Jinxi Steel Industry Group Co.Ltd.
| Payment Terms | L/C,D/A,D/P,T/T,Western Union,MoneyGram |
| Supply Ability | 100000 |
| Delivery Time | 7-25 dyas |
| Product Name | SSAW steel Pipe,Spirally Submerged Arc Welding Pipe ,SAWH Pipe, Sprial Steel Pipe,Piling Structure SSAW Pipe |
| Standard | API 5L |
| Beveled Ends SSAW Pipe Tube Type | Welded Steel Pipe |
| Beveled Ends SSAW Pipe OD | 219mm-4064mm |
| Beveled Ends SSAW Pipe Thickness | 3.2mm-40mm |
| Beveled Ends SSAW Pipe Length Range | 5.8/6/11.8/12/18/32meters |
| Beveled Ends SSAW Pipe Ends Type | Beveled Ends, Plain Ends |
| Beveled Ends SSAW Pipe Protection Caps | Plastic Caps |
| Brand Name | Jinxi Pipe |
| Model Number | Super large diameter welded pipe |
| Certification | ISO,BV.SGS,TUV |
| Place of Origin | China |
View Detail Information
Explore similar products
Onshore Construction SSAW Carbon Steel Pipe Anti Rust Thickness 3.2mm-40mm
Oil and Gas Line SSAW Steel Pipe API 5L GR.B Thickness 3.2mm-40mm
API 5L X42 SSAW Steel Pipe Length 6m 32meters For Oil / Gas Industry
API 5L X46 SSAW Line Pipe Thickness 3.2mm-40mm For Natural Gas Pipelines
Product Specification
| Payment Terms | L/C,D/A,D/P,T/T,Western Union,MoneyGram | Supply Ability | 100000 |
| Delivery Time | 7-25 dyas | Product Name | SSAW steel Pipe,Spirally Submerged Arc Welding Pipe ,SAWH Pipe, Sprial Steel Pipe,Piling Structure SSAW Pipe |
| Standard | API 5L | Beveled Ends SSAW Pipe Tube Type | Welded Steel Pipe |
| Beveled Ends SSAW Pipe OD | 219mm-4064mm | Beveled Ends SSAW Pipe Thickness | 3.2mm-40mm |
| Beveled Ends SSAW Pipe Length Range | 5.8/6/11.8/12/18/32meters | Beveled Ends SSAW Pipe Ends Type | Beveled Ends, Plain Ends |
| Beveled Ends SSAW Pipe Protection Caps | Plastic Caps | Brand Name | Jinxi Pipe |
| Model Number | Super large diameter welded pipe | Certification | ISO,BV.SGS,TUV |
| Place of Origin | China | ||
| High Light | Water Infrastructure SSAW Welded Pipe ，Leakproof SSAW Welded Pipe ，Beveled Ends SSAW Welded Pipe | ||
SSAW Pipe with Beveled Ends for Welding
Specifications
Beveled ends (BE) on Spiral Submerged Arc Welded (SSAW) pipes consist of an angled, tapered cut at the pipe ends, designed specifically to facilitate high-quality, full-penetration butt welding. By creating a V-shaped groove when two pipes are aligned, this geometry allows for deeper weld penetration, uniform heat distribution, and reduced stress concentrations. This design is the industry standard for high-pressure, leak-proof connections in oil, gas, and water infrastructure.
| American Standard | Standard Name |
| API 5L | Specification for Line Pipe |
Beveled Ends SSAW Pipe Chemical Composition
Sources American Standard API SPECIFICATION 5L Table 4 — Chemical composition for PSL 1 pipe with t ≤ 25,0 mm (0.984 in)
| Steel Grade | Mass fraction, based on heat and product analyses a,g % |
||||||
| C | Mn | P | S | V | Nb | Ti | |
| max b | max b | max | max | max | max | max | |
| Seamless Pipe | |||||||
| A | 0.22 | 0.9 | 0.03 | 0.03 | – | – | – |
| B | 0.28 | 1.2 | 0.03 | 0.03 | c,d | c,d | d |
| X42 | 0.28 | 1.3 | 0.03 | 0.03 | d | d | d |
| X46 | 0.28 | 1.4 | 0.03 | 0.03 | d | d | d |
| X52 | 0.28 | 1.4 | 0.03 | 0.03 | d | d | d |
| X56 | 0.28 | 1.4 | 0.03 | 0.03 | d | d | d |
| X60 | 0.28 e | 1.40 e | 0.03 | 0.03 | f | f | f |
| X65 | 0.28 e | 1.40 e | 0.03 | 0.03 | f | f | f |
| X70 | 0.28 e | 1.40 e | 0.03 | 0.03 | f | f | f |
| Welded Pipe | |||||||
| A | 0.22 | 0.9 | 0.03 | 0.03 | – | – | – |
| B | 0.26 | 1.2 | 0.03 | 0.03 | c,d | c,d | d |
| X42 | 0.26 | 1.3 | 0.03 | 0.03 | d | d | d |
| X46 | 0.26 | 1.4 | 0.03 | 0.03 | d | d | d |
| X52 | 0.26 | 1.4 | 0.03 | 0.03 | d | d | d |
| X56 | 0.26 | 1.4 | 0.03 | 0.03 | d | d | d |
| X60 | 0.26 e | 1.40 e | 0.03 | 0.03 | f | f | f |
| X65 | 0.26 e | 1.45 e | 0.03 | 0.03 | f | f | f |
| X70 | 0.26e | 1.65 e | 0.03 | 0.03 | f | f | f |
| a. Cu ≤ = 0.50% Ni; ≤ 0.50%; Cr ≤ 0.50%; and Mo ≤ 0.15%, | |||||||
| b. For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for Mn is permissible, up to a maximum of 1.65% for grades ≥ L245 or B, but ≤ L360 or X52; up to a maximum of 1.75% for grades > L360 or X52, but < L485 or X70; and up to a maximum of 2.00% for grade L485 or X70., | |||||||
| c. Unless otherwise agreed NB + V ≤ 0.06%, | |||||||
| d. Nb + V + TI ≤ 0.15%, | |||||||
| e. Unless otherwise agreed., | |||||||
| f. Unless otherwise agreed, NB + V = Ti ≤ 0.15%, | |||||||
| g. No deliberate addition of B is permitted and the residual B ≤ 0.001% | |||||||
Beveled Ends SSAW Pipe Mechanical Properties
Sources American Standard API SPECIFICATION 5L Table 6 — Requirements for the results of tensile tests for PSL 1 pipe
| Pipe Grade | Pipe Body of SMLS and Welded Pipes | Weld seam of EW,LW,SAW and COW pipes | ||
| Yield Strength a | Tensile Strength a | Elongation | Tensile Strength b | |
| Rt0,5 PSI Min | Rm PSI Min | (in 2in Af % min) | Rm PSI Min | |
| A | 210 (30 500) | 335 (48 600) | c | 335 (48 600) |
| B | 245(35 500) | 415 (60 200) | c | 415 (60 200) |
| X42 | 290 (42 100) | 415 (60 200) | c | 415 (60 200) |
| X46 | 320 (46 400) | 435 (63 100) | c | 435 (63 100) |
| X52 | 360 (52 200) | 460 (66 700) | c | 460 (66 700) |
| X56 | 390 (56 600) | 490 (71 100) | c | 490 (71 100) |
| X60 | 415 (60 200) | 520 (75 400) | c | 520 (75 400) |
| X65 | 450 (65 300) | 535(77 600) | c | 535 (77 600) |
| X70 | 485 (70 300) | 570 (82 700) | c | 570 (82 700) |
| a. For intermediate grade, the difference between the specified minimum tensile strength and the specified minimum yield for the pipe body shall be as given for the next higher grade. | ||||
| b. For the intermediate grades, the specified minimum tensile strength for the weld seam shall be the same as determined for the body using footnote a. | ||||
| c. The specified minimum elongation, Af, expressed in percent and rounded to the nearest percent, shall be determined using the following equation: | ||||
| *Please refer to the original standard for the formula in the image. | ||||
| Where C is 1 940 for calculation using Si units and 625 000 for calculation using USC units | ||||
| Axc is the applicable tensile test piece cross-sectional area, expressed in square millimeters (square inches) , as follows | ||||
| – For circular cross-section test pieces, 130mm2 (0.20 in2) for 12.7 mm (0.500 in) and 8.9 mm (.350 in) diameter test pieces; and 65 mm2 (0.10 in2) for 6.4 mm (0.250in) diameter test pieces. | ||||
| – For full-section test pieces, the lesser of a) 485 mm2 (0.75 in2) and b) the cross-sectional area of the test piece, derived using the specified outside diameter and the specified wall thickness of the pipe, rounded to the nearest 10 mm2 (0.10in2) | ||||
| – For strip test pieces, the lesser of a) 485 mm2 (0.75 in2) and b) the cross-sectional area of the test piece, derived using the specified width of the test piece and the specified wall thickness of the pipe, rounded to the nearest 10 mm2 (0.10in2) | ||||
| U is the specified minimum tensile strength, expressed in megapascals (pounds per square inch) | ||||
Beveled Ends SSAW Pipe Manufacturing process
Raw Material Inspection → Strip Joining → Pre-forming Treatment → Conveyor Control → Roll Forming → Gap Control → Welding → NDT (Non-Destructive Testing) → Single Pipe Cutting → Batch Inspection → Defect Repair → Weld Inspection → Hydrostatic Testing → End Finishing
Beveled Ends SSAW Pipe Application
Beveled Ends SSAW Pipe Packing & Loading
→SSAW Pipe is transported in containers
(Nesting Packaging): Large-diameter SSAW pipes can be nested within one another, similar to Russian dolls, to utilize the internal space of larger pipes and minimize the volume of the cargo. This is a "game-changer" for reducing freight expenses and improving supply chain efficiency.
SSAW Pipe is transported by bulk carrier
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Exporter,Trading Company,Seller
Year Established:
1986
Total Annual:
10000000000-30000000000
Employee Number:
100~500
Ecer Certification：
Verified Supplier
Jinxi Steel, a professional manufacturer of steel pipes and fittings, is located in Changsha City. Guided by the scientific development concept, Jinxi Steel will comprehensively reform and develop, adhere to the path of quality and efficiency under the guidance of science and technology, persist in ... Jinxi Steel, a professional manufacturer of steel pipes and fittings, is located in Changsha City. Guided by the scientific development concept, Jinxi Steel will comprehensively reform and develop, adhere to the path of quality and efficiency under the guidance of science and technology, persist in ...
Get in touch with us
Leave a Message, we will call you back quickly!