Product Specification

10.1 inch Custom IP65 IP67 1000 Nits Embedded Pc Win 10 All in One Fanless Embedded industrial all-in-one Touch Screen Device

On a food packaging production line, workers adjust parameters through an embedded device. The oil-proof touchscreen responds accurately to gloved hands, while the device's internal components operate reliably at a high temperature of 60°C. Touch Screen Device are reshaping human-machine interaction in industrial settings. Combining touch control with robust industrial design, these computers provide efficient control even in challenging environments involving dust, oil, and vibration.

Touch Screen Device and Ruggedized Design

Touch Screen Device utilize military-grade solutions for their touch control layers:

Surface hardening treatment: 7H tempered glass with a superimposed nano-oleophobic layer resists metal debris impact in automotive welding workshops.  The screen maintains 92% transmittance even after 3,000 daily abrasions.

Multi-mode touch: The projected capacitive screen supports glove and wet-hand operation. The resistive screen version is suitable for explosion-proof scenarios, maintaining a touch error of ≤ 0.3mm even at -25°C in chemical plants.

Dynamic anti-interference: With EMC Class 4 certification, touch coordinate drift remains less than 1 pixel, even under the strong electromagnetic interference of a 10kV substation.

Its protective system directly addresses common industrial challenges: a fully enclosed magnesium-aluminum alloy body (IP65 protection rating) and a three-dimensional heat dissipation structure enable the device to operate continuously for 8,000 hours without failure in the high-dust environment of a flour mill. Actual measurements taken in a lithium battery electrolyte workshop demonstrate that its corrosion resistance is four times greater than that of traditional equipment.  The impedance value of the internal circuit board remains stable within 5Ω, even at 98% humidity.

Industrial Protocol Integration and Intelligent Edge Empowerment

The Touch Screen Device breaks down control silos.  Equipped with six major industrial protocol stacks (including Profinet, EtherCAT, and Modbus), it can simultaneously drive PLCs, machine vision systems, and AGV systems. In a case study of an automotive welding line, the equipment connected 32 welding gun controllers via a Gigabit Ethernet port. This facilitated real-time analysis of the current curve and dynamic adjustment of welding parameters, resulting in a reduction of the virtual welding rate from 0.8% to 0.12%.

The scalable design, featuring two PCIe slots and four-way GPIO, supports plug-and-play modules such as 5G and LoRa, effectively addressing the need for rapid transformation in flexible production lines.

From 3C electronics production lines to smart water pump stations,Touch Screen Device utilize touch interfaces and industrial control cores to establish efficient channels between physical interaction and digital control. This technology not only simplifies operational logic in industrial settings but also empowers traditional equipment with intelligent decision-making capabilities, effectively creating an "industrial brain" through the deep integration of software and hardware.

If you would like to get the specification about above product, or you hope to discuss your requirements or need any additional information on our this product , then please do not hesitate to send us a inquiry and contact our sales team now.