Ain Technology (Shenzhen) Co., Ltd
| Packaging Details | Packaging Details:gift box/color box packaging or according t |
| Delivery Time | 25-30 days |
| Payment Terms | TT IN ADVANCE |
| Name | 360 Degree SINGLE PASSIVE INFRARED DETECTOR |
| Input Voltage | 10〜16V DC |
| Operating Current | 20mA(max.) |
| Warm-up Period | 35±5sec |
| Alarm Period | 2.0±0.5sec |
| Environmen Hum | 95% max. |
| Weight | 3.7 oz (105g) |
| Usage | Alarm |
| Model Number | DS-360 |
| Place of Origin | China |
| Brand Name | ALEPH |
| Certification | CE ISO |
View Detail Information
Explore similar products
AL-40S Wired Wide Angle Infrared Motion Sensor
DM-360 Dual Element Passive Alarm Infrared Detector
DM-360 PIR Motion Sensor Dual Passive Infrared Detector
QT-60 Outdoor Infrared PIR Detector
Product Specification
| Packaging Details | Packaging Details:gift box/color box packaging or according t | Delivery Time | 25-30 days |
| Payment Terms | TT IN ADVANCE | Name | 360 Degree SINGLE PASSIVE INFRARED DETECTOR |
| Input Voltage | 10〜16V DC | Operating Current | 20mA(max.) |
| Warm-up Period | 35±5sec | Alarm Period | 2.0±0.5sec |
| Environmen Hum | 95% max. | Weight | 3.7 oz (105g) |
| Usage | Alarm | Model Number | DS-360 |
| Place of Origin | China | Brand Name | ALEPH |
| Certification | CE ISO | ||
| High Light | pir detector dual passive infrared ，passive infrared motion sensor | ||
| MODEL | DS-360 |
| Detection Range | Coverage10m diameter (Mounting height 3m) |
| Input Voltage | 10〜16V DC |
| Operating Current | 20mA(max.) |
| Sensitivity | 2°C(0. 6m/sec) |
| Warm-up Period | 35±5sec |
| Alarm Period | 2.0±0.5sec |
| LED Indicator | Red Alarm LED(Selectable On/Off) |
| Alarm Output | N.C., 20V DC 100mA max. |
| Tamper Output | N.C.,Open when cover is removed. 30V DC,0.5A max. |
| Mounting Height | 7.8 〜11.8ft (2.4〜3.6m) |
| Operating Temp. | 14°F ~ 131°F (-10C~55C) |
| Environmen Hum | 95% max. |
| Weight | 3.7 oz (105g) |
| Dimensions | 4.72"DIA.x1.61" H (120mmDIA.x41mm H) |
| TROUBLE | TROUBLE CAUSE | REMEDY |
| Unit does not power up. | No or low input power. | Apply proper input voltage. |
| Input power polarity reversed. | Correct wiring polarity. | |
| Alarm LED does not light | LED jumper is set to “LED OFF”. | Set LED jumper to “LED ENABLE”(See Section 2). |
| Incorrect sensor mounting height. | Increase /decrease mounting height. | |
| Alarm LED/Relay triggers without movement in detection area. | Unsecured environment:Animals / rodents in detection area . | Block access of animals / rodents. |
| Heater/air conditioning equipment in sensor view. | Re-aim sensor. | |
| Direct sun or headlights in sensor view. | Add curtain / shade to block light sources. | |
| LED indicates alarm, no alarm output. | Incorrect wiring at alarm output terminals. | Correct wiring fault. |
| Lightning damage. | Replace sensor. | |
| Alarm LED on constantly, no fault in protected area or wiring. | Defective unit. | Replace sensor. |
| Unit continues to operate after the input power has been disc-onnected. | The wire to the “ - ” power input was disconnected, the“ + ” is still connected. the power can now find a return path through the Alarm Output protection device and alarm wiring. | Disconnect wire from the “ + “ power input. |
8. NOTES
Company Details
Business Type:
Manufacturer,Importer,Exporter
Year Established:
1935
Ecer Certification：
Active Member
AIN Technology (Shenzhen) Co., Ltd. is an international enterprise which is exclusively designated and authorized by ALEPH Group to sell ALEPH brand security products, door magnetic switches, and Panther 4000, which is a wireless security systerm. AIN has set up production bases and branches in Chin... AIN Technology (Shenzhen) Co., Ltd. is an international enterprise which is exclusively designated and authorized by ALEPH Group to sell ALEPH brand security products, door magnetic switches, and Panther 4000, which is a wireless security systerm. AIN has set up production bases and branches in Chin...
Get in touch with us
Leave a Message, we will call you back quickly!