Zin Plated Aluminum / Steel Material Head Blind Rivets Nuts

Product Specification

Zin Plated Aluminum / Steel Material Head Blind Rivets Nuts

Description:

Blind rivets, blind rivets) the rivet body (rivet body) nail core (rivet stem or rivet mandrel).Is a kind of single rivet riveting, but must use a special tool, riveting gun riveting (manual, electric, pneumatic).Rivet, rivet pin core is pulled by special rivet gun, make the rivet body expansion, riveting. This type of rivet is particularly suited to inconvenience using common rivet riveting (must be from two sides) of riveting occasions, so it is widely used in building, automobile, ships, aircraft, machines, electrical appliances, furniture and other products.With open mouth oval head the most widely core pulling rivets, countersunk head core pulling rivets riveting occasions suitable for performance needs to be smooth, closed core pulling rivets is suitable for the requirements with high load and has a certain seal performance of riveting.

Inspection is required for a core pulling rivets finished product inspection: the rivet diameter, the rivet body length, the diameter of rivet cap thickness and cap, screw core length, the size of the screw core is exposed, head of nail size, and can consider the diameter after assembly.In the actual inspection, for to measure the weak link of the product, such as tensile resistance, shearing resistance, and core resistance force.

ISO15937 Closed end blind rivets with break pull mandrel and protruding head
Key, must pay attention to the rivet rivet foot shortage, have riveted in place;Hat is too large, or because the nail core and rivet body tube mouth pull not down;And jump, namely the screw core fracture size tensile force is too low or too thin.

Usually specifications / 4/4.8/4/4.8 of 2.4/3.2 of six series.

Nail core length for the 11 series 6-8-8.5-9.5-11-12-12.5-13-14.5-15.5-16-18-20

Performance level is divided into 15 level. Stainless steel grade of 51 level .

Specification:

Application:

Round head rivet is mainly used for riveting occasions with large lateral load, the most widely used.
Flat cone head rivet because nailhead hypertrophy, corrosion, commonly used in the hull, such as boiler water tank corrosion strong riveting occasions.
Countersunk head, countersunk head 1200 rivet is mainly used for surface must be smooth, with load is riveting.
Oval head, 1200 oval head rivet is mainly used for surface must be smooth, with load is riveting.
Flat head rivets used for riveting occasions with general load.
Flat head, flat head rivet is mainly used for sheet metal or nonmetal material such as leather, canvas, wood of riveting.
Large flat head rivets is mainly used for riveting of nonmetal materials.
Half a hollow rivet is mainly used for riveting occasions with load is not big.
The headless rivet is mainly used for riveting non-metallic materials.
Light weight, hollow rivet pin head is weak, for little with load of non-metallic materials of riveting.
Tubular rivets used in the not riveted with load situation of non-metallic materials.
Sign the rivet machine is mainly used for riveting, equipment nameplate on it.

Advantage:

1. Quality is guaranteed: Durability testing and critical technical design to enhance fasteners lifetime.

2. Professional Manufacturer: All of our Fastener are designed and manufactured according to buyers’ specification and performance.

3. Cost effective: Competitive prices with professional factory supply Perfect fastening solution with 10 years experiences to solve your problem: Wide range of parts selection.

4. Customized Ideal Fasteners: customized services according to the samples and drawings offered.