Shenzhen Anges Machinery Co., Ltd
| Payment Terms | T/T, L/C |
| Supply Ability | 400 units/ month |
| Delivery Time | 10-35 days |
| Packaging Details | Plywood case |
| Type | Air Cooled Type |
| Capacity | 50HP |
| Compressor typetype | Danfoss/Panosonic/Copeland |
| Refrigerant | R410a/R407C/R134A/R22 |
| Pump | Included 2 bar- 4 bar |
| Water tank | 345L |
| Voltage | 3PH~220V/380/415V~50HZ/60HZ |
| Dimension(l*w*h) | 2350*1760*2100 |
| Weight | 1550kg |
| Temperature range | 5℃ ~ 35℃ |
| Application | Industrial Cooling Solutions,Plastic & rubber / Chemical etc / Welding |
| Brand Name | ANGES |
| Model Number | ACK-50（F） |
| Place of Origin | China |
View Detail Information
Explore similar products
20ton Water Chiller Price Air Cooled Chiller glycol water chiller Modular
Portable 60Tr Air Cooled chiller Scroll compressor chiller Air Cooled Industrial
Air Cooled Water Chiller 12hp 12Ton Injection Molding Chiller portable chiller
5Ton chiller 5HP Portable chiller Injection Molding Chiller Air Cooled Chiller
Product Specification
| Payment Terms | T/T, L/C | Supply Ability | 400 units/ month |
| Delivery Time | 10-35 days | Packaging Details | Plywood case |
| Type | Air Cooled Type | Capacity | 50HP |
| Compressor typetype | Danfoss/Panosonic/Copeland | Refrigerant | R410a/R407C/R134A/R22 |
| Pump | Included 2 bar- 4 bar | Water tank | 345L |
| Voltage | 3PH~220V/380/415V~50HZ/60HZ | Dimension(l*w*h) | 2350*1760*2100 |
| Weight | 1550kg | Temperature range | 5℃ ~ 35℃ |
| Application | Industrial Cooling Solutions,Plastic & rubber / Chemical etc / Welding | Brand Name | ANGES |
| Model Number | ACK-50（F） | Place of Origin | China |
| High Light | Injection Molding Machine Industrial Water Chiller ，50ton Industrial Water Chiller ，Four Compressors Industrial Water Chiller | ||
50ton Air Cooled Industrial Water Chiller with four compressors for injection molding Machine
The four-compressor chiller significantly improves energy efficiency and reliability through intelligent load distribution, redundant design, and fine temperature control.
It is especially suitable for injection molding production scenarios with strict stability requirements.
Although its initial investment is higher than that of a single-compressor model, in the long run, it can quickly recover its costs through comprehensive benefits such as energy saving, waste reduction, and extended equipment life.
Specification
|
Item Model | ACK-50F | |
| Nominal cooling capacity | Kcal/h | 125904 |
| kw | 146.4 | |
| Input power | kw | 43.92 |
| Power supply | 3PH 380V 50HZ | |
| Refrigerant | Type | R22 |
| Type of control | Expansion valve | |
| Compressor | Type | Hermetic scroll |
| Power(kw) | 36.8 | |
| Condenser | Type | Finned copper tube + low noise outer rotor fan |
| Power(kw) | 3.12 | |
| Cooling air flow(m3/h) | 50000 | |
| Evaporator | Type | Shell and tube |
| Min Chilled fluid flow(m3/h) | 25.24 | |
| Inlet/outlet pipe caliber(inch) | 3 | |
| Water tank | Volume(L) | 345 |
| Pump | Power(kw) | 4 |
| Flow(m3/h) | 42 | |
| Lift(m) | 21 | |
| safety protection | compressor over temperature protection, over load protection, high and low pressure protection, flow switch protection, reversed and lacking phase protection, anti-freezing protection,fusible protection. | |
| Weight | kg | 1550 |
| Dimension | mm | 2350*1760*2100 |
Compared with the single compressor design, the advantages of configuring four compressors in the chiller for injection molding production are as follows:
1. Significantly improved energy efficiency, energy saving and consumption reduction
Flexible load adjustment
The four compressors can be started and stopped independently, and the number of operations can be intelligently allocated according to the actual cooling demand. For example: only 1-2 compressors are started at low load, and all are running at high load to avoid energy waste of "big horse pulling a small cart".
Partial load efficient operation
The efficiency of a single compressor decreases at low load, while the multi-compressor system operates in stages to always maintain each compressor in the high efficiency range, and the comprehensive energy efficiency ratio (COP) is improved by 20%-30%.
2. Enhanced operation stability and reduced failure rate
Redundant backup function
If a compressor fails, the remaining compressors can continue to work, avoiding the shutdown of the entire chiller due to a single point failure, and ensuring the continuous operation of the production line.
Spreading workload
Multiple compressors operate alternately to reduce the start-stop frequency and wear of a single compressor and extend the overall life of the equipment (especially suitable for 24-hour continuous production scenarios).
3. Precise temperature control to adapt to complex processes
More sophisticated capacity adjustment
The four compressors provide multi-level cooling capacity adjustment (such as 25%, 50%, 75%, 100%), accurately matching the mold cooling requirements and avoiding the impact of temperature fluctuations on product accuracy.
Quick response to load changes
When the injection molding machine frequently switches between different products or materials, the multi-compressor system can quickly adjust the output power to maintain a constant water temperature.
4. Convenient maintenance and reduced operating costs
Modular design, independent maintenance
A single compressor can be disassembled and repaired separately without shutting down the entire machine, reducing production interruption time.
Optimized spare parts costs
Multi-compressor systems usually use compressors of the same model, with universal spare parts and simpler inventory management.
Benefits of a chiller with four compressors compared to a single compressor
1. Energy saving and consumption reduction, reducing compressor wear and avoiding frequent start and stop.
2. Balance energy efficiency and cooling speed to adapt to the intermittent high demand of injection molding machines.
Company Details
Business Type:
Manufacturer,Importer,Exporter
Year Established:
2004
Total Annual:
40 Million-40 Million
Ecer Certification：
Verified Supplier
Anges Group which headquartered in Shenzhen city is specializes in the design and manufacture industrial process water chiller since 2004. We always adhered to the concept of "Environmental protection, Energy saving, Intelligent and Efficient" and have developed into a well-known supplier ... Anges Group which headquartered in Shenzhen city is specializes in the design and manufacture industrial process water chiller since 2004. We always adhered to the concept of "Environmental protection, Energy saving, Intelligent and Efficient" and have developed into a well-known supplier ...
Get in touch with us
Leave a Message, we will call you back quickly!