315 MHz TPMS Tire Pressure Monitor Sensor For Chevrolet 13598773

This TPMS sensor is cross-referenced with the following OEM part numbers and equivalents:

This TPMS sensor is compatible with a broad range of vehicles. Below is a comprehensive compatibility list:

This OE part number is also compatible with vehicles from:

• Alfa Romeo
• Holden
• Opel
• Vauxhall

Note: This sensor may also be compatible with additional vehicle models not listed above. Always verify your original sensor part number and confirm compatibility with your specific vehicle before purchasing.

When the TPMS sensor begins to fail or its battery reaches the end of its service life, drivers may experience one or more of the following symptoms:

The most common indicator of a failing sensor is the persistent illumination of the TPMS warning light on the dashboard. If tire pressures are confirmed to be correct and the light remains on, the sensor itself is likely the issue.

A constantly flashing TPMS light (typically for about one minute upon startup) indicates a problem with one or more sensors. This could be due to a low battery, a damaged sensor, or a faulty connection.

The tire pressure display on the instrument cluster may show incorrect values, fail to update, or display dashes (—) instead of pressure readings.

The TPMS system may work intermittently, with the warning light turning on and off randomly during driving. This often indicates a weak sensor battery or internal component degradation.

The system may trigger warnings even when tire pressures are correct, or show inconsistent readings—or no readings at all.

Sensors can fail due to battery depletion, damage from road debris, or corrosion. Valve stem corrosion is a frequent issue, especially in areas that use road salt during winter.

The sensor is equipped with an automotive-grade battery with an expected service life of 5 to 7 years (up to 10 years under optimal conditions). The battery is non-replaceable, meaning the entire sensor unit must be replaced when the battery is depleted.

Before purchasing, confirm that your vehicle's original sensor carries part number 13598773. This number can typically be found:

• Printed on the sensor body itself
• In the vehicle's service documentation
• Through the vehicle manufacturer's parts catalog

The sensor may also be listed under alternate numbers including 13589601, 13516165, 13512347, and 13522631.

This sensor operates at 433 MHz for most markets. Some vehicles may require 315 MHz. Verify which frequency your vehicle's TPMS system requires before purchasing. Some vehicles of the same model may have two different frequency versions.

• Pre-Programmed Sensors: Many aftermarket versions of this sensor come pre-programmed specifically for your vehicle's make, model, and year. These sensors are ready to install and only need to be activated with a TPMS scan tool.
• Programmable Sensors: Some versions are universal and can be programmed to match your vehicle's requirements.

Important: This sensor requires proper installation and activation. Key points to consider:

• Pre-Programmed Option: The sensor is 100% new and comes pre-programmed specifically for your make/model/year of vehicle. Simply activate them using a TPMS scan tool.
• Activation Procedure:
  1. Select "Check Sensor" in the TPMS scan tool
  2. Select vehicle brand, model, and year
  3. Select tire location and push the button to trigger
  4. Wake up sensor successfully and display sensor information on screen
• Relearn Procedure: The relearn procedure follows the same process as the vehicle's learn procedure. Check your vehicle's user guide for the specific relearn procedure.
• Professional Installation: Installation of TPMS sensors is recommended to be performed by trained professionals. Tire installation specialists should be aware of the sensor's presence to avoid damage during tire mounting and demounting procedures.

This sensor is available with different valve configurations:

• Rubber Snap-In Valve
• Metal Clamp-In Valve

Verify which type is correct for your vehicle before purchasing.

Sensors can be replaced individually as they fail, or as a complete set of four. The choice depends on:

• The age of the remaining sensors (if approaching 5–7 years, consider full set replacement)
• Budget considerations
• The specific failure pattern (single sensor vs. multiple failures)

This sensor is designed for any wheel position (Left, Right, Front, Rear) and does not require position-specific programming.

The sensor is designed to withstand extreme operating conditions:

• Operating Temperature: -40°C to +125°C
• Storage Temperature: -40°C to +35°C
• Operating Humidity: ≤90%
• Waterproof Rating: IP67

When purchasing replacement sensors:

• Choose sensors that meet or exceed OEM specifications
• Verify the product includes a warranty (typically 1–3 years)
• Ensure the sensor is supplied new and in original packaging
• Confirm the sensor includes the appropriate valve stem configuration
• Look for sensors with IP67 waterproof rating for all-weather durability

After installation:

• Use a TPMS scan tool to activate and verify the sensor
• Drive the vehicle to allow the sensor to communicate with the TPMS receiver
• Monitor the TPMS display to confirm pressure readings are appearing correctly
• If the warning light persists, a diagnostic scan may be required to identify any remaining issues

When ordering this sensor, provide the following vehicle information to ensure correct compatibility:

• Make and model
• Year of production
• Target market (as frequencies may differ by region)
• If unsure, provide your old sensor's OE number or pictures