WUXI JINQIU MACHINERY CO.,LTD.
| Payment Terms | T/T, L/C, D/A, D/P, Western Union, MoneyGram |
| Supply Ability | 120 sets per month |
| Delivery Time | 40 days |
| Packaging Details | exporting package |
| casting material | epoxy resin |
| casting way | vacuum |
| advantage-1 | automatic material preparation |
| advantage-2 | vacuum can be set |
| advantage-3 | automatic control |
| Brand Name | gremet |
| Model Number | KC series |
| Certification | CE,ISO,SGS |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Pressure Swing Drying Oil Immersed Distribution Transformer Vacuum Drying
Distribution Transformer Vacuum Drying Tank With Germany Leybold Pump
PLC Touch Scren Control Power Transformer Vacuum Drying Tank With Germany
Round Shape Vacuum Drying Tank For Power Transformer
Product Specification
| Payment Terms | T/T, L/C, D/A, D/P, Western Union, MoneyGram | Supply Ability | 120 sets per month |
| Delivery Time | 40 days | Packaging Details | exporting package |
| casting material | epoxy resin | casting way | vacuum |
| advantage-1 | automatic material preparation | advantage-2 | vacuum can be set |
| advantage-3 | automatic control | Brand Name | gremet |
| Model Number | KC series | Certification | CE,ISO,SGS |
| Place of Origin | CHINA | ||
| High Light | Power Transformer Casting Epoxy Resin ，Casting Epoxy Resin Mixing ，Power Transformer Epoxy Resin Mixing | ||
Epoxy vacuum casting equipmentStatic casting of transformers
Advantages of static mixing and pouring equipment:
1. Automatic batching, improving the accuracy of mixing ratio and reducing labor intensity.
2. Automatic material preparation, vacuum can be set, automatic control, to avoid the evaporation of accelerators and other substances caused by prolonged high vacuum.
3. Suitable for automatic proportioning of resins, curing agents, and fillers.
4. Adopting a static mixer, suitable for large-scale or intermittent production, pollution-free. Easy to clean, with minimal waste.
5. Single component resin can be circulated through static mixers and pouring valves to avoid clogging caused by filler precipitation.
6. It can achieve automatic or manual pouring, and the pouring amount of each coil can be set and recorded for comparison.
7. High degree of automation, with more process monitoring and recording, and convenient operation. Equipped with advanced human-machine interface, it can achieve online remote fault diagnosis.
8. Equipment is environmentally friendly and energy-saving. While ensuring production capacity and quality, the equipment has low power consumption, less resin waste, and occupies less space.
Mixing system:
There are two material preparation tanks designed with an effective capacity of 120-300 liters (optional). According to the proportional relationship, each batch can continuously mix epoxy resin and curing agent.
The resin, curing agent, and mixture are heated by their respective heating systems. According to process requirements, the material temperature can be set between room temperature and 90 ℃, with an error range of ± 2 ℃.
The material pipe adopts a double-layer jacket structure and shares a water heater with the material tank to ensure a constant material temperature. The mixture can also be cooled down to extend its service life.
Automatic metering pouring system:
By using a metering pump, two single component materials are mixed in a static mixer and finally poured onto the mold.
Because the mixing time is fast and short, the mixture is fresh and has good fluidity, and the wettability of the coil is improved, it can prevent the aging problem of resin gel caused by the common long-term mixing of dynamic mixing.
The discharge position of the metering pump and static mixer is equipped with sensors, which can measure and monitor the mixing ratio online, ensuring that the measurement of each stroke of pouring is correct and the mixing is uniform, avoiding coil accidents that cannot be solidified. The measurement and monitoring data can be recorded and stored. The measurement and monitoring device is reliable and will not leak air or materials.
Automatic operating system:
The equipment is controlled by PLC and equipped with a color display. Vacuum suction, heating and vacuum stirring treatment, cycle and cleaning stroke number, mixing and pouring drying process can be automatically carried out through preset parameters.
The monitor can display the operating status of the electrical components of the equipment. Process parameters such as temperature, vacuum degree, weight, fault alarm, etc. can be displayed or set on a color display.
Company Details
Business Type:
Manufacturer
Year Established:
1969
Total Annual:
30,000,000-38,000,000
Employee Number:
280~300
Ecer Certification：
Verified Supplier
WxiJiniu Machinery Co.,ltd. formerly known as Wuxi Metallurgical Machinery Factory, registered trademark for "Jinqiu" brand, was founded in June 1969. It is in Wuxi city, 150 kilometers far from Shanghai city. We have been to stated enterprise, since 2002, we recombined to privat... WxiJiniu Machinery Co.,ltd. formerly known as Wuxi Metallurgical Machinery Factory, registered trademark for "Jinqiu" brand, was founded in June 1969. It is in Wuxi city, 150 kilometers far from Shanghai city. We have been to stated enterprise, since 2002, we recombined to privat...
Get in touch with us
Leave a Message, we will call you back quickly!