Beijing Silk Road Enterprise Management Services Co.,LTD
| Supply Ability | 5sets/month |
| Delivery Time | 60 working days |
| Packaging Details | Wooden case |
| Name | LFT Extrusion |
| Model | CHT75Extruder |
| Application | PA,PP,PET, Glass fiber, Carbon fiber |
| Output | 500-600kg/hr |
| Total Power | 160kw |
| Final Product | LFRT Granules |
| Brand Name | |
| Model Number | CHT75 |
| Certification | CE,ISO9001 |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
LFT-D Extrusion Line For PA PP Glass Fiber And Carbon Fiber Output 200kg/hr
90kw Twin Screw LFRT Extrusion Line 80-100kg/hr Output Easy Operation
50kg/hr Twin Screw Extrusion Line for LFT-D Coating with PP + Glass Fiber
Dual Screw LFRT Extrusion Machine High Strength CE ISO9001 Approved
Product Specification
| Supply Ability | 5sets/month | Delivery Time | 60 working days |
| Packaging Details | Wooden case | Name | LFT Extrusion |
| Model | CHT75Extruder | Application | PA,PP,PET, Glass fiber, Carbon fiber |
| Output | 500-600kg/hr | Total Power | 160kw |
| Final Product | LFRT Granules | Brand Name | |
| Model Number | CHT75 | Certification | CE,ISO9001 |
| Place of Origin | CHINA | ||
| High Light | plastic extruder machinery ，lft pellet production line | ||
LFT-D Long Fiber Glass CoatingTwin Screw Extrusion Line for 500kg/hr
General Introduction of LFT
Long-fiberReinforce Thermoplastic(LFRT), the length of the fiber glass is bigger than 3mm, while the commercialized LFRT is normally 6-25mm.
The modulus of long fiber reinforcement is double than that of short fiber reinforcement, while impact tension is four times, can keep its function without any change under the temperature of minus 30℃
The excellent properties are as following:
We always focusing on new innovation on the LFRT/LFT-D. We have already done such turn-key project for some customers. The projects are LFRT compounding system, LFT-D,LFT-G and LFT-D-ILC.
Our Product Advantages:
1. Perfect fiber pre-treatment system
2. Perfect extrusion die head design to ensure the fiber can immerge into the melt and minimize the fiber floatation.
3.High quality twin screw extruders to make sure the stable extrusion
4. Professional team working with you together
5. Effective fast cooling system for the strands
6.Constant pulling machine
7. Good pelletizer to make sure the uniform granule size
8. Good controlling system for the whole line
9. Turkey projects are available here. One stop service for you.
Specification:
| No. | Supply Scope | Qty. | |||||||||||||||||||||||||||||
| 1.0 | Raw material dealing system | ||||||||||||||||||||||||||||||
| 1.1 | GF unreeling system | 1set | |||||||||||||||||||||||||||||
| Platform for GF stacking Motor drive: 2.2kw, Parker inverter 11 pcs of GF spin Outlets and GF leading rack with magnetic | |||||||||||||||||||||||||||||||
| 1.2 | GF pre-heating system | 1set | |||||||||||||||||||||||||||||
| Special harden alloy heating roller Surface fine polishing, angle could be adjusted manually Each heating roller has a separated controller Temperature controller is OMRON Heating power controlled by SSR K-type stainless steel thermocouple With operation indicator | |||||||||||||||||||||||||||||||
| 2.0 | Twin screw extrusion system | ||||||||||||||||||||||||||||||
| 2.1 | Volumetric feeder | 1set | |||||||||||||||||||||||||||||
| Motor power: 1.1kw Parker inverter By twin screw feeding Rotation speed: 140rpm Hopper : 50L S.S made | |||||||||||||||||||||||||||||||
| 2.2 | CHT52-Eco twin screw extruder | 1set | |||||||||||||||||||||||||||||
| Main motor: AC motor,55KW；Parker inverter
Power transmission: Safety clutch torque limiter
Gearbox: High safety design; Latest steel alloy material for gears applied with special heat treatment and manufactured at high precision level; NSK bearings and imported seals applied, Special lubricating system equipped combined with immersing and forcing solutions; Oil pump:1.1kw with plate type heat exchanger Input/output rotary speed:1500/600rpm；
Extrusion line: Screw Diameter: 51.4mm,L/D:40:1； Maximum Screw speed:600rpm； Screw configuration:with modular structure, torque transmission by spline; S Screw material:W6Mo5Cr4V2,HRC58-62 Barrel configuration: with modular structure, each one with length of 4L/D,and the barrels connected together by bolts and pins; Barrel material: #45steel, with bi-metal linear inside the barrel. HRC58-62
Recommended barrels configuration:
No1 barrel with one feeding port for all possible components,, No.5 with one side feeding port and one venting port,that is blocked if necessary, No.9 with one vacuum port. Temperature controlling: Heating system: Cast-copper electric heater, total heating power with approx.40kw (No.1 Section cooled by water)； Cooling system:soft-water cooling system；With pipe-type heat exchanger to give bigger cooling capacity. Temp. controller:Siemens temperature controller Soft-water cooling system including one 1.1kw water-pump stainless steel water-box (with water Temp. gauge), heat exchanger, imported solenoid valves, water pressure indicator etc.
Steel base: Welding base with special pads; | |||||||||||||||||||||||||||||||
| 2.3 | Vacuum pump | 1set | |||||||||||||||||||||||||||||
| Vacuum pump motor: 3kw; vacuum pots with water inside, indicator; Vacuum degree: Max.-0.095Mpa | |||||||||||||||||||||||||||||||
| 2.4 | Melt pump | 1set | |||||||||||||||||||||||||||||
| Model: 100CC, Drive: 5.5kw Parker inverter With pressure sensor | |||||||||||||||||||||||||||||||
| 3.0 | Pelletizing system | ||||||||||||||||||||||||||||||
| 3.1 | Extrusion mold | 1set | |||||||||||||||||||||||||||||
| Number of holes: 11holes Cast-copper heater: Appr.28kw, cartridge heater Max heating temperature: 350C Inlet: 11 holes Outlet: 11holes | |||||||||||||||||||||||||||||||
| 3.2 | Water bath | 1set | |||||||||||||||||||||||||||||
| Size: 600x5000mm Inner water bath: 550x3000mm Made of stainless steel, with leading rollers Movable support frame | |||||||||||||||||||||||||||||||
| 3.3 | Pulling machine | 1set | |||||||||||||||||||||||||||||
| Center height: 1000mm Max. pulling speed: 40m/min Motor power: 4kw, Frequency inverter:Parker | |||||||||||||||||||||||||||||||
| 3.4 | Pelletizer | 1set | |||||||||||||||||||||||||||||
| For granules size:¯3X12mm Max.pulling speed: 60m/min Motor power: 5.5kw, Frequency inverter: Parker Operation box fixed on the pelletizer | |||||||||||||||||||||||||||||||
| 3.5 | Air knife: | 2sets | |||||||||||||||||||||||||||||
| Drive: 3kw Siemens motor Stainless steel made Double blower | |||||||||||||||||||||||||||||||
| 3.6 | Pelletizer | 1set | |||||||||||||||||||||||||||||
| Max output: 200kg/hr No. of strands: 15 Standard pellet: 3x12mm Cutter dimension: 300x100mm,32 tooth Effective rotation speed:350-1000rpm Haul off speed:0-96m/min Motor power: 5.5kw, Rotated cutter clearance: 0.08-0.12mm Leading roller: PU Frequency inverter: Parker | |||||||||||||||||||||||||||||||
| 3.7 | Vibrator | 1set | |||||||||||||||||||||||||||||
| Two layers Stainless steel made Motor: 2x0.37kw Capacity: 400-1200kg/hr | |||||||||||||||||||||||||||||||
| 3.8 | Air blower and silo | 1set | |||||||||||||||||||||||||||||
| Air blower: 3kw Stainless steel pipe line with clamps connection Silo: 1000L Stainless steel made With sight glass on the side Support frame | |||||||||||||||||||||||||||||||
| 4.0 | Electrical controlling system | ||||||||||||||||||||||||||||||
| 4.1 | Cabinet | ||||||||||||||||||||||||||||||
| Low voltage elements: EATON MULLER Frequency inverter: Parker Temperature controller : Siemens Switches: EATON MULLER Interlock desgin Extruder interlock with oil pump Extruder interlock with the feeder Extruder interlock with melt pump Over pressure alarm Over load alarm Cabinet connect with the extruder with plugs(except the main power cables) Cabinet will be 5m away from the extruder as COWIN standard Cabinet designed based on SIEMENS standards with wide space and good ventilation. | |||||||||||||||||||||||||||||||
| 4.2 | Siemens PLC and touch screen control | 1set | |||||||||||||||||||||||||||||
| Siemens S7-300 PLC Siemens TKP1200 touch screen With swing arm support, the touch screen will be installed at the die head place | |||||||||||||||||||||||||||||||
Company Details
Business Type:
Manufacturer
Year Established:
2012
Total Annual:
8000000-10000000
Employee Number:
80~100
Ecer Certification：
Verified Supplier
Beijing Silk Road Enterprise Management Services Co.,LTD is a professional compounding technology supplier. Thanks to the better understanding of mechanical and chemical combination. COWIN not only provide machinery to customers, but also a turn-key project is available to our customers. Beijing... Beijing Silk Road Enterprise Management Services Co.,LTD is a professional compounding technology supplier. Thanks to the better understanding of mechanical and chemical combination. COWIN not only provide machinery to customers, but also a turn-key project is available to our customers. Beijing...
Get in touch with us
Leave a Message, we will call you back quickly!