96×W47×H22.5mm
Recommended screws: 4 M5 screws
Corrosion-resistant shell size diagram
Shell Size: L95.3×W56×H24.5mm
Recommended screws: 4 M5 screws
Company Details
Business Type:
Manufacturer
Year Established:
2
Total Annual:
10000000USD-15000000
Employee Number:
100~200
Ecer Certification：
Verified Supplier
Shenzhen Ruicom Technology Limited is a professional high-tech enterprise specializing in the research, development, and production of inertial sensing products. With a strong focus on sensing technology and industrial applications, we provide reliable and high-precision sensing solutions for custom... Shenzhen Ruicom Technology Limited is a professional high-tech enterprise specializing in the research, development, and production of inertial sensing products. With a strong focus on sensing technology and industrial applications, we provide reliable and high-precision sensing solutions for custom...
Get in touch with us
Leave a Message, we will call you back quickly!