07012-00145 0701200145 Oil Seal For Swing Machinery PC130-8 KOMATSU

Product Specification

07012-00145 0701200145 Oil Seal for Swing Machinery PC130-8 KOMATSU
 
Description: Also known as an oil seal, shaftseal, or lip seal. Its function is to exclude dust, dirt, water or any other contaminant on one side

whilst retaining lubricant on the other. Generally it has been developed as a means of protecting the bearings of rotating shafts.

The basic operation of a shaft seal has the flexible lip held against the rotating part (usually the shaft) whilst the casing (or O.D.) is pressed into

the housing or bore holding the seal in place. The sealing lip needs some form of lubriC-A-Tion to avoid overheating and are usually energized by

means of a garter spring.

AppliC-A-Ted Models:

Our Oil Seals

Radial oil seals is constructed of rubber / FKM / ptfe / sealing lip, metal CNH and a spiralled tensioning spring and an internal CNH. Our Oil
Seals helping prevent lubricants, hydraulic Oil, water, or chemicals escape.

Oil Seal House also prevents the entry of dust and dirt into a machine. They also stop harmful contaminants from entering machinery, particularly in severe environments. Vital components of practically every type of machine and vehicle in operation, oil seals protect all types of precision-constructed, close-fitting ball, sleeve and roller bearings.

Different Type of Oil Seals

* Single Lip Oil Seal * double Lip Oil Seal * Shaft Oil Seal *

Different Profiles of Oil Seals

* TB Oil Seal * TC Oil Seal * TCN Oil Seal * DB Oil Seal * SA Oil Seal * TA

Oil Seal * SB Oil Seal * SC Oil Seal * CASSETTE Oil Seal

Different Manufacturers of Oil Seals

* TB Oil Seal * TC Oil Seal * TCN Oil Seal * DB Oil Seal * TCN Oil Seal * OKC3 Oil Seal * SB Oil Seal * SC Oil Seal * VC Oil Seal * VB Oil Seal

* MOX Oil Seal * MOD Oil Seal * KC Oil Seal * KB Oil Seal * DC Oil Seal * DB Oil Seal * OC Oil Seal * SBB Oil Seal * MG Oil Seal etc.

Different AppliC-A-Tions of Oil Seal Kits

* Arm Oil Seal * Boom Oil Seal * Bucket Oil Seal *Track Adjuster Oil Seal * Main pump Oil Seal * O Ring Oil Seal *
Back Lift Oil Seal * Lift Oil Seal * Steering Oil Seal *Loader Oil Seal * Excavator Oil Seal * Pump Oil Seal *
Breaker Oil Seal * Blade Oil Seal * Dump Oil Seal * Swing Oil Seal * Shaft Oil  Seal *

HUB Oil Seal * gear box Oil Seal * etc

Others:

We provide wide range of replacement Oil seal repair kits consist of different sizes, type used by OEMs i.e. C-A-Terpillar Oil Seal * Komatsu Oil Seal * Hitachi Oil Seal  * JCB Oil Seal *  Excavator Oil Seal * Dozer Oil Seal * Motor Oil Seal * Pump Oil Seal * Dumper Oil Seal * Crane Oil Seal * Motor Grader Oil Seal and other machines Oil Seal used in Mines, Cement Industries, Coal Industries, Steel Industries,Oil Industries etc.

Shaft Seals

Oil seals are an integral part in any rotating and moving part assembly. Oil
seals find great deal of usage in gearboxes, hydraulic cylinders, etc. The
usage of the seals in areas concerned with motion also earns them a name
of “Dynamic Oil Seals."

Constructional Aspects of an Oil Seal:

1. The oil seal comprises of a metal ring as the inward skeleton which gives
the auxiliary soundness to the oil seal.
2. The external skin is made of nitrile elastic and different materials which
are utilized in view of the prerequisite.
3. The spring on the lip of the oil seal has a tendency to give backing to the
lip and keeps the grease from spilling outside furthermore keeps the
passage of contaminants from outside. Taking into account the utilization of
the oil seal, the external skin layer has a tendency to contrast.

Materials utilized for the external skin of the oil seal.

1. Nitrile elastic - The generally utilized material for oil seals

2. Silicone – Used in particular appliC-A-Tions where just light loads are connected.

3. Poly acrylate

4. Fluroelastomer additionally famously known as FKM. – The high temperature safe material utilized as a part of spots where temperature is
more than 120 Degree Celcius.

5. PolytetraFluroEthylene (PTFE) The oils seals require certain essentials to be kept up for their appropriate working. They are as per the

following:

a) The pole on which the oil seal is to be mounted ought to be ground with the surface complete or surface harshness between 0.2 to 0.8 Microns.

It is best for the pole to be solidified atleast to 40 – 45 HRc keeping in mind the end goal to avoid groove arrangement on the pole because of the

weight applied by the spring.

b) The zone where the oil seal is situated is to be dive ground with a specific end goal to counteract wear grooves that regularly tend to destroy

the lip of the oil seal at a speedier rate.
.

How To Place Order:

1. Inquiry

2. The sales made an inquiry to the sales manager

3. Reply

4. Business negotiation

5. Make a deal

6. Make payment

7. Receice payment

8. Warehouse department checking and packing the products

9. Delivery(Your forwarder or we find forwarder by expresss shipping)

10. You receiced the products

11. After-sale follow up service

12. Time to reorder

Relative Parts: