700Ohm Position Nissan Crankshaft Sensor For Dacia Infiniti Opel Suzuki Vauxhall

Crankshaft Position Sensor 6079050300/A6079050300 For DACIA / INFINITI / MERCEDES-BENZ / NISSAN / OPEL / SUZUKI / VAUXHALL

Specifications

Cross-Reference

Part number 6079050300 is recognized across multiple brands and supplier lines. The following cross-reference numbers are commonly associated with this sensor:

Note: Cross-reference numbers are provided for reference purposes only. Always verify compatibility with your specific vehicle before purchase.

Compatible Engine & Vehicle Applications

Part number 6079050300 is compatible with a broad range of vehicles across multiple manufacturers, including DACIA, EVOBUS, INFINITI, MERCEDES-BENZ, NISSAN, OPEL,  SUZUKI, and VAUXHALL.

Compatible Brands and Models

Note: Compatibility may vary by specific vehicle configuration, production date, and regional specifications. Always verify fitment for your particular vehicle before purchase.

Common Failure Symptoms

A failing or malfunctioning crankshaft position sensor can produce a range of noticeable symptoms. Early recognition of these warning signs can prevent more serious engine damage and costly repairs.

1. Engine Starting Difficulties (Hard Start / No-Start)

The most common symptom of a failing crankshaft position sensor is difficulty starting the engine. The crankshaft position sensor provides the ECU with the information that the engine is showing positive RPM and is ready to start. If the ECU does not receive a signal from the sensor, or the sensor is outputting values that it is not anticipating, the engine may crank for an extended period before starting, or may not start at all.

2. Engine Stalling

A failing crankshaft position sensor can cause the engine to stall unexpectedly while driving or at idle. The stalling can occur suddenly and without warning, often with the tachometer dropping to zero during the event. In some cases, the engine may restart immediately, while in others it may require a cooling-off period.

3. Rough Idle

When the crankshaft position sensor provides an erratic or incorrect signal, the engine may exhibit a rough or uneven idle. This occurs because the ECU cannot properly synchronize fuel delivery and ignition timing without accurate crankshaft position data.

4. Loss of Power

A failing sensor can cause a noticeable loss of engine power, particularly during acceleration. The engine may feel sluggish or unresponsive when the throttle is applied.

5. Check Engine Light Illumination

A malfunctioning crankshaft position sensor will typically trigger the Check Engine Light. Common diagnostic trouble codes associated with this sensor include:

• P0335 – Crankshaft Position Sensor "A" Circuit Malfunction
• P0336 – Crankshaft Position Sensor "A" Circuit Range/Performance
• P0339 – Crankshaft Position Sensor "A" Circuit Intermittent

6. Causes of Failure

Common causes of crankshaft position sensor failure include:

• Mechanical damage – Physical impact or wear
• Damage to the Encoder Wheel – The trigger wheel or signal plate may be damaged
• Damage to Internal Circuits – Electrical failure within the sensor
• Interruption in connections to the ECU – Wiring issues or loose connections
• Corrosion – Moisture ingress causing terminal corrosion

Important Purchase Considerations

When purchasing a replacement crankshaft position sensor (Part No. 6079050300), consider the following factors to ensure you select the right product for your needs:

1. Verify Part Number Accuracy

Always confirm that the part number on the replacement sensor matches your vehicle's requirements. Part number 6079050300 may also be referenced as A6079050300, 607 905 03 00, or A 607 905 03 00. Verify that the sensor you are purchasing carries the correct OE number for your specific vehicle application.

2. Confirm Vehicle Compatibility

This sensor is vehicle-specific and must be compatible with your engine system. Cross-reference the sensor with your vehicle's:

• Make and model – DACIA, EVOBUS, INFINITI, MERCEDES-BENZ, NISSAN, OPEL, SUZUKI, VAUXHALL
• Model year
• Engine configuration
• Production date

3. Check Technical Specifications

Verify that the replacement sensor matches the required specifications:

• Sensor Type: Inductive Sensor
• Resistance: 700 Ohm
• Mounting Depth: 47 mm
• Number of Pins: 2-pin connector
• Cable: Without cable

4. Choose Quality Over Price

The crankshaft position sensor is a critical engine management component. Choose a sensor that meets or exceeds OEM specifications for:

• Signal accuracy – Proper pulse generation and amplitude
• Durability – Resistance to heat, vibration, and contamination
• Precision engineering – Exact fit and function matching original specifications

Sensors from reputable brands like Febi Bilstein, and Hella are tested to OE standards and are built to withstand the demands of the environment with high-quality materials and electronics.

5. Inspect the Connector and Wiring

Before replacing the sensor, thoroughly inspect the sensor connector for looseness, poor connections, bending, corrosion, contamination, or damage. In some cases, the issue may be related to the wiring or connector rather than the sensor itself. Check the crankshaft sensor electrical circuits and inspect for damage. If a fault is identified in the sensor circuit, repair the wiring before replacing the sensor.

6. Consider Professional Installation

The crankshaft position sensor is typically located near the crankshaft pulley/harmonic balancer or flywheel/transmission depending on the engine's design. Access may require working from underneath the vehicle or removing components for clearance. Installing the sensor requires specific mechanical skills. Consider whether you have the tools and expertise for DIY installation or if professional installation is recommended.

7. Warranty Coverage

Verify the warranty terms offered with the sensor. Most OEM-grade sensors come with a minimum 12-month warranty. A longer warranty period often indicates greater confidence in product quality.

8. Shipping and Handling

When ordering online, confirm shipping terms and delivery timelines. Ensure the seller uses reputable shipping carriers to protect the sensor during transit. The sensor is relatively compact, with approximate dimensions of 7.3 × 7.1 × 4.6 cm and a weight of approximately 0.036–0.05 kg